Carbon Fiber Engine Shrouds
#44
I will let you know as soon as I verify.....working on it! Thanks for your interest too! This is still being developed and should be complete soon and you can find details here as they develop out. Then we will have to get some formalities taken care of at the same time which you will see develop out here too. Just keep a watch here on this thread!
#45
Ryan Christopher
Originally Posted by MichaelBenz
I will let you know as soon as I verify.....working on it! Thanks for your interest too! This is still being developed and should be complete soon and you can find details here as they develop out. Then we will have to get some formalities taken care of at the same time which you will see develop out here too. Just keep a watch here on this thread!
Thank you for the update!
#46
got an update....things are working out just great...this is going to happen for sure....I have met with the carbon fiber people today and they will begin production on the first runs tonight if everything goes well. They will be available in Black first...followed by Red if people want red carbon fiber or blue carbon fiber...but these will be made on a special order basis as we have more black CF materials available and I dont want boatloads of colors left nor extra covers. I need to test fit the first one and run with it for a bit to make sure it is all good and proper.....then we will release product for general public. Keep in tune and I should have a final cost posted within a short period...again...still looking at the $250 - $260 range! Nothing has caused it to increase...which is a good thing! Also...if you think you would want one of the colors....shout out here too so I can kind of preplan now!
Contacting Soopa now for details of what I need to do to keep everything proper here too.
Contacting Soopa now for details of what I need to do to keep everything proper here too.
#51
Advanced
Join Date: Oct 2005
Location: Winnipeg, Canada
Age: 40
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
I think the red would look hot with the NBP. Just outta curiousity whats the upside or downside to these? Purely for looks is what i am assuming, but do they weigh more than the factory covers? Maybe dumb question but i dont know
#52
Originally Posted by Tufferson
I think the red would look hot with the NBP. Just outta curiousity whats the upside or downside to these? Purely for looks is what i am assuming, but do they weigh more than the factory covers? Maybe dumb question but i dont know
#54
Originally Posted by ITL
What's the latest? Have you had any conversation with him regarding this potential product?
I think red/black weave would look really good on my NBP
I think red/black weave would look really good on my NBP
#57
I do my own work.
Join Date: Jul 2004
Location: ATL
Age: 43
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MichaelBenz
Yes...be patient. It is forthcoming. Should be available within a short time. I have a guy working on it now. BTW...did you read the page 2 at all? This was only 2 days ago dude?
#58
Originally Posted by ITL
Sorry, bro. I thought I had been following this thing, but somehow missed post #46, which has all the latest details. Thanks for your work on this project!
There is gonna be black CF ones first...then red....followed by blue if anybody wants that, given I get the details worked out with the admins here on AZ. Working on that now also.
#62
You can email me at mbenz@insightbb.com if you wish to have pics of the prototype emailed to you or need additional information....it should be here within a few days. Michael
If you are wanting red or blue color....let me know too. I know of one red so far....all others black.
If you are wanting red or blue color....let me know too. I know of one red so far....all others black.
#67
Team Anthracite Member
Just a question... when installing the supercharger, do you have to modify the engine cover at all? Just wondering in case this might affect some people who will add the S/C after buying the CF cover.
#68
321 whp SAE
Join Date: Jul 2004
Location: Matawan, NJ
Age: 45
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zax123
Just a question... when installing the supercharger, do you have to modify the engine cover at all? Just wondering in case this might affect some people who will add the S/C after buying the CF cover.
#69
Tint The Windshield
1st Roster List Of Interestd People !
With this many people interested (and I'm sure more have to jump on once we post a thread in the group buy section) we have to get a pretty low a$$ price for a group buy!!!
MichaelBenz I sent you an email from my AOL screen name. Please send pictures. Thanks.
Interested People:
1. MichaelBenz
2. ludachrisvt
3. SonnySoMoney
4. TL-CrAzIe-05
5. Meek32v6
6. TL-Rocks!
7. flvol77
8. dragonlord
9. hndaracer159
10. Spiritman
11. havokgroup
12. Tufferson
13. madehtsobi
14. RJANACONDA
15. dan.....k
16. blktl1
17. lembowski
18. Black_05_TL_6SP
19. AcuraVic
20. invincible569
21. TLdriver022
22. ITL
23. Weekendzs
24. techdiver_monkey
25. Silver Bullet
26. TL-CrAzIe-05
27. trancemission
28. DeadLock
29. xtin
30. CAHobbs
31. NGNOUS
32. Laxplaya11385
33. AcurasGhost
MichaelBenz I sent you an email from my AOL screen name. Please send pictures. Thanks.
Interested People:
1. MichaelBenz
2. ludachrisvt
3. SonnySoMoney
4. TL-CrAzIe-05
5. Meek32v6
6. TL-Rocks!
7. flvol77
8. dragonlord
9. hndaracer159
10. Spiritman
11. havokgroup
12. Tufferson
13. madehtsobi
14. RJANACONDA
15. dan.....k
16. blktl1
17. lembowski
18. Black_05_TL_6SP
19. AcuraVic
20. invincible569
21. TLdriver022
22. ITL
23. Weekendzs
24. techdiver_monkey
25. Silver Bullet
26. TL-CrAzIe-05
27. trancemission
28. DeadLock
29. xtin
30. CAHobbs
31. NGNOUS
32. Laxplaya11385
33. AcurasGhost
#70
Originally Posted by AcurasGhost
With this many people interested (and I'm sure more have to jump on once we post a thread in the group buy section) we have to get a pretty low a$$ price for a group buy!!!
MichaelBenz I sent you an email from my AOL screen name. Please send pictures. Thanks.
Interested People:
1. MichaelBenz
2. ludachrisvt
3. SonnySoMoney
4. TL-CrAzIe-05
5. Meek32v6
6. TL-Rocks!
7. flvol77
8. dragonlord
9. hndaracer159
10. Spiritman
11. havokgroup
12. Tufferson
13. madehtsobi
14. RJANACONDA
15. dan.....k
16. blktl1
17. lembowski
18. Black_05_TL_6SP
19. AcuraVic
20. invincible569
21. TLdriver022
22. ITL
23. Weekendzs
24. techdiver_monkey
25. Silver Bullet
26. TL-CrAzIe-05
27. trancemission
28. DeadLock
29. xtin
30. CAHobbs
31. NGNOUS
32. Laxplaya11385
33. AcurasGhost
MichaelBenz I sent you an email from my AOL screen name. Please send pictures. Thanks.
Interested People:
1. MichaelBenz
2. ludachrisvt
3. SonnySoMoney
4. TL-CrAzIe-05
5. Meek32v6
6. TL-Rocks!
7. flvol77
8. dragonlord
9. hndaracer159
10. Spiritman
11. havokgroup
12. Tufferson
13. madehtsobi
14. RJANACONDA
15. dan.....k
16. blktl1
17. lembowski
18. Black_05_TL_6SP
19. AcuraVic
20. invincible569
21. TLdriver022
22. ITL
23. Weekendzs
24. techdiver_monkey
25. Silver Bullet
26. TL-CrAzIe-05
27. trancemission
28. DeadLock
29. xtin
30. CAHobbs
31. NGNOUS
32. Laxplaya11385
33. AcurasGhost
#72
Iro Ridg .308
Originally Posted by MichaelBenz
Ah...no question is a dumb question! As far as weight goes...that would remain to be seen but I would expect them to be about the same to a shade lighter....either way it is a negligible weight factor (OEM plastic or carbon fiber) involved....in fact...it is more a looks thing cause the carbon fiber gives it a nice finished look!
For example, on my sportbike, I had put on an aftermarket carbon fiber exhaust can. So not only did I shave some weight (compared to the oem steel cans) but I also didn't have to worry about any of my lady passengers or myself hitting the exhaust by accident then burn ourselves since CF does not conduct heat well. So in this application, it was good to have CF.
OTOH, like another member mentioned (I believe hondata), to help keep manifold temps low we should keep our engine covers off. This CF piece would essentially keep the engine hot since the heat will not transfer to the CF.
So basically, unless you plan on purchasing the thermoblock spacers and/or the hondata spacer (once it is released), it isn't a wise purchase unless your only into dressing up your engine bay IMO.
#73
Originally Posted by special-ed
Most importantly, CF isn't used not only for it's reduction in weight, but for it's resistance to heat which may or maybe a good thing to use it as an engine cover.
For example, on my sportbike, I had put on an aftermarket carbon fiber exhaust can. So not only did I shave some weight (compared to the oem steel cans) but I also didn't have to worry about any of my lady passengers or myself hitting the exhaust by accident then burn ourselves since CF does not conduct heat well. So in this application, it was good to have CF.
OTOH, like another member mentioned (I believe hondata), to help keep manifold temps low we should keep our engine covers off. This CF piece would essentially keep the engine hot since the heat will not transfer to the CF.
So basically, unless you plan on purchasing the thermoblock spacers and/or the hondata spacer (once it is released), it isn't a wise purchase unless your only into dressing up your engine bay IMO.
For example, on my sportbike, I had put on an aftermarket carbon fiber exhaust can. So not only did I shave some weight (compared to the oem steel cans) but I also didn't have to worry about any of my lady passengers or myself hitting the exhaust by accident then burn ourselves since CF does not conduct heat well. So in this application, it was good to have CF.
OTOH, like another member mentioned (I believe hondata), to help keep manifold temps low we should keep our engine covers off. This CF piece would essentially keep the engine hot since the heat will not transfer to the CF.
So basically, unless you plan on purchasing the thermoblock spacers and/or the hondata spacer (once it is released), it isn't a wise purchase unless your only into dressing up your engine bay IMO.
You are right though, this is an eyecandy thing.....I think most people understand this....its not like the negligible weight loss with this part is going to make HP or increase your times by any means! Its just looks nice as hell! Thats all! Not to mention if you show your car....it gets you good points as it gives it that custom look everybody is going for! Trust me...this is a good thing man!
Bottom line...its in the works guys....just hang in there and thanks for your continued interest! Again...a group buy will be initiated at the time of release so all the first comers will get a discounted price! This has been a long time in the works and it will come through for us! Again...thanks for your continued interest and support!!
#75
Fantasitic!......as long as no question is a dumb one....
Why in the world would you want to spend money for no additional performance? Under hood temps will be the same. I am taking my engine covers off.
Apparently this thread in the "performance area" isn't really about performance at all? Perhaps this should be under a "bling" part of the site.
Off to question the high flow cats......
-Lee
ps. Please take extra time to check my grammar and spelling.
Why in the world would you want to spend money for no additional performance? Under hood temps will be the same. I am taking my engine covers off.
Apparently this thread in the "performance area" isn't really about performance at all? Perhaps this should be under a "bling" part of the site.
Off to question the high flow cats......
-Lee
ps. Please take extra time to check my grammar and spelling.
Originally Posted by MichaelBenz
Ah...no question is a dumb question! As far as weight goes...that would remain to be seen but I would expect them to be about the same to a shade lighter....either way it is a negligible weight factor (OEM plastic or carbon fiber) involved....in fact...it is more a looks thing cause the carbon fiber gives it a nice finished look!
#76
Originally Posted by asu_lee
Fantasitic!......as long as no question is a dumb one....
Why in the world would you want to spend money for no additional performance? Under hood temps will be the same. I am taking my engine covers off.
Apparently this thread in the "performance area" isn't really about performance at all? Perhaps this should be under a "bling" part of the site.
Off to question the high flow cats......
-Lee
ps. Please take extra time to check my grammar and spelling.
Why in the world would you want to spend money for no additional performance? Under hood temps will be the same. I am taking my engine covers off.
Apparently this thread in the "performance area" isn't really about performance at all? Perhaps this should be under a "bling" part of the site.
Off to question the high flow cats......
-Lee
ps. Please take extra time to check my grammar and spelling.
#77
Tint The Windshield
Originally Posted by MichaelBenz
Thanks...I know I am interested guy> I am having them made now and they are in production. I have a deal setup for Vendor status here now with Astroboy that as soon as I can ship these babies out...you will be the first to know and yes....a group buy will be iniated with special pricing for the first comers. As far as a "low ass price"....you dont want that when it comes to CF parts (trust me).....I mean you want fair....but not cheap....cause thats when corners start being cut for profit, ect. Last I heard...still on track price-wise with no increases expected as the first one has been made already....I just have to get over there and test fit it and run with it for a while to make sure there are no unforseen rattles or vibrations or anything. I will snap some pics and get em up here for you guys to see.
#78
Originally Posted by MichaelBenz
Ah....I believe the section is PARTS and performance dude. Sorry to offend you...but not everything in this section is all performance. Thanks for your input. BTW....who pissed in your wheaties this morning man?
OK, as long as I'm in the thread and have it open, I might as well move it.
#80
FOR SALE - BM
Join Date: Nov 2005
Location: Philadelphia, PA
Age: 46
Posts: 1,503
Likes: 0
Received 0 Likes
on
0 Posts
<------ count me in... mike if possible, could you please sent pics to dmilillo@rcn.com