3G TL (2004-2008)
Sponsored by:
Sponsored by:

AEM CAI now available...

Thread Tools
 
Search this Thread
 
Old 02-16-2005, 03:05 PM
  #1  
Advanced
Thread Starter
 
mrbrett's Avatar
 
Join Date: Oct 2004
Location: SoCal CA
Age: 45
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Exclamation AEM CAI now available...

According to the AEM website, 04 TL intakes are available now!! Anyone plan on purchasing one, or has anyone purchased one?
Old 02-16-2005, 03:15 PM
  #2  
tehLEGOman
 
ACCURATEin's Avatar
 
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,172
Received 1,983 Likes on 1,336 Posts
I already have the injen RD CAI. I might purchase the AEM just to see if there is a difference.
Old 02-16-2005, 05:40 PM
  #3  
Cruisin'
 
tim1217's Avatar
 
Join Date: Apr 2004
Location: Chicago area
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
They just released it yesterday. I purchased one online from autocarparts.com and it is being shipped at the end of the week.

Here's a link to the site I purchased from (pretty good price).

http://www.autocarparts.com/part/39/1
Old 02-16-2005, 06:49 PM
  #4  
Advanced
Thread Starter
 
mrbrett's Avatar
 
Join Date: Oct 2004
Location: SoCal CA
Age: 45
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by tim1217
They just released it yesterday. I purchased one online from autocarparts.com and it is being shipped at the end of the week.

Here's a link to the site I purchased from (pretty good price).

http://www.autocarparts.com/part/39/1
There is a store on Ebay thats selling them for 190.00...

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WD1V

The store has like 8500 positives, so it should be safe. I will probably purchase one from there...
Old 02-16-2005, 07:01 PM
  #5  
Senior Moderator
 
cM3go's Avatar
 
Join Date: Mar 2003
Location: IL
Posts: 15,295
Received 131 Likes on 79 Posts
I still want dyno numbers
Old 02-16-2005, 08:27 PM
  #6  
AZ O.G NoOldManVetteOwner
 
2K2SilverTL-S's Avatar
 
Join Date: Mar 2001
Location: NJ/NYC
Posts: 2,074
Received 204 Likes on 126 Posts
Originally Posted by ACCURATEin
I already have the injen RD CAI. I might purchase the AEM just to see if there is a difference.
You will be wasting your money. They're essentially the same product.
Old 02-17-2005, 12:26 AM
  #7  
Registered VTEC junkie
 
jchcmax's Avatar
 
Join Date: Dec 2004
Location: Anaheim, California
Posts: 332
Likes: 0
Received 6 Likes on 6 Posts
Originally Posted by cTLgo
I still want dyno numbers
Hey , scroll down the page & check out the graph next to our model number 21-513, the cold air. It has a dyno chart=

http://www.aempower.com/product_list_app.asp

Wht do you think about that? 19 horses increase??
Old 02-17-2005, 12:31 AM
  #8  
One on the right for me
 
subinf's Avatar
 
Join Date: Jul 2004
Location: Bay Area, CA
Age: 41
Posts: 27,913
Received 271 Likes on 173 Posts
I am still trying to figure out how the AEM intake gives 19 horses while injen and k&n managed only around 10. Just adding an intake adds 19 to the TL...which already has a decent cold air intake to begin with? I dont buy that...I think there might be more behind that dyno chart than we know.
Old 02-17-2005, 01:19 AM
  #9  
Silky Smooth
 
Lokius's Avatar
 
Join Date: Mar 2004
Location: San Diego, CA
Age: 38
Posts: 1,272
Likes: 0
Received 5 Likes on 5 Posts
I'm getting one, I have always preferred AEM over injen and others, and even if i dont get 19hp, I will be happy with it..
Old 02-17-2005, 06:15 AM
  #10  
Burning Brakes
 
ericajackhannahjamie?'s Avatar
 
Join Date: Oct 2004
Location: leave of absence
Age: 43
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
I've always liked the AEM CAI, I had one in my 2002 accord coupe and I am strongly thinking about perchasing one... but it's really a toss up between AEM and COMPTECH ICEBOX... does anyone have any opinion which 1 is better of the 2?


AEM CAI vs COMPTECH ICEBOX..??
Old 02-17-2005, 06:56 AM
  #11  
Pro
 
GoBig's Avatar
 
Join Date: Oct 2003
Location: El Segundo, CA
Age: 56
Posts: 706
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by cTLgo
I still want dyno numbers
ME TOO!
Old 02-17-2005, 10:22 AM
  #12  
Burning Brakes
 
ericajackhannahjamie?'s Avatar
 
Join Date: Oct 2004
Location: leave of absence
Age: 43
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
Has anyone placed an order yet? If you go under their company site, and they don't even have an 800 number to contact... only email...
Old 02-17-2005, 11:44 AM
  #13  
Instructor
 
SparkAF's Avatar
 
Join Date: Feb 2004
Location: Niceville FL
Age: 66
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
I'm just going to wait and see what people are saying about the intake, before I make a decision whether to swap out my INJEN.
Old 02-17-2005, 12:05 PM
  #14  
Advanced
 
mporter410's Avatar
 
Join Date: Sep 2004
Location: Woodbridge, Virginia
Age: 55
Posts: 80
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by subinf
I am still trying to figure out how the AEM intake gives 19 horses while injen and k&n managed only around 10. Just adding an intake adds 19 to the TL...which already has a decent cold air intake to begin with? I dont buy that...I think there might be more behind that dyno chart than we know.
Old 02-17-2005, 12:16 PM
  #15  
Burning Brakes
 
ericajackhannahjamie?'s Avatar
 
Join Date: Oct 2004
Location: leave of absence
Age: 43
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
Jeremy,

::AEM latest news::
I just exhanged an email with http://www.importperformance.com/store/21-513
and this is what they wrote back...

"We are expecting for AEM to release the stats info, when they release the intake
Which is suppose to be anyday.. If you have any other questions, feel free to email me. Best Regards, Tim Piscitelli www.autocarparts.com"
and if you check the website, the AEM is still NOT AVAILABLE YET...

anyday could mean next month.... so to me, if AEM comes out before COMPTECH ICEBOX, then I'll buy it, otherwise, I'll get it from COMPTECH.
Old 02-17-2005, 12:54 PM
  #16  
Banned
 
car_lost's Avatar
 
Join Date: Aug 2002
Location: Miami, FL
Age: 40
Posts: 5,045
Likes: 0
Received 0 Likes on 0 Posts
AEM sucks... do a search for 'aem sucks' and you will see why.

go with injen or comptech (if it ever comes out).
Old 02-17-2005, 02:48 PM
  #17  
Does anyone read this
 
Donte99TL's Avatar
 
Join Date: Dec 2000
Location: Peace
Age: 52
Posts: 2,589
Likes: 0
Received 2 Likes on 1 Post
For people with the injen CAI could you tell a difference in performance when you installed it?
Old 02-17-2005, 05:39 PM
  #18  
Advanced
Thread Starter
 
mrbrett's Avatar
 
Join Date: Oct 2004
Location: SoCal CA
Age: 45
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ACCURATEin
I already have the injen RD CAI. I might purchase the AEM just to see if there is a difference.
With your Injen, is there a difference in sound? If so, what does it sound like?
Old 02-17-2005, 06:54 PM
  #19  
Senior Moderator
 
cM3go's Avatar
 
Join Date: Mar 2003
Location: IL
Posts: 15,295
Received 131 Likes on 79 Posts
Originally Posted by jchcmax
Hey , scroll down the page & check out the graph next to our model number 21-513, the cold air. It has a dyno chart=

http://www.aempower.com/product_list_app.asp

Wht do you think about that? 19 horses increase??

Thats what I mean, I want a real dyno of someone who got the AEM CAI
Old 02-17-2005, 08:52 PM
  #20  
05 WDP TL
 
madehtsobi's Avatar
 
Join Date: Jan 2005
Age: 46
Posts: 473
Likes: 0
Received 0 Likes on 0 Posts
aem is just the cold air correct?

not the v2 version they have? do you guys think that is just some advertising scam??

=\
Old 02-17-2005, 08:57 PM
  #21  
Suzuka Master
 
crazymjb's Avatar
 
Join Date: Jan 2005
Age: 34
Posts: 7,438
Likes: 0
Received 1 Like on 1 Post
That Dyno info better be at the wheels!! I heard stock the TL barely throughs down 200 ath the wheels. If someone would like to volunteer to test and dyno this I would be much more likely to get it. Does it void the warrenty?
Old 02-17-2005, 09:01 PM
  #22  
.:KCCO:.
 
ayethetiense's Avatar
 
Join Date: Sep 2004
Location: Irvine
Age: 42
Posts: 2,174
Received 4 Likes on 3 Posts
ok... first off... 19 is a lot... but to the wheels... thats insane....

think about it.

have you guys looked at the stock intake? its not that restrictive
Old 02-17-2005, 09:08 PM
  #23  
Intermediate
 
EnigmaofTL's Avatar
 
Join Date: Feb 2005
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
How loud is it? I would want one, but not if it's very loud.
Old 02-17-2005, 09:10 PM
  #24  
Intermediate
 
EnigmaofTL's Avatar
 
Join Date: Feb 2005
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by crazymjb
That Dyno info better be at the wheels!! I heard stock the TL barely throughs down 200 ath the wheels. If someone would like to volunteer to test and dyno this I would be much more likely to get it. Does it void the warrenty?

Uh, you heard wrong! Most dynoes I've seen were around 230 whp, which is right at the 15% mark of drivetrain loss.
Old 02-17-2005, 09:18 PM
  #25  
One on the right for me
 
subinf's Avatar
 
Join Date: Jul 2004
Location: Bay Area, CA
Age: 41
Posts: 27,913
Received 271 Likes on 173 Posts
There have been some threads in the past regarding the 'growl/whistle' of the cold air intakes. both injen and k&n users have complained/noticed this noise.. i have the k&n intake and if the windows are up its not too bad, but most of the time while on the throttle (exception being full throttle) the sound is kinda stupid. maybe the aem will be better, probably not. i am looking for a dyno to use to do both before and after gains with my magnaflow exhaust and with and without my cold air k&n intake. hopefully this will happen sooner than later.
Old 02-17-2005, 10:26 PM
  #26  
Burning Brakes
 
ericajackhannahjamie?'s Avatar
 
Join Date: Oct 2004
Location: leave of absence
Age: 43
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by car_lost
AEM sucks... do a search for 'aem sucks' and you will see why.

go with injen or comptech (if it ever comes out).
AEM CAI does not "Suck", I've had it in my 2002 Accord and it worked like a charm. NO whistle noise but rather quite loud (the way I like it ... however, the thread originator mentioned the AEM is out, but it's actually not... I am not a fan of INJEN (nothing wrong with them), a buddy of mine installed a CAI in his corolla S.. it sounded like crap.. maybe it's the car itself... I figure... if whoever comes out with their CAI first between AEM and COMPTECH, i'll it..
I just ordered COMPTECH CATBACK EXHAUST, sports spring, and rear sway bar today.. pretty excited for this project... getting my car ready for the spring
Old 02-17-2005, 10:44 PM
  #27  
Suzuka Master
 
crazymjb's Avatar
 
Join Date: Jan 2005
Age: 34
Posts: 7,438
Likes: 0
Received 1 Like on 1 Post
That 230 at the wheels with 5at or 6m?
Old 02-17-2005, 11:09 PM
  #28  
AZ O.G NoOldManVetteOwner
 
2K2SilverTL-S's Avatar
 
Join Date: Mar 2001
Location: NJ/NYC
Posts: 2,074
Received 204 Likes on 126 Posts
My TL-S sounds like a MONSTER when I hit VTEC w/ the AEM CAI. It does not sound like a ricey 4-cylinder w/ an intake. It is just a mean, raw sound that will scare any bystandards near you. I personally think its awesome, and I definitely felt power increases on the low and high end. It does, however, have a whisle at ideal that is louder when you first start the car (esp in the cold). I highly recomend the AEM CAI, but I'm going to keep my 04 TL as the tame TL and not get it.
Old 02-18-2005, 06:10 AM
  #29  
Burning Brakes
 
ericajackhannahjamie?'s Avatar
 
Join Date: Oct 2004
Location: leave of absence
Age: 43
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
Latest news, AEM has a dyno chart
http://www.aempower.com/pdf/dyno/21-...Acura%20TL.pdf
based on the past experience, I would have to agree with 2kTL that the AEM CAI does have a MONSTER sound when hit the gas pedal...

Old 02-18-2005, 06:20 AM
  #30  
Burning Brakes
 
ericajackhannahjamie?'s Avatar
 
Join Date: Oct 2004
Location: leave of absence
Age: 43
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
also,
has anyone ordered from this company? http://www.autocarparts.com/part/39/1 , they list their price at $217... when AEM company list theirs at $307http://www.aempower.com/product_intake_app.asp ... (mind you that this is a NEW product)

so... do you trust autocarparts??
Old 02-18-2005, 09:17 AM
  #31  
Advanced
 
anitosi's Avatar
 
Join Date: Apr 2004
Location: seattle, wa
Posts: 91
Likes: 0
Received 0 Likes on 0 Posts
Wink

anyone have it..?
need dyno for sure? and then we can debate!!..
i used to asked this same question but is long time ago...last year i believe.
04 summer i call them and they said they will release in about a month not a year....heuhee when i ask "CARNUTZ"...it wont be that much..could be close but not 19.6.. damm..it's almost 20 hp...
Old 02-18-2005, 11:14 AM
  #32  
Racer
 
TheOne305's Avatar
 
Join Date: May 2004
Location: Tacoma
Age: 47
Posts: 252
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ayethetiense
ok... first off... 19 is a lot... but to the wheels... thats insane....

think about it.

have you guys looked at the stock intake? its not that restrictive
RSXS are getting 18whp with v2 and thats a 2.0L.So 19whp from a 3.2L 270hp.I believe it.
Old 02-21-2005, 08:56 AM
  #33  
Burning Brakes
 
ericajackhannahjamie?'s Avatar
 
Join Date: Oct 2004
Location: leave of absence
Age: 43
Posts: 1,018
Likes: 0
Received 0 Likes on 0 Posts
Ordered mine on friday, should be here by early March.. .will get a dyno and let you guys know.
Old 02-26-2005, 08:21 AM
  #34  
Pro
 
GoBig's Avatar
 
Join Date: Oct 2003
Location: El Segundo, CA
Age: 56
Posts: 706
Likes: 0
Received 0 Likes on 0 Posts
Anyone Dyno Yet?
Old 03-03-2005, 11:00 PM
  #35  
7th Gear
 
pimplayahustla's Avatar
 
Join Date: Mar 2005
Age: 49
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
AEM Rules

I just traded my RSX S for a 2005 TL 6 speed A-spec aero kit and rear decklid...

My RSX finished with 206.7whp with 150lb ft tq and ran 14.015 in Arizona heat. Stock the car put down 167whp and I added an AEM CAS and it immediately made 185whp. The additional power adders I have were Comptech 4-1 race header and Hondata #4 flash program with DC Sports TCS exhaust.

I have had an AEM on my last three cars which were the RSX, 2001 Prelude SH, 99 Civic Si. It always performed as advertised and sounded great. No question!

If you want any points for reference please check clubrsxcom and search my name for dyno charts.

I purchased my AEM for the TL 2 weeks ago from autocarparts.com and they initially sent me the CAI for 96-00 Civic DX but I emailed Tim and he had me a new one sent out which just arrived today 3/3 - I will dyno my car this Saturday at Streetflight.com and then I will put the intake on and re-dyno to provide you all with absolute results. If someone beats me to it that is fine but I will do my part to help you guys get the knowledge you desire. I'm betting this intake will outperform everything on the market and if Hondata comes out with a program you will see 300whp with just CAI, headers and computer upgrade.

As a background I have raced Hondas for over 8 years - I do not plan on racing the TL - maybe I will make a pass or 20 but not over do it.

I previously held #2 spot in 2003 for fastest ALL-Motor RSX S in the U.S. - this was with just bolt ons and ecu upgrade - no race header at that time.
Old 03-03-2005, 11:04 PM
  #36  
7th Gear
 
pimplayahustla's Avatar
 
Join Date: Mar 2005
Age: 49
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by pimplayahustla
I just traded my RSX S for a 2005 TL 6 speed A-spec aero kit and rear decklid...

My RSX finished with 206.7whp with 150lb ft tq and ran 14.015 in Arizona heat. Stock the car put down 167whp and I added an AEM CAS and it immediately made 185whp. The additional power adders I have were Comptech 4-1 race header and Hondata #4 flash program with DC Sports TCS exhaust.

I have had an AEM on my last three cars which were the RSX, 2001 Prelude SH, 99 Civic Si. It always performed as advertised and sounded great. No question!

If you want any points for reference please check clubrsxcom and search my name for dyno charts.

I purchased my AEM for the TL 2 weeks ago from autocarparts.com and they initially sent me the CAI for 96-00 Civic DX but I emailed Tim and he had me a new one sent out which just arrived today 3/3 - I will dyno my car this Saturday at Streetflight.com and then I will put the intake on and re-dyno to provide you all with absolute results. If someone beats me to it that is fine but I will do my part to help you guys get the knowledge you desire. I'm betting this intake will outperform everything on the market and if Hondata comes out with a program you will see 300whp with just CAI, headers and computer upgrade.

As a background I have raced Hondas for over 8 years - I do not plan on racing the TL - maybe I will make a pass or 20 but not over do it.

I previously held #2 spot in 2003 for fastest ALL-Motor RSX S in the U.S. - this was with just bolt ons and ecu upgrade - no race header at that time.
Dyno time set for Saturday 3/5
Old 03-03-2005, 11:06 PM
  #37  
7th Gear
 
pimplayahustla's Avatar
 
Join Date: Mar 2005
Age: 49
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by pimplayahustla
Dyno time set for Saturday 3/5
I forgot - I'm new. Nice site - just wanted to say that
Old 03-03-2005, 11:42 PM
  #38  
Instructor
 
t-dogg's Avatar
 
Join Date: Feb 2005
Location: LA
Age: 38
Posts: 161
Likes: 0
Received 0 Likes on 0 Posts
pimplayahustla, you are the man.
Old 03-04-2005, 11:09 AM
  #39  
7th Gear
 
pimplayahustla's Avatar
 
Join Date: Mar 2005
Age: 49
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by t-dogg
pimplayahustla, you are the man.
t-dogg - since you are being sarcastic you are an idiot - thanks for getting me started.
Old 03-04-2005, 09:36 PM
  #40  
'06 750Li Sapphire/Creme
 
ndabunka's Avatar
 
Join Date: Dec 2003
Location: Charlotte, NC
Age: 61
Posts: 2,012
Likes: 0
Received 0 Likes on 0 Posts
Pimpplaya - Many here are aware that I have been skeptical of the AEM's claims. I WANT them to be true but since the unit has experienced SO many delays, I've become ummm, jaded. Thanks for doing the leg work and providing this forum with your results. Sounds like you have better access to a dyno than most of us for before and after results. I take my hat off to you and look forward to the results. PS - Please post them even if they don't show huge gains. We would all still be interested. BTW - Does the dyno shop you use have some way of generating the wind effects at speed (i.e. a big arse fan)?


Quick Reply: AEM CAI now available...



All times are GMT -5. The time now is 07:24 AM.