Advise On Cams Or HFPC
The following 2 users liked this post by P1zzaman:
justnspace (02-27-2013),
RoadxRage (02-25-2013)
02-26-2013, 12:02 AM
#42
I got them Installed this week end!........WOW....WOW....Woot!
$80.00 for the Install is this a good price?
hell i do Not even care it was worth it!
It is so Much Fun to drive all you Acura tl mods users have been enjoying these for such a while i need to catch up.
What comes next any advice i been told MI 3.7
Does any one have this set up can you feel it when you punch it?
This Acura feels diffrent after XRl8 Cat back,j-Pipe,Pr2 Intake spacer,AEM Short Air Intake,and HFPCs
I want more!
And Thank you to all you guys who help me out with info and links.
02-26-2013, 09:36 AM
#43
Glad you are enjoying your mods dude but seriously you need to research around the forum, read the countless threads on everything you are looking for, and comprehend on what mods you would like or my not like to consider. Everyone goals are different; so you need to understand what YOUR goals are.
The following users liked this post:
Sonnick (02-26-2013)
02-26-2013, 01:16 PM
#44
Pro
iTrader: (1)
Just take it easy man, dont endanger anyone out on the road with your new lead heavy foot because of the new mods you have done. I dont want to see you in a few months posting pictures of your car looking like a smashed aluminum can.
The following 2 users liked this post by AccordFlex:
bmore07tls (03-01-2013),
EvilVirus (02-26-2013)
02-26-2013, 02:21 PM
#45
All motor
Honestly at this point, your next mod(s) should be the 3.7 intake manifold & throttle body, ported runners, and cams (not in any particular order). I'd recommend doing the manifold/TB/runners at the same time though, whatever you do. It's up to you what you want to do next. Btw, I forget, are you a base or Type S? 6MT or 5AT?
If you do cams, you MUST do a before/after dyno on the same dyno. If you don't, you're not allowed to get cams.
If you do cams, you MUST do a before/after dyno on the same dyno. If you don't, you're not allowed to get cams.
The following users liked this post:
thisaznboi88 (02-26-2013)
The following 2 users liked this post by EvilVirus:
bmore07tls (03-01-2013),
Sonnick (02-26-2013)
The following users liked this post:
bmore07tls (03-01-2013)
The following users liked this post:
Sonnick (02-27-2013)
02-26-2013, 08:31 PM
#51
Safety Car
iTrader: (5)
Ceramic coating just keeps the engine bay temps down a bit. Richie said most get it without the coating but some go the extra mile. I just put an order in for the HFPCs with the coating I figure why not it's only 80, some lugs get up near that price haha
02-26-2013, 10:00 PM
#52
Mine are NOT coated and they run and sound great!
I love this HFPCs Dude they are F'n Sick!
Last Night i went to the Ritch area of of my city and i drop on L to make a shit load off noise at 3:00 AM All the Cars And Trucks SUVs Alarms Went off!
ROFl....LOL get HFPC and go wake some people up.
I love this HFPCs Dude they are F'n Sick!
Last Night i went to the Ritch area of of my city and i drop on L to make a shit load off noise at 3:00 AM All the Cars And Trucks SUVs Alarms Went off!
ROFl....LOL get HFPC and go wake some people up.
02-26-2013, 10:10 PM
#53
Just to let you guys Know What i am doing next for my mod
I am going IM 3.7 and TB 3.7 Im now in contact with Mr. Bad Ass himself "gerzand" We will work out a deal and i will upload my gains and sounds And wake up even more people at 3:00AM ...........It is recommended that you listen to eminem "3 AM" Song at loud capacity!
When doing this!
LOL. at loud capacity!
I am going IM 3.7 and TB 3.7 Im now in contact with Mr. Bad Ass himself "gerzand" We will work out a deal and i will upload my gains and sounds And wake up even more people at 3:00AM ...........It is recommended that you listen to eminem "3 AM" Song at loud capacity!
When doing this!
LOL. at loud capacity!
Last edited by RoadxRage; 02-26-2013 at 10:13 PM.
02-26-2013, 10:20 PM
#55
Suzuka Master
iTrader: (2)
Mine are NOT coated and they run and sound great!
I love this HFPCs Dude they are F'n Sick!
Last Night i went to the Ritch area of of my city and i drop on L to make a shit load off noise at 3:00 AM All the Cars And Trucks SUVs Alarms Went off!
ROFl....LOL get HFPC and go wake some people up.
I love this HFPCs Dude they are F'n Sick!
Last Night i went to the Ritch area of of my city and i drop on L to make a shit load off noise at 3:00 AM All the Cars And Trucks SUVs Alarms Went off!
ROFl....LOL get HFPC and go wake some people up.
Just to let you guys Know What i am doing next for my mod
I am going IM 3.7 and TB 3.7 Im now in contact with Mr. Bad Ass himself "gerzand" We will work out a deal and i will upload my gains and sounds And wake up even more people at 3:00AM ...........It is recommended that you listen to eminem "3 AM" Song at loud capacity!
When doing this!
LOL. at loud capacity!
I am going IM 3.7 and TB 3.7 Im now in contact with Mr. Bad Ass himself "gerzand" We will work out a deal and i will upload my gains and sounds And wake up even more people at 3:00AM ...........It is recommended that you listen to eminem "3 AM" Song at loud capacity!
When doing this!
LOL. at loud capacity!
The following 10 users liked this post by anx1300c:
350 (03-01-2013),
Atlas.46 (02-28-2013),
bmore07tls (03-01-2013),
EvilVirus (02-26-2013),
ggesq (02-27-2013),
and 5 others liked this post.
The following 3 users liked this post by justnspace:
02-27-2013, 09:30 AM
#60
roadrage needs to go play in traffic! 
A 20-year-old driver suspected to be under the influence of drugs caused a major wreck in southwest Houston, detectives said.
Houston police said around 1 a.m., a driver headed north on Chimney Rock Road suddenly veered across the median and into oncoming traffic, slamming into an SUV traveling south.
Emergency crews transported the driver of the SUV to the hospital with minor injuries.
Detectives said the driver who caused the collision was also taken to the hospital, but not because of his injuries. Officers said he transported because he told them he had taken 10 hits of acid.
A 20-year-old driver suspected to be under the influence of drugs caused a major wreck in southwest Houston, detectives said.
Houston police said around 1 a.m., a driver headed north on Chimney Rock Road suddenly veered across the median and into oncoming traffic, slamming into an SUV traveling south.
Emergency crews transported the driver of the SUV to the hospital with minor injuries.
Detectives said the driver who caused the collision was also taken to the hospital, but not because of his injuries. Officers said he transported because he told them he had taken 10 hits of acid.
The following users liked this post:
bmore07tls (03-01-2013)
02-27-2013, 12:23 PM
#61
Burning Brakes
iTrader: (1)
luckily for us, most people interested in modding cars are not very interested in the TL because it is a very expensive platform to run boost on and NA builds are not frequent enough yet to be readily available.
The following users liked this post:
bmore07tls (03-01-2013)
02-28-2013, 03:49 PM
#64
All motor
02-28-2013, 06:28 PM
#65
And one of my fav. astronomers is Edwin Hubble and Galileo Galile.
I heel like a monkey ready to be shot out into outer space for the greater good!
thats how i feel behind the wheel.
The following users liked this post:
bmore07tls (03-01-2013)
03-01-2013, 11:24 AM
#67
I got them Installed this week end!........WOW....WOW....Woot!
$80.00 for the Install is this a good price?
hell i do Not even care it was worth it!
It is so Much Fun to drive all you Acura tl mods users have been enjoying these for such a while i need to catch up.
What comes next any advice i been told MI 3.7
Does any one have this set up can you feel it when you punch it?
This Acura feels diffrent after XRl8 Cat back,j-Pipe,Pr2 Intake spacer,AEM Short Air Intake,and HFPCs
I want more!
And Thank you to all you guys who help me out with info and links.
$80.00 for the Install is this a good price?
hell i do Not even care it was worth it!
It is so Much Fun to drive all you Acura tl mods users have been enjoying these for such a while i need to catch up.
What comes next any advice i been told MI 3.7
Does any one have this set up can you feel it when you punch it?
This Acura feels diffrent after XRl8 Cat back,j-Pipe,Pr2 Intake spacer,AEM Short Air Intake,and HFPCs
I want more!
And Thank you to all you guys who help me out with info and links.
Thank you!... to all you guys for helping me out with the info and links so i can read and study for my self.
Just Want some advise....Now that i have
Rv6 HFPCs, Cat back from Josh Resonated ,PR2 Spacer, Rv6 J-Pie,AEM Cold Air Intake, What else can i add to add a little more ponnies or torque , I Just Want my fix or i will start having MOD withdrawal symptoms.
Any Advise would be appreciated.....thank you.
I need my fix if i do NOT mod I will start having withdrawal symptoms.
Just Want some advise....Now that i have
Rv6 HFPCs, Cat back from Josh Resonated ,PR2 Spacer, Rv6 J-Pie,AEM Cold Air Intake, What else can i add to add a little more ponnies or torque , I Just Want my fix or i will start having MOD withdrawal symptoms.
Any Advise would be appreciated.....thank you.
I need my fix if i do NOT mod I will start having withdrawal symptoms.
03-01-2013, 11:38 AM
#68
Mine are NOT coated and they run and sound great!
I love this HFPCs Dude they are F'n Sick!
Last Night i went to the Ritch area of of my city and i drop on L to make a shit load off noise at 3:00 AM All the Cars And Trucks SUVs Alarms Went off!
ROFl....LOL get HFPC and go wake some people up.
I love this HFPCs Dude they are F'n Sick!
Last Night i went to the Ritch area of of my city and i drop on L to make a shit load off noise at 3:00 AM All the Cars And Trucks SUVs Alarms Went off!
ROFl....LOL get HFPC and go wake some people up.
The following users liked this post:
RoadxRage (03-01-2013)
03-01-2013, 11:55 AM
#70
I have the 3.7 setup intake manifold and tb with 4" intake I moved the sensor 3 away from the tb. And now with hfpc test pipe and atlp catback love It.
03-01-2013, 12:01 PM
#71
PCDs and mounts were fun I will tell you that.. Hell even the rear engine tq dampener that Accordcpe04 sells over on v 6 p was not fun to install. J-Pipe was easy when using a lift. The mounts and pcds were done while the car was on the ground.
03-01-2013, 12:32 PM
#72
Suzuka Master
iTrader: (2)
If u did that in my neighborhood I would be in my window with my AR aiming at your gas tank in the scope. Then guess what click click.... BOOM. I mean seriously, grow up kid. Slow your roll. Just last week u didn't kno the difference in the only 2 pullies made for our car and now ur talking about cams? Sit back read a little bit and make ur own decisions. Then when u actually kno a little bit about what your talking about u can ask questions. It's been really annoying watching u water down this site with useless posts. Every question u asked has been answered if your would just search
The following users liked this post:
RoadxRage (03-01-2013)
03-01-2013, 02:34 PM
#73
actually everyone i know with a TL does there own mods. Sorry you cant turn a wrench. I will do it cheaper then you mechanic
Seriously asshole? How is that a moronic statement? His statement about going thru rich neighborhoods sounding off car alarms was pretty moronic. And the government thinks they need to ban AR's cuz you have unstable idiots wanna shoot up schools and movie theaters. I am prior military and know how to handle my weapon. But if an immature kid comes thru your neighborhood and sets off your car alarm just for fun wouldnt you be pissed too?
03-01-2013, 03:18 PM
#74
I totally agree with you!
He is helping big brother take away our right to bear arms.
Violence only begets More Violence because some rightious ass-hole thinks he is the only one with a gun or as if learning to handle or fire a weapon is only learned in the military!
Reading the Bibble might help you aim better!
03-01-2013, 03:20 PM
#75
I want to do your set up how does it run? or when you floor it how does the power heel?
Driving in modded cars is so much fun!
03-01-2013, 03:49 PM
#77
Senior Moderator
iTrader: (1)
thread is closed.
Thread
Thread Starter
Forum
Replies
Last Post
ExcelerateRep
4G TL Performance Parts & Modifications
8
10-14-2015 08:20 AM
