Here is some info I found on the new Rockford signal processor. Debuted at CES this week. Looks like it was made for the TL. Cleansweep killer. It will come in 2 versions, 3sixty.1 and 3sixty.2. I want the 3sixty.1.

There is a big discussion going on here:

http://www.carsound.com/UBB/ultimate...8;t=010916;p=1




3sixty.1
-$399.99 MSRP
-$299.99 MAP
Will ship March 1, 2006

1.75" H x 7.25" W x 4.25"D

24bit D/A

Music sensing remote turn-on

Programable Inputs
-2 to 6 channel inputs
-Up to 20v RMS input
-Channel Summing
-can accept both RCA and speaker level inputs at same time
-Signal presence and Clip indicators

Line Driver/High volt outputs
-'conservatively rated' at 5v RMS

Programable (knob) controller
-master volume/sub level
-Aux input toggle

Wireless (PDA) control interface
-Real-time control
-Your Palm OS (5.0 or better) PDA w/ Bluetooth required

EQ
-Auto Normalization with visual verification of frequency response
-Front L&R channels: 5 band
-Rear and Center channels: 4 band
-Subwoofer channel: 2 band
-Boost or cut +/- 10dB


3sixty.2
-$699.99 MSRP
-$599.99 MAP
24bit D/A

Will ship March 1, 2006

1.75" H x 7.25" W x 4.25"D


Music sensing remote turn-on

Programable Inputs
-2 to 6 channel inputs
-Up to 20v RMS input
-Channel Summing
-can accept both RCA and speaker level inputs at same time
-Signal presence and Clip indicators

Line Driver/High volt outputs
-'conservatively rated' at 5v RMS

Programable (knob) controller
-master volume/sub level
-Aux input toggle

Wireless (PDA) control interface
-Real-time control
-Your Palm OS (5.0 or better) PDA w/ Bluetooth required

EQ
-Auto Normalization with visual verification of frequency response
-Front L&R channels: 31 bands each
-Rear & Center channels: 27 bands each
-Subwoofer channel: 10 band
-Aux Input with it's own 31 band EQ
-Boost or cut +/- 10dB

X-over
-50Hz to 10kHz
-62 steps on ISO 1/3 Oct centers
-selectable 12/24dB per Octave slope
-HP/LP/BP/AP (50-200Hz LP filter on sub)
-Independent filter control for all channels
-Independent level control for all channels
-Independent muting control for all channels

Adjustable sub-sonic filter
-20 to 35Hz
-selectable 12/24dB per Octave slope
-1Hz steps

Time Alignment
-10' total adjustment
-6" increments

 

That thing looks AMAZING! Definitely what we need.

Only thing is I wish they made it controllable by Windows Mobile w/bluetooth as well. I have a Dell Axim... I'm sure they'll come out with Windows Mobile software by the time it's released.

 

Thats a nice unit ... Alpine has stepped up with one too ... it seems like it will be a good year ... hopefully the Alpine Unit is at least Front,Rear+Sub ... if it is ... JL is gonna loose some market share

 

can someone explain what this thing does?

I'm stupid when it comes to this...

 

You can plug the factory audio inputs from the stock stereo, and give you back on the output a clean flat signal like an aftermarket stereo would. It let's you add amps and speakers without loosing quality due to the poor signal modifications made by the stock stereo.

 

Here's a picture. Looks about the same size as the cleansweep. I am planning to use the audiocontrol matrix in my install until this comes out. Seems to do alot in a little box.