OnefastTL448

iTrader: (1)

Ok Guys Proto type will be done in 2 weeks for test fitting. They will 100% work with our pedal design. The maker is going to cut them to the exact specs of our pedals.

The pedals will look 100% like the picture below only it will say Acura. The pedals are top quality that they use in Mercedes AMG department. They are non slip and the black you see is rubber that comes up threw the peddle to hold traction. The rest of the redal is stainless steel.

I would need 35 orders to go ahead with the project the retail delivered price to your door would be 119.00.

After we confirm a fitment with the test pedals I can have them ready to go by the beging of May.

I think they look hot let me know all your thoughts if I can get 35 people we will start a group buy,

Get me some feedback guys.

Thanks
Dave

xlilbluux

i wish i had a TL to buy pedals for.

zax123

Is it just me or does the brake pedal look a little big? I assume the pedals in the picture aren't the size of the pedals for the TL right?

OnefastTL448

iTrader: (1)

Here is a photo shop of what they will look like courtsey of ViperGTP

Hawhyen51

Dave, what's included in the set? Brake/Clutch, Dead Pedal & Gas (6MT)/Brake, Dead Pedal & Gas Pedal (5AT)?

OnefastTL448

iTrader: (1)

No guys these are just a sample of the quality and the overall look. Our pedals will be cut 100% to spec on our cars so they will not have the same size as these but they will have the same style.

OnefastTL448

iTrader: (1)

What is included.

Brake/Clutch, Dead Pedal & Gas (6MT) Brake, Dead Pedal & Gas Pedal (5AT)

Sorry I was not clear thanks

Hawhyen51

Dave, one more question ..... because of their size, will the clutch/brake pedal have the rubber inserts (non-slip factor)? And the mounting hardwarer is included, right? Will you have pix of the prototype?

J RIDE 81

I would invest that kind of money for pedals that say A-SPEC. Without A-SPEC I don't think i'll be involved this time. Sorry.

OnefastTL448

iTrader: (1)

J Ride 81, I have an a-spec too and I want to get it done that way also but as far as cost goes I cant make it cost effective. I will see what I can do about getting a small batch of sills and pedals done in aspec and selling the sills and pedals as a package at a litte higher price to eat up some of the cost. I might be able to get it created then,

OnefastTL448

iTrader: (1)

Hawhyen51

Yes all pedals regardless of size will be designed to have the anti-slip rubber just as in the picture, All hardware will be included also.

Yoda117

here's one...

what kind of drilling, etc. will need to be done to fit these puppies in?

If they are done to spec, then I'm in... and maybe go after some of those door sills as well (BTW: did you ever post some actual installation pics on those?)

OnefastTL448

iTrader: (1)

Door sill install pics are up go to the group buy section. The group Buy is almost over better jump in over there,

The pedals should be a pretty easy and with me it must always be clean. I should here back from the maker with exact install specs soon. We will draw up directions for this item too.

RawDogg

Well I am FIRST in line.... Just let me know when and where to send the Deposit!!!

Yoda117

No Sup... I mean pics of how you installed them, not after they were installed (good pics though).

I just want to know if installation involved any drilling

AdamNJ

I might be interested after I see a pic of the actual prototype.

OnefastTL448

iTrader: (1)

Yoda as far as the sills go no drilling what so ever, The line runs under the weather stripping, Take a look at your car the weather stripping pulls right up, "Its removable" Then the sill pulls right off, You put the cover on run the line and put the weather stripping back on. Call me to discuss further if you are unsure.

Dave

PS

Proto type pictures of the pedals will go up once they come in, I can only produce them if I get atleast 35 orders.

sftroy

I like the look of these pedals and I'll commit if they fit the TL pedal design - including the gas pedal which has that funky angle. Also, what about the hardware and installation info? Included?

Can't wait to see the protos...

AChan123

Me too...

jhunter9999

count me in

BukvaMan

if it is what you say then im really for it - Those really look great havent seen better ones yet ...

iLL TL

count me in guys!

Lokius

im in

Salut

Question...

Do you still guarantee $119 delivered to Los Angeles... (I have 6MT)

Thanks for the info...

Cheers
ciao

Rak6spd

those look nice, i'd be interested to see the actual prototype as well.

audi_to_TL

iTrader: (2)

those look hot......im in

OnefastTL448

iTrader: (1)

Thanks Guys once the proto is in and all check out we will start the group buy. As long as I have 35 orders we will do it. Again we will give this item the same customer policy, If you dont like it send it back in like new condition, This way you can try them out. Stay tuned for the group buy in about 2 weeks when I get the final proto and test fit them and check them for quality.

Thanks
Dave

Weekendzs

Count me in on this they look good.

Salut

Previous question...

https://acurazine.com/forums/showpos...8&postcount=24

Thanks

Ciao

OnefastTL448

iTrader: (1)

Sorry Salut , Yes we do for all 48 States, HI, Alaska and Canada or Extra.

Treblig

I already have the Ultimate Pedal set, but I would certainly consider these depending on how the prototypes look.

Salut

Thank you for the response Supercomp... Yes you may count me in... I will PM as well to confirm...

Regards
Ciao

NOX 3.2

Do these pedals use the screws to hold them in place (I like this),
or does it have those little arms and springs that clip to the existing pedal ?

VelfarreClubber

Good question NOX. Put me in for a set, just as long they don't go over the exisiting pedals. Also good find Supercomputers, these are the style that i've been looking for. Ultimate pedals is just plain UGLY !

SparkAF

Count me in for a set

OnefastTL448

iTrader: (1)

OK Guys we are going to go forward with this project. Stay tuned for updates, After getting off the phone this morning with the maker I might be able to have a final result in hand soon. These pedals will screw in like everybody wants, As soon as I get the first proto type we will in stall them and post pics, Stay tuned the feedback has been great.

6mtV6

These pedals are nice. I'll be interested.
How hard would the install be?

Yoda117

About the screwing installation... as long as we don't have to actually drill into the support arm (a la ultimate pedals), then count me in.

I'm not big on voiding the warranty on any parts of the car

vidoprof

Dont ya think the 5AT should be less since you are getting less hardware. I like the design but I think us 5AT people should get a discount for not getting as much hardware.

I might be in..

Let me know about the group buy.

Ryan

OnefastTL448

iTrader: (1)

Ryan you are right but the 6mt might be a few dollars more but I am going to try and absorb that cost on my end to keep the price the same for all.