someone help!! how do i remove radio?
i have to take it out to get the stupid radio code which isnt posted anywhere in the car. i bought private sale so no body knows this damn code! sucks big time!!! i have to leave soon for a trip and i need this radio for the ride. someone please help!!!!

 

Saltysteve,

Check the manuals. Maybe the previous owner wrote it down or put the card for the Radio and Nav code in between the pages. Good Luck.

 

Saltysteve, you sent an email to the Support section of Acurazine when you should gave posted your reply in this thread.

Open the glove box and look on the outside part of the left side of the box. Other places you might find the radio code are under the fuse box cover in the engine compartment. Look everywhere that might be a place someone would put the sticker with the radio code.

These threads from the 3G Garage may help you.

I-091: Radio Code
https://acurazine.com/forums/showthread.php?t=83025

F-052: DIY: how to remove the center dash and the 2 aluminum strips in the center console
https://acurazine.com/forums/showthread.php?t=90964
and here's another thread that's already in the garage (A-086) but will help here
https://acurazine.com/forums/showthread.php?t=130713

 

well i dont need to take out the radio at all.
if this was a sticky it would have saved me alot of trouble:
https://acurazine.com/forums/2g-cl-frequently-asked-questions-52/radio-code-solution-here-3g-garage-i-091-a-469527/

mods this would be one to sticky!!

 

wtf?
what do i do now?? my radio code isnt working!
i did everything right but its not working.
i had the serial number displayed on the radio- called acura and got my code.
i unplugged the car battery and waited.
i then plugged in batt.
turn key to acc
turn on radio
it displays "CODE''
i enter in my code
and boom- err1

sucks i did this over and over again and i dont know what else i can do.
anyone know??????

 

Double check the code. My codes are on white stickers attached to the drivers outside of the glove box door.

 

remove anntena?

 

I made it a sticky and I added it to the 3G Garage.

 

Are you entering the code using the radio preset number buttons? Or on the touch screen? Use the radio preset buttons.