tl-frank

So ive looked around to see if there was a thread like this already and didn't see anything so if there is pleas excuse me and lock this if there is...

So 1 easy rule just post to what ever you did to your car today it doesn't matter if it's just a small random thing like put gas, drove, it or anything. ..
You can post pics if you want...


So ill go first today I finally didn't have to work on Saturday so it freed up alot of my time so I took it to get the oil changed on my car and put on my mugen license plate bolts that I had from my last car...

07TLGUY

Hey man. It was a balmy 50 degrees here in the NE, so I dragged out the hose and washed and vacuumed out my TL.

justnspace

iTrader: (1)

my tl is in the shop. :/

icy2

Drove mine to work

jhikol

Took mine for a spin from LA to San Diego for a meet!!

JTS97Z28

iTrader: (4)

Drove mine to work and will be driving it back home from work. Working on a Saturday night, the life of an air traffic controller....woohoo

1black_seven

iTrader: (2)

Wash wax and weight reduction!

tl-frank

Went and got it fully detailed

tl-frank

Ne=new england. ..Ifso omg im a huge patriots fan....im planning on going to Massachusetts this year

KungFuWaffle

Picked up some used OEM visors and some H-tech springs, and also drove around town trying to figure out which pharmacy had my prescription...

Drei

iTrader: (2)

Got my LED backup reverse lights, installed them right away!

Damin1123

Stared at it and realized I have a lot more modding to do..

tl-frank

Lol im the same way don't know where to start

justnspace

iTrader: (1)

tell us how the cops showed up and made every one go home!!

LockDots

You mean like this one? https://acurazine.com/forums/3g-tl-2004-2008-93/what-did-you-do-your-3g-today-859281/

Due_Diligence

sprayed liquid wrench on rusty bolts count?

raindogt

Changed my oil and cussed at how hard it was to get the filter off. Stubborn SonOfA....
Washed it and got it looking pretty yesterday.

07TLGUY

Hi. yes, NE = New England. Come and visit the cold weather.😁

cruc1a7

buff clear coat scratches from previous owner

ez12a

started her up for the first time in a week. I think my battery's a little on the worn side as it barely was able to start (gauge cluster went completely dark for a good second while cranking).

my moto has nearly replaced my TL in day to day tasks.

jhikol

So we were just hanging around and they came asking for a permit. I didn't hear quite the conversation with on of TSX guys but at the end we had to wrap it up!

justnspace

iTrader: (1)

sucks for the guys that traveled.
i heard through a 2nd gen TSX member that some gay cop told ya'll to put ya'lls little ricers up.

romeotl3

since i had to pick my parents up from the airport at 5 am and had work at 10am i cleaned my trunk out for the weekend when i add that weather rubber trunk oem mat I am Sooooo frekin tired! ;(

Vlad_Type_S

iTrader: (3)

I had the cekc in it.

1black_seven

iTrader: (2)

Ran the track!
Pretty sure I could have done better by not bouncing off my rev limiter for two gears.
I'm left

rubenders

Installed mt aspec suspension on my 07 types s at

justnspace

iTrader: (1)

I dont think I'm smart enough for that one.

Nick216

Sex?

Nmm555

Got an alignment and drove to work.

Vlad_Type_S

iTrader: (3)

Nick gets it.

Then I drove it to work.

Big plans for this summer though.

jthiessens

Got my key blade cut and fix the switchblade so it will stay completely closed

ct_ua6

Drove mine around today, still mastering the clutch-- newbie when it comes to MT cars

tl-frank

Drove mine to work and the gym....thinking I might need an alignment pulls a little to the right=/...

tl-frank

@cruc1a7 how did you go in the process of removing the scratches I need to that to mine ive noticed light scratches on my driver door thinking its my kids and neighbor kids with there damn bikes and scooters

07_TL_S

Install my motor mounts

tl-frank

Oem replacement or aftermarket

Acuramon

Ordered a dash cover (I saw my first crack in the dash a few days ago) and made an appointment to get my front brakes done.

Tmerema

Installed a new cabin air filter after reading a thread last week with pics showing how nasty his was. Mine was not much better. Managed to only break one metal clip post off! Winning

justnspace

iTrader: (1)

it's a pretty in-depth process.
always wash the car with the two bucket method with grit guards.
then use a clay bar to get rid of any surface contaminants.
next up, is polishing. you'll use a machine and an abrasive product with a matching pad..
this is called polishing the car and will remove any imperfections in the paint, such as swirls and scratches. it takes time. a couple of passes!
usually 1 pass with a cutting product, and then another pass with a finishing product and pad.

after this, seal the car with either a sealant or wax. hint* a sealant last longer

takes me about 12 hours for 1 car.I like my cars to be perfect and i pay attention to every detail.

youtube shows this process through videos if you cared enough and didnt really grasp what I typed up

Danith93

Just got my TL about 3 weeks ago and I already got a seized caliper so I changed that out with a buddy, while I was down there, changed out the pads and rotors as well.