Help installing Sokolov Navi conversion unit
#1
4th Gear
Thread Starter
Join Date: Dec 2004
Location: Oakville, Ontario
Age: 52
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Help installing Sokolov Navi conversion unit
I'm just in the process of installing the plug-and-play version of the Sokolov Navi conversion unit. When the switch on the unit is switched on/off, the screen in the car remains on the navigation image (it does not switch to the external video source). The wires inside the unit appear to be connected fine. I contacted Vitaliy about this problem and he said:
"You have to ground 2 white wires and a green wires."
I asked him if he meant the wires on the harness and he said:
"Those wires coming out right from the unit."
However, I don't see any wires coming out of the unit (other than the wires for the switch). There are wires on the harness. Does anyone know what he's talking about? What wires am I supposed to ground?
Thank you.
"You have to ground 2 white wires and a green wires."
I asked him if he meant the wires on the harness and he said:
"Those wires coming out right from the unit."
However, I don't see any wires coming out of the unit (other than the wires for the switch). There are wires on the harness. Does anyone know what he's talking about? What wires am I supposed to ground?
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Soul_Deamon
Audio, Video, Electronics & Navigation
7
11-13-2018 04:44 PM
Gianni Formica
3G TL Audio, Bluetooth, Electronics & Navigation
1
09-07-2015 08:28 PM
yahelou
3G TL Audio, Bluetooth, Electronics & Navigation
1
09-06-2015 09:12 PM