type s exhaust on a 05 TL
#1
type s exhaust on a 05 TL
i have a 05 tl and i wondering if i could put the 07 type s exhaust on it without changing the bumper or anything just swap the exhust because i like the way it looks
So you think i can do that???
So you think i can do that???
Trending Topics
#8
u cut the inside of the skirt slightly ill take pics of the cuts but so far this is what i got.
I cut the skirt on the inside by the longer tip.... the other side didnt really have to be cut. i got it, installed it and cut the mid muffler out. sounds silly!
I cut the skirt on the inside by the longer tip.... the other side didnt really have to be cut. i got it, installed it and cut the mid muffler out. sounds silly!
#9
what I realized is that the type s skirt is flared out more on the outside to fit the tips n muffler but the extra beef on the sides doesnt really make a difference in fitment so im thinkin acura did that for the aggressive stance of the type s and obviously fitting of the tips
#13
Originally Posted by Tripnbeats
WTF r u all talking about? i did it friday
...ok well your exhaust is sitting like 4" lower than the top of the exhaust outlet on ur aspec. I wouldn't call that a "perfect" installation, but it looks good
#15
^^^ Love the enthusiasm! I wanted to do this but I'm not going to attempt cutting or whatever into my bumper. I'll be happy with some single pipes ...OR I'll just resort to getting 2 fart pipes and putting them in!!
#18
Looks good, can you take some closer pics of the cuts that you had to make! Where did you get the type S mufflers? I got a quote at the dealer for just the mufflers and it was over 500!! Some help finding some less expensive type S mufflers w/ tip would be great.
#20
lol ill have closeups in the AM and ballin ur wrong it sits an inch below......thats acceptable since it is a bolt on. the aspec from 05 seems longer and the exhaust seems like it sits in further. thats all.
#21
Originally Posted by Tripnbeats
lol ill have closeups in the AM and ballin ur wrong it sits an inch below......thats acceptable since it is a bolt on. the aspec from 05 seems longer and the exhaust seems like it sits in further. thats all.
#23
I got the mufflers from an online dealer for about 600 shipped. I can do anyones as long as u have the pieces before I leave. and yes u can do it on the car without the lip. here are the cut close ups....the only cut and how low they sit....I have no idea what ballin is talkin about, so i took some pics and ill let u guys decide.
#28
94 DC4 RS LSV/Turbo
iTrader: (1)
Joined: Jul 2007
Posts: 11,734
Likes: 11
From: New York City | Stuck in Traffic
Originally Posted by XjoEnX
looks good! does this exhaust bolt right up to the 04-06 from the cat back?
#30
Originally Posted by stillhere153
Yes it does... but... to fit it with the stock bumper it migh turn into a headache... with the type s rear aspec lip it fits perfect
#33
DUDe THATSS SICKAAGEE link the DEALER Site
i was just about to buy some magnaflow but i way rather go
with the QUADS looks HOT. Quick how long did it install take about just two cuts
and once you cut off the stock ones they just slip right into place?
i was just about to buy some magnaflow but i way rather go
with the QUADS looks HOT. Quick how long did it install take about just two cuts
and once you cut off the stock ones they just slip right into place?
#39
94 DC4 RS LSV/Turbo
iTrader: (1)
Joined: Jul 2007
Posts: 11,734
Likes: 11
From: New York City | Stuck in Traffic
Originally Posted by K.Rock
Do you have to get it all from the cat back or can you just bolt up the Type S Mufflers?
#40
ummm no..... you buy the whole thing from the cat back. thats why its 600$ otherwise you would be paying 380....the y pipe consists of the whole system 1st res, 2nd res, y pipe n muffler the drivers side is only the muffler.