Kait's Build Thread
#361
Racer
Thread Starter
I will 100% definitely be there on Tuesday unless there is torrential downpour.
I will be to both. Yes, you can help with the HIDs lol
I will be to both. Yes, you can help with the HIDs lol
#362
sounds good, are you tryin to make me crawl under a lowered car though?? hahaha i wanted to kill moaarlow enough for his drop on S techs, how low did you go
#364
Racer
Thread Starter
Haha -- I am only lowered an inch, no worries.
I will try to go lower once I get this camber kit installed. I don't k now if I can go much lower without a roll though
I will try to go lower once I get this camber kit installed. I don't k now if I can go much lower without a roll though
#365
7# werC 2uoYeeS
iTrader: (1)
i was able to install my hid fogs without taking off the bumper last week. it's sort of tight but i was able to reach in easily after taking off 3 bitch clips then flipping the flap out. it was harder to find a spot to mount the ballast. i still want to learn how to take off the bumper though. i must observe dave at work one day.
#368
7# werC 2uoYeeS
iTrader: (1)
not really worried but i figured i'd try to do the hid fogs without taking off bumper if possible and it was. it wasn't even too bad for me. just 3 bitch clips and that's it. i think eventually i'll try to take off the bumper but i see no reason to yet since i have nothing that needs to be done down there. i tried going through the wheel well on the drivers side and the fucking resonator and all that shit is there. wtf!
#369
not really worried but i figured i'd try to do the hid fogs without taking off bumper if possible and it was. it wasn't even too bad for me. just 3 bitch clips and that's it. i think eventually i'll try to take off the bumper but i see no reason to yet since i have nothing that needs to be done down there. i tried going through the wheel well on the drivers side and the fucking resonator and all that shit is there. wtf!
The following users liked this post:
rockstar143 (06-08-2012)
#371
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Nice shot!...most of the best pics of my car weren't taken by me, embarrassingly enough.
Kait...the rear looks like it'll camber in and clear fender if you went lower, the front, looks pretty close...you'll see on the front though, if it's like the 3G it's not so much a roll as it is needing to hammer the front tab where the metal transitions to hold up the bumper...that's the tire gouger.
J.
Kait...the rear looks like it'll camber in and clear fender if you went lower, the front, looks pretty close...you'll see on the front though, if it's like the 3G it's not so much a roll as it is needing to hammer the front tab where the metal transitions to hold up the bumper...that's the tire gouger.
J.
The following users liked this post:
07tl-s6spd (06-08-2012)
The following users liked this post:
07tl-s6spd (06-08-2012)
#374
Chapter Leader (Central New Jersey)
iTrader: (1)
Yes sir i did. I'm still learning but i have taken some pretty good pics. Once again thanks!!
:edit: I have been thinking about starting a Photo thread of pics i have taken in the 3G TL section. I just might one of these days
:edit: I have been thinking about starting a Photo thread of pics i have taken in the 3G TL section. I just might one of these days
Last edited by 07tl-s6spd; 06-08-2012 at 09:18 PM.
#376
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
the 2 pix which Rockstar pointed out are just awesome !!!
#378
#380
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
we RUN this shit !!!
#381
Intermediate
The following users liked this post:
07tl-s6spd (06-15-2012)
#382
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ from the looks of it, seems like she is ~1-1.25 inches from maxing them Teins out....
#385
#388
Racer
Thread Starter
Haha. Sorry! Dude. I was moving. And I fell down the stairs. And was immobile. Then, we got our puppy. Finally i am getting back to real life.
Thank you for the compliments.
Dave -- lmao. After I fell down the stairs, while I was driving to the new house, my fender liner came off. Completely melted. Shoved it back in though. Dont know how my fogs held up.
They still look retarded.
Whatever -.-.
Oh, and on that pic I am only an inch dropped. I want to go lower but need to put the camber kit on first. I dont have money for that install and the alignment right now -- moving and the puppy have consumed all my monnayyy.
Thank you for the compliments.
Dave -- lmao. After I fell down the stairs, while I was driving to the new house, my fender liner came off. Completely melted. Shoved it back in though. Dont know how my fogs held up.
They still look retarded.
Whatever -.-.
Oh, and on that pic I am only an inch dropped. I want to go lower but need to put the camber kit on first. I dont have money for that install and the alignment right now -- moving and the puppy have consumed all my monnayyy.
#389
Haha. Sorry! Dude. I was moving. And I fell down the stairs. And was immobile. Then, we got our puppy. Finally i am getting back to real life.
Thank you for the compliments.
Dave -- lmao. After I fell down the stairs, while I was driving to the new house, my fender liner came off. Completely melted. Shoved it back in though. Dont know how my fogs held up.
They still look retarded.
Whatever -.-.
Oh, and on that pic I am only an inch dropped. I want to go lower but need to put the camber kit on first. I dont have money for that install and the alignment right now -- moving and the puppy have consumed all my monnayyy.
Thank you for the compliments.
Dave -- lmao. After I fell down the stairs, while I was driving to the new house, my fender liner came off. Completely melted. Shoved it back in though. Dont know how my fogs held up.
They still look retarded.
Whatever -.-.
Oh, and on that pic I am only an inch dropped. I want to go lower but need to put the camber kit on first. I dont have money for that install and the alignment right now -- moving and the puppy have consumed all my monnayyy.
#391
ROTAREDOM
I warned so many people that would happen. Y no one listen?
#392
because you LIYAH!! haha i told her about it last time, its mainly a concern if you are low. mine only got ripped cause of the snow storm we had. the little flaps that quiet the tire noise are usually what get caught and pull the flap into the tire
#394
Racer
Thread Starter