OK, fantastic shipping, ordered it yesterday, recieved it today.

Just a few questions on everything

- 2 white wires coming out of main unit = ground?
- green wire = "hand brake" (ground of course)
- 2 wires coming off the push plug for the units powoer - 1 power 1 ground (1 labeled power, the other ground?)
- 1 wire coming from DB9 cable - ground
- blue wire (12v camera) - goes to the 12v on the reverse lights?

So if i'm correct, i'm grounding 5 wires?

 

huh? I don't have that - I do have the on/off switch that controls video 1.
I did not connect this at all, not even ground.
Yup!
Yup!
Yup!
1 for harness
1 for reverse light
1 for power

What I did was bunch these three together and cramp them to a U connector and bolt that to the default location.

 

pics to show what i'm talking about

white is twisted with a green and the other white is twisted with the blue

 

White ones are the ground. I untwisted the blue/white (camera trigger) and bunch the white one, with the power ground (black) and the harness (black), cramp them all together, and then bolt it to the ground bolt.

 

gotcha, thanks

 

So u didn't ground the green wire?

 

From post #2: