Custom Headlights by JnC, continued.
#403
Blacked out v2, ZKW Lense Swap, 85122+, Switchbacks
For a 2005 Acura Tl Base Model how much would they cost just to buy flat out.
reason i ask is bc i think the previous owner of my car did something to the passenger side n it looks like clear coat was sprayed over it.
For a 2005 Acura Tl Base Model how much would they cost just to buy flat out.
reason i ask is bc i think the previous owner of my car did something to the passenger side n it looks like clear coat was sprayed over it.
#406
#410
Former Sponsor
Thread Starter
iTrader: (12)
Yes the internals are interchangeable between the base and type S.
Blacked out v2, ZKW Lense Swap, 85122+, Switchbacks
For a 2005 Acura Tl Base Model how much would they cost just to buy flat out.
reason i ask is bc i think the previous owner of my car did something to the passenger side n it looks like clear coat was sprayed over it.
For a 2005 Acura Tl Base Model how much would they cost just to buy flat out.
reason i ask is bc i think the previous owner of my car did something to the passenger side n it looks like clear coat was sprayed over it.
Replied.
#412
Former Sponsor
Thread Starter
iTrader: (12)
lacrossekid1010's headlights
04-05 TL headlights
Blacked out V2
Painted fog light bulb cover
Carbon Fiber Inlays
LED strips
Install the LED strips on lacrossekids request, I still dont recommend them as they are not reliable at all.
Blacked out V2
Painted fog light bulb cover
Carbon Fiber Inlays
LED strips
Install the LED strips on lacrossekids request, I still dont recommend them as they are not reliable at all.
#413
Former Sponsor
Thread Starter
iTrader: (12)
Updated List
04-05 TL
DecaFe1-- Blacked out V2 with partial amber diffuser
04 TL 04-- Blacked out V2
Yukoncole-- AM Colormatched V2, painted fog light cover
APNorm-- Blacked out V2, CCFL, painted fog light bulb cover, carbon fiber inlays.
06 TL
thechamp531 -- Cleared, ZKW Replica
swttl1985-- Blacked out V2, painted fog light cover
07-08 Base
Baxton -- Blacked out V2, ZKW-R
07-08 Type S
wdp415-- Blacked out V2 with CF inlays
andyc123-- Blacked out V2
04-05 TL
DecaFe1-- Blacked out V2 with partial amber diffuser
04 TL 04-- Blacked out V2
Yukoncole-- AM Colormatched V2, painted fog light cover
APNorm-- Blacked out V2, CCFL, painted fog light bulb cover, carbon fiber inlays.
06 TL
thechamp531 -- Cleared, ZKW Replica
swttl1985-- Blacked out V2, painted fog light cover
07-08 Base
Baxton -- Blacked out V2, ZKW-R
07-08 Type S
wdp415-- Blacked out V2 with CF inlays
andyc123-- Blacked out V2
#417
QUESTION FOR THOSE WITH CCFL
Did you hook it up to a relay or directly to your lights? Any regrets and wish you did it the other way? I'm still trying to decide so any help would be appreciated. Thanks!
Did you hook it up to a relay or directly to your lights? Any regrets and wish you did it the other way? I'm still trying to decide so any help would be appreciated. Thanks!
#420
Former Sponsor
Thread Starter
iTrader: (12)
Updated List
Updated List
04-05 TL
DecaFe1-- Blacked out V2 with partial amber diffuser
04 TL 04-- Blacked out V2
Yukoncole-- AM Colormatched V2, painted fog light cover
APNorm-- Blacked out V2, CCFL, painted fog light bulb cover, carbon fiber inlays.
06 TL
thechamp531 -- Cleared, ZKW Replica
AlexNYC-- Blacked out V2, Painted foglight bulb cover, CCFL, Carbon Fiber inlays, ZKW-R install
07-08 Base
hitmen4-- Blacked out V2
Baxton -- Blacked out V2, ZKW-R
07-08 Type S
wdp415-- Blacked out V2 with CF inlays
andyc123-- Blacked out V2
04-05 TL
DecaFe1-- Blacked out V2 with partial amber diffuser
04 TL 04-- Blacked out V2
Yukoncole-- AM Colormatched V2, painted fog light cover
APNorm-- Blacked out V2, CCFL, painted fog light bulb cover, carbon fiber inlays.
06 TL
thechamp531 -- Cleared, ZKW Replica
AlexNYC-- Blacked out V2, Painted foglight bulb cover, CCFL, Carbon Fiber inlays, ZKW-R install
07-08 Base
hitmen4-- Blacked out V2
Baxton -- Blacked out V2, ZKW-R
07-08 Type S
wdp415-- Blacked out V2 with CF inlays
andyc123-- Blacked out V2
#432
Race Director
iTrader: (1)
So I did this mod myself over the weekend. Wasn't hard, but def worth the $150 to send to JNC (trust me).
What I am posting about however is when I had it apart, and was about ready to put back together I had gotten some finger prints on the chrome under reflector things. So I took a microfiber to it. And what do you freaking know, the chrome started rubbing right off. So I had to take it almost completely apart and repaint it. Added probably 4 hours to my work load.
At any rate, great mod, would recommend to all.
What I am posting about however is when I had it apart, and was about ready to put back together I had gotten some finger prints on the chrome under reflector things. So I took a microfiber to it. And what do you freaking know, the chrome started rubbing right off. So I had to take it almost completely apart and repaint it. Added probably 4 hours to my work load.
At any rate, great mod, would recommend to all.
#433
I Have A Meth Lab In
JnC, sent you an Email, let me know when you're ready to do my lights, am looking forward to seeing red carbon fiber insets.
Enjoyed reading your posts to AcuraJeff. Guy is fkn annoying!!
Let me know on the lights.
Enjoyed reading your posts to AcuraJeff. Guy is fkn annoying!!
Let me know on the lights.
#434
I Have A Meth Lab In
So I did this mod myself over the weekend. Wasn't hard, but def worth the $150 to send to JNC (trust me).
What I am posting about however is when I had it apart, and was about ready to put back together I had gotten some finger prints on the chrome under reflector things. So I took a microfiber to it. And what do you freaking know, the chrome started rubbing right off. So I had to take it almost completely apart and repaint it. Added probably 4 hours to my work load.
At any rate, great mod, would recommend to all.
What I am posting about however is when I had it apart, and was about ready to put back together I had gotten some finger prints on the chrome under reflector things. So I took a microfiber to it. And what do you freaking know, the chrome started rubbing right off. So I had to take it almost completely apart and repaint it. Added probably 4 hours to my work load.
At any rate, great mod, would recommend to all.
I'm having JnC do my headlights. His pics tell the whole story in every job he does.
#435
Race Director
iTrader: (1)
Just have JNC do it, lol.
#436
Intermediate
Join Date: May 2009
Location: South Florida
Age: 44
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Got my JNC headlights, installed...look sick! Another great job jnc.
Just got my body work done, tail light film, rear side marker tint film, TLS decklid, TLS front chrome grill, rear TLS chrome Garnish...only things left are RJ wheels and to lower it! Can't wait.
Thanks again Jnc...trade in headlights will be on their way.
Will post pics soon w/ JNC headlights.
Just got my body work done, tail light film, rear side marker tint film, TLS decklid, TLS front chrome grill, rear TLS chrome Garnish...only things left are RJ wheels and to lower it! Can't wait.
Thanks again Jnc...trade in headlights will be on their way.
Will post pics soon w/ JNC headlights.
#437
Former Sponsor
Thread Starter
iTrader: (12)
Yes they are indeed very bright, here are some low exposure pictures as normal pictures show just a blob of light rather than showing the definition.
I got your text messages late last night, will try to call you today .
So I did this mod myself over the weekend. Wasn't hard, but def worth the $150 to send to JNC (trust me).
What I am posting about however is when I had it apart, and was about ready to put back together I had gotten some finger prints on the chrome under reflector things. So I took a microfiber to it. And what do you freaking know, the chrome started rubbing right off. So I had to take it almost completely apart and repaint it. Added probably 4 hours to my work load.
At any rate, great mod, would recommend to all.
What I am posting about however is when I had it apart, and was about ready to put back together I had gotten some finger prints on the chrome under reflector things. So I took a microfiber to it. And what do you freaking know, the chrome started rubbing right off. So I had to take it almost completely apart and repaint it. Added probably 4 hours to my work load.
At any rate, great mod, would recommend to all.
I did get your PM as well and at the moment the only spare I might have is a pair of blacked out strips.
Got my JNC headlights, installed...look sick! Another great job jnc.
Just got my body work done, tail light film, rear side marker tint film, TLS decklid, TLS front chrome grill, rear TLS chrome Garnish...only things left are RJ wheels and to lower it! Can't wait.
Thanks again Jnc...trade in headlights will be on their way.
Will post pics soon w/ JNC headlights.
Just got my body work done, tail light film, rear side marker tint film, TLS decklid, TLS front chrome grill, rear TLS chrome Garnish...only things left are RJ wheels and to lower it! Can't wait.
Thanks again Jnc...trade in headlights will be on their way.
Will post pics soon w/ JNC headlights.
Damn, you going all out I see