Custom Third Brake Light by AckTL05.
#1
Custom Third Brake Light by AckTL05.
Hello Everyone. As some of you may know I make custom tail lights for the Third Generation ACURA TL. I recently figured out how to modify the third brake light, which is the tail light on the upper portion of the back window. Install is simple and the cost for these will be $20, pay pal and shipping included. My pay pal is s0574049@monmouth.edu. All you need to do is send payment as a gift on pay pal and put in a note that says “ACURA third brake light”, or "TYPE S third brake light", for your order. Custom orders to get your saying will be $25. I try to check my E-Mail at least three times a day, so once payment is received I will send out the package first thing the next morning. Below are pictures of the modification on my car and how it will look when the brakes are pressed.
Last edited by AckTL05; 03-15-2010 at 11:24 AM.
#2
So everyone knows: I just placed the order on 3/15/2010 and the first batch will be here within the next week. Anyone placing an order from now and until the first batch gets here will have to be patient until they arrive. Anytime after the first batch, I will keep these in stock and they will be sent out as orders come in. Thank you!
Trending Topics
#10
Veni, vidi, vici
I need pic's bro, for quality and blah blah blah.
Can you make it so that is says " type-s" or " I'm the Best" or " I <3 Jesus" ???? or " Baby on Board" or "BORICUA" or "SEXY TIMES"
THAT would be cool, because I'm pretty sure ppl know what an Acura is when they see it, I don't think TLer's need another sign (for those who don't debadge the trunk of "ACURA" and "TL" pieces) that says "ACURA" on the stoplight IMO.
but the idea is good anyway.
Can you make it so that is says " type-s" or " I'm the Best" or " I <3 Jesus" ???? or " Baby on Board" or "BORICUA" or "SEXY TIMES"
THAT would be cool, because I'm pretty sure ppl know what an Acura is when they see it, I don't think TLer's need another sign (for those who don't debadge the trunk of "ACURA" and "TL" pieces) that says "ACURA" on the stoplight IMO.
but the idea is good anyway.
#11
Why wouldn't it? It still lights up red like a brake should. I made the "ACURA" as big as I could to fit the light and the design I have gives a distinct look. It still shines as bright as it should. Normally cops tell me the VINYL people put on their tail lights lens is illegal. This is not covering the light at all, it is simply making a design.
#14
I need pic's bro, for quality and blah blah blah.
Can you make it so that is says " type-s" or " I'm the Best" or " I <3 Jesus" ???? or " Baby on Board" or "BORICUA" or "SEXY TIMES"
THAT would be cool, because I'm pretty sure ppl know what an Acura is when they see it, I don't think TLer's need another sign (for those who don't debadge the trunk of "ACURA" and "TL" pieces) that says "ACURA" on the stoplight IMO.
but the idea is good anyway.
Can you make it so that is says " type-s" or " I'm the Best" or " I <3 Jesus" ???? or " Baby on Board" or "BORICUA" or "SEXY TIMES"
THAT would be cool, because I'm pretty sure ppl know what an Acura is when they see it, I don't think TLer's need another sign (for those who don't debadge the trunk of "ACURA" and "TL" pieces) that says "ACURA" on the stoplight IMO.
but the idea is good anyway.
If people know what an ACURA is then they will know what a TYPE-S is also, . When you get out of control with I'm the best and such is when trouble will arise. I am in the middle of custom fitting "TYPE-S", which should be up shortly.
#16
Veni, vidi, vici
I would get the Type-s back light instead of Acura. I think it would look better. Good Job though, never seen this mod before.
Last edited by Bayam0n; 03-15-2010 at 11:41 AM.
#18
Understandable, but this is just something to make the third brake light more unique and get rid of the red on the back window. I have tints and it "completes" my back window. I will post pics up in a little bit. It only appears when the third brake light is lit up and fitting something with more characters than "ACURA" will compromise room for letters.
#19
Drifting
iTrader: (13)
Not to shit on your thread, but what exactly are we getting for $25? Just a vinyl overlay for the 3rd brake light?
If that is the case, these have been available for some time now at a significantly cheaper price.
If that is the case, these have been available for some time now at a significantly cheaper price.
#22
Here are pictures during the day. You guys can see how it "completes" and covers the third brake light. It gets rid of that redness in the window. The $25 covers shipping costs, since I will ship them out in a bubble wrapped manilla envelope, and pay pal fees. I am using 'high performance' if you will, vinyl, which is the same that I used for mine. Mine is going on five years and still looks new.
#23
Pro
Actually that looks really good and flush...it even looks good when the light is turned off. I will probably get it just to get the red off the rest of my tinted window...it gets pretty annoying when backing up.
#29
Racer
iTrader: (1)
Man, was I confused. I thought you manipulated the LEDs in the TBL to spell out ACURA but it's a cut-out for that portion of the back window normally neglected when folks get their tint and don't pop the TBL cover off. For those people, yeah, this is definitely a necessity. And it is tight how visible it is when not on the brake.
BUT for those who popped the cover before tint, do like myself and others have done and buy the TBL overlay. I only spent 13.75 shipped. And Baya, like anything else, this is just something you can't judge by a photo. Especially the color red which bleeds and is extremely hard to photograph
BUT for those who popped the cover before tint, do like myself and others have done and buy the TBL overlay. I only spent 13.75 shipped. And Baya, like anything else, this is just something you can't judge by a photo. Especially the color red which bleeds and is extremely hard to photograph
Last edited by ciscopath; 03-16-2010 at 01:21 AM.
#30
There is one reason why I do not like that, it kills light output. Mine uses all of the brake light in the transition to "ACURA", when that one blocks the LEDs. Not sure if you can see yours in the day time, but mine you can. Also, do you have any problems with them being on the light so close? I know when I have tint on my tail lights, they started to melt to the light because of the high output of heat from the LEDs. I just talked to my guy and I can do 20 shipped, since I am going to buy in bulk. I can make your tail light say anything, but that's $25 because it will be a custom order.
I am also getting in bulk, "TYPE S", so those will be $20 shipped as well.
Mod's please change whole first paragraph to this:
Hello Everyone. As some of you may know I make custom tail lights for the Third Generation ACURA TL. I recently figured out how to modify the third brake light, which is the tail light on the upper portion of the back window. Install is simple and the cost for these will be $20, pay pal and shipping included. My pay pal is s0574049@monmouth.edu. All you need to do is send payment as a gift on pay pal and put in a note that says “ACURA third brake light”, or "TYPE S third brake light", for your order. Custom orders to get your saying will be $25. I try to check my E-Mail at least three times a day, so once payment is received I will send out the package first thing the next morning. Below are pictures of the modification on my car and how it will look when the brakes are pressed.
I am also getting in bulk, "TYPE S", so those will be $20 shipped as well.
Mod's please change whole first paragraph to this:
Hello Everyone. As some of you may know I make custom tail lights for the Third Generation ACURA TL. I recently figured out how to modify the third brake light, which is the tail light on the upper portion of the back window. Install is simple and the cost for these will be $20, pay pal and shipping included. My pay pal is s0574049@monmouth.edu. All you need to do is send payment as a gift on pay pal and put in a note that says “ACURA third brake light”, or "TYPE S third brake light", for your order. Custom orders to get your saying will be $25. I try to check my E-Mail at least three times a day, so once payment is received I will send out the package first thing the next morning. Below are pictures of the modification on my car and how it will look when the brakes are pressed.
#33
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
There is one reason why I do not like that, it kills light output. Mine uses all of the brake light in the transition to "ACURA", when that one blocks the LEDs. Not sure if you can see yours in the day time, but mine you can. Also, do you have any problems with them being on the light so close? I know when I have tint on my tail lights, they started to melt to the light because of the high output of heat from the LEDs. I just talked to my guy and I can do 20 shipped, since I am going to buy in bulk. I can make your tail light say anything, but that's $25 because it will be a custom order.
I am also getting in bulk, "TYPE S", so those will be $20 shipped as well.
Mod's please change whole first paragraph to this:
Hello Everyone. As some of you may know I make custom tail lights for the Third Generation ACURA TL. I recently figured out how to modify the third brake light, which is the tail light on the upper portion of the back window. Install is simple and the cost for these will be $20, pay pal and shipping included. My pay pal is s0574049@monmouth.edu. All you need to do is send payment as a gift on pay pal and put in a note that says “ACURA third brake light”, or "TYPE S third brake light", for your order. Custom orders to get your saying will be $25. I try to check my E-Mail at least three times a day, so once payment is received I will send out the package first thing the next morning. Below are pictures of the modification on my car and how it will look when the brakes are pressed.
I am also getting in bulk, "TYPE S", so those will be $20 shipped as well.
Mod's please change whole first paragraph to this:
Hello Everyone. As some of you may know I make custom tail lights for the Third Generation ACURA TL. I recently figured out how to modify the third brake light, which is the tail light on the upper portion of the back window. Install is simple and the cost for these will be $20, pay pal and shipping included. My pay pal is s0574049@monmouth.edu. All you need to do is send payment as a gift on pay pal and put in a note that says “ACURA third brake light”, or "TYPE S third brake light", for your order. Custom orders to get your saying will be $25. I try to check my E-Mail at least three times a day, so once payment is received I will send out the package first thing the next morning. Below are pictures of the modification on my car and how it will look when the brakes are pressed.
Done.
#38
It definitely doesnt look like something just stuck to the window. I would be interested in this too. Looks cool. It may be my first physical mod (since I did hack the navi a few months ago).
#39
I custom made it to fit on the outside so that all of the light would be used, the letters could be bigger and to make it look flush (especially if you have tints). When you put the VINYL on the LED board you risk it melting to the light and you sacrifice light output since you cover the light where you don't need it. You can also see mine during the day