6 piston bbk installed
#1
6 piston bbk installed
The wait is finally over got my kit installed.
Specs:
14 inch rotors
2 piece floating rotors
6 piston calipers
Stainless steel braided lines
Any questions Contact me via Email or instagram @subzero_cv2 / eddie.jc15@gmail.com
Specs:
14 inch rotors
2 piece floating rotors
6 piston calipers
Stainless steel braided lines
Any questions Contact me via Email or instagram @subzero_cv2 / eddie.jc15@gmail.com
The following 3 users liked this post by subzero_cv2:
The following 2 users liked this post by Type X:
bluntman72 (02-26-2022),
EFR (02-25-2022)
#4
Surely looks nice. Looks like the kit clear the stock wheels, is that right? How is the brake bias? Would the front be too sensitive?
#5
Instructor
Their site states a 5mm spacer is required if using the factory wheels. I too am very curious if overall piston displacement was measured between factory and these, as it's the main factor affecting bias changes. I'm also curious if the calipers are Brembo, Akebono, Advics etc. to know if different pads will be readily available depending on need.
#6
Anyone have a link for the wilwood kit? My google skills have failed me as I can't seem to find it anywhere. I had their kit 20 years ago in my RSX days.
Trending Topics
#8
Burning Brakes
Also, I recall RS1 Concepts being touted here as well, although no calipers I think. I assume there are several brake kit folks out there for the G3 RDX but after having my squealing original pads and rotors replaced under the TSB, and quickly restarted squealing, it won't be Acura brake components going back on there in the near future....
#12
Do you remember what the price of that kit was? Just for comparison purposes. Can't find it on their website anymore because its all wonky. I emailed them yesterday about parts available and he didn't mention even having that kit anymore. I think it was a limited run to begin with.
#13
Instructor
Do you remember what the price of that kit was? Just for comparison purposes. Can't find it on their website anymore because its all wonky. I emailed them yesterday about parts available and he didn't mention even having that kit anymore. I think it was a limited run to begin with.
https://www.grahamrahalperformance.c...arts--products
#14
The GRP kit is $3995 and is listed on this page:
https://www.grahamrahalperformance.c...arts--products
https://www.grahamrahalperformance.c...arts--products
#15
OG
grp is double the price and requires spacers
the axion fastbrakes/wilwood doesnt
i contacted girodisc for a rotor set but its minimum 10 set buy in to produce them
(which is what grp did for theirs n why price is nuts lol)
Last edited by Type X; 03-03-2022 at 11:24 AM.
Thread
Thread Starter
Forum
Replies
Last Post
bforbrian
3G TL Performance Parts & Modifications
15
02-13-2012 08:11 PM
Motohip
1G CL Tires, Wheels, & Suspension
36
03-08-2006 01:14 PM