All I need to know is if when you take out the amber side marker, do the signals still flash orange? or are they white bulbs? Oh and if they are white, is it legal to have white turn signals? sorry for my newbishness lol

 

The bulbs are not amber. They are a yellowish white. In most states you are allowed white or amber front turn signals. Check your state laws to confirm.

 

I'm not sure if it's legal or not...but I've never heard of anyone being pulled over for different colored turn signals...I might just go ahead and do it. opinions?

 

I kept mine white but I think I will upgrade to LEDS soon just cause the white looks dull next to the hids of the headlights. Plus I couldnt find a damn place that sold amber 7443 bulbs.

 

Here's a pic of the stock turn signal bulbs, I eventually bought LED switchbacks.

 

do you mind me asking where you got your switchbacks from?

 

do switchback require special resistors to blink correctly?

 

yes they require a load resistor to be place on each side if you want them to blink at a normal rate. Really easy install, theres a DIY in the garage and the switchbacks are plug in play.

 

http://cgi.ebay.com/ebaymotors/ws/eB...3A11&viewitem=

 

I got chrome bulbs that blink amber. Looks good for now but i am gonna upgrade to switchbacks. But like everyone says so far check with laws in ur state.

 

nate-- do u have any other pics of your headlights?? is the turn signal reflector all blacked out?? can u see the blinker during the day?? i wana get led switchbaks but am concerned with the day time signal. im sure at night its bright..

 

Hey I read up on these and saw a writeup where the person soldered them into the headlamp...does that HAVE to be done? because I have no clue how to solder

 

vleds.com you need bulb size 7443
as others mentioned get the resistors too

 

thanks Carrie! (if that's your first name lol), and like I previously asked, does anyone know if you HAVE to solder them in?

 

yea that's my first name
and no they are plug and play

 

haha o.k., and thats awesome! I'm totally gonna get those. thanks a lot for the help!

 

no prob, here is the link

these
http://www.v-leds.com/Exterior-LED/T...68714-1-2.html

and these
http://www.v-leds.com/BlinkerWarning...83296-1-3.html

and at checkout try to enter the code ACURAZINE or CLUBLEXUS and you may get 10-15% off

 

I have my turn signal reflectors blacked out and the switchbacks are still really bright during the day. Nothing to worry about there, they just look even brighter at night. I used a high gloss heat resistant paint for the headlight so i dont know if that helping, im guessing it does because it reflects alot during the day and night.

 

I used a low gloss black to paint my reflectors. If I had to do it again, I would have taped off the back of the reflector, than painted the rest of the turn signal. Mine is very bright during the day but my mirror blinkers take car of that matter. During the night the turn signals are fairly bright and noticeable.

 

you are the most helpful person I've met on here lol, and that site is really cool!
I think I'm gonna get these:
http://www.v-leds.com/Exterior-LED/T...-p5168714.html
and the 6 ohm resistors

 

yea, those are the ones!!!
and yes this site ROCKS! hahaha

 

nate- "I would have taped off the back of the reflector, than painted the rest of the turn signal"..... ??back?? so you would have left some of the reflection on?? jnc hookin me up.. im just considering v1 or v2.. I wana go completely blacked out but dont wana sacrifice performance. thanks bro...
carrie.-- the sites u posted with the switch bcks and the resistor are the "best" ones to get?? im gettin my head lights done and im lookin to get em done right..thanks..
madsick-- good looks..

 

jnc does awesome work! and I think the ones posted are the best ones, they are what I have. Another member here painted mine and they look awesome, try it, here is a pic of what they look like painted, I think they look a million times better

 

^^^much help thanks..

 

that does look sick! but that seems like it would be really hard to do

 

nope, it was easy. Just cut some painters tape into little strips and wrap it around the lights. Then for the lights on the top just cut some little squares to put over them, paint and you're good!

 

Well I stand corrected then lol, thanks for all the help Carrie!