Euronoob's MY11 Accord Euro Luxury
09-07-2011, 04:09 PM
#122
niceeeee
09-28-2011, 11:51 PM
#126
Pro
Thread Starter
Hey guys!! Sorry about not being online lately.. My computer is still not fixed cause I'm a lazy ass kid. Only times I have access to net is at my parents work lol. I've been really busy as well so no new photos but I just went downstairs to take a few iPhone pics. BARE WITH ME GUYS.
By the way, I went lower and my fronts now rub :S both sides are a bit bent so I have to fix that lol. Scrape scrape scrape.
Before the drop:
After the drop:
Side skirts are still not on yet lol.
Edit: I don't know how you guys measure drops but just to be rough, no finger gap at all all round, my lip is 11cm off the ground. Also, I installed my deck lip spoiler
Edit 2: Couldn't get a further away shot from the rear cause there was no space for me to move back lol.
By the way, I went lower and my fronts now rub :S both sides are a bit bent so I have to fix that lol. Scrape scrape scrape.
Before the drop:
After the drop:
Side skirts are still not on yet lol.
Edit: I don't know how you guys measure drops but just to be rough, no finger gap at all all round, my lip is 11cm off the ground. Also, I installed my deck lip spoiler
Edit 2: Couldn't get a further away shot from the rear cause there was no space for me to move back lol.
Last edited by Euronoob; 09-28-2011 at 11:53 PM.
09-29-2011, 01:05 AM
#129
Your accord looks sick, props my man.
09-29-2011, 04:31 AM
#131
looking REAL good man...i think you've done an awesome job modding your car.
09-29-2011, 08:53 AM
#133
You see me, I CU2
That looks gaaawwwwjous, how do the BC's ride? I'm thinking of gettin these for a nice Xmas present LOL
ps. Isn't there a rule in Australia where you can't lower the car past a certain point or something retarded like that?
ps. Isn't there a rule in Australia where you can't lower the car past a certain point or something retarded like that?
09-29-2011, 09:40 AM
#135
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
VOTED for you bro....clean looking car 
09-30-2011, 09:01 PM
#137
Pro
Thread Starter
Yeah Mr.NC, I'm not exactly sure what the limit is but cops measure from the lowest point of your car (which I don't know where it is on my car lol) and I don't think it can be lower than 10cm or so? At the moment, my lip is about 11cm off the ground, I know a few guys running their front lip 4-6 cm off the ground lol.
Thanks a heap man!!
Hahaha, cheers buddy!
10-12-2011, 06:09 PM
#140
Pro
Thread Starter
Haha, cheers MR. NC. My Facebook name? No rape please. (Disregard the URL name...... it was a long time ago lol)
http://www.facebook.com/moocakez
Yeah, I've gotten my fronts rolled and I need to save up for some camber kits 
Not 100% sure about the grille.. Been really lazy lately. Might just leave the car as it is for a while and save up money. I want to buy clothes... haven't bought anything ever since I got the car!
Also, can anyone (Ahem, KillerG..... maybe) help me out with some photoshop? Pics of my car are on this page but could you possibly photoshop TE37SL's on for me?
And maybe even ADVAN RS-D's?
Thank you if you can!!!
http://www.facebook.com/moocakez
Not 100% sure about the grille.. Been really lazy lately. Might just leave the car as it is for a while and save up money. I want to buy clothes... haven't bought anything ever since I got the car!
Also, can anyone (Ahem, KillerG..... maybe) help me out with some photoshop? Pics of my car are on this page but could you possibly photoshop TE37SL's on for me?
And maybe even ADVAN RS-D's?
Thank you if you can!!!
The following users liked this post:
Euronoob (10-13-2011)
10-13-2011, 07:06 PM
#142
Pro
Thread Starter
I don't know which one to go for Leaning more towards the TE's but they're quite popular/common.. Was thinking BBS LM's too but there are quite a few Euro's with BBS LM's here.
Leaning more towards the TE's but they're quite popular/common.. Was thinking BBS LM's too but there are quite a few Euro's with BBS LM's here.
10-13-2011, 07:58 PM
#143
i will photoshop soon
but you cant afford RS-D
if you can i hate you
but you cant afford RS-D
if you can i hate you
The following users liked this post:
Euronoob (10-14-2011)
10-13-2011, 08:34 PM
#144
SeeYou2Crew #2
advans are nice though, but my fav. is the rz
.jpg)
bbs lm
one of my other favorite: ssr lm9
i know thats grigio, but i love it. hehe
since your car is white...
Last edited by ed_423; 10-13-2011 at 08:37 PM.
The following users liked this post:
Euronoob (10-14-2011)
10-13-2011, 08:54 PM
#145
You see me, I CU2
The difference between TE37 and TE37SL is around 400 grams in weight. Crazy to think the price difference is around $200. But you pay to play
Points for street cred and if you decided race/track your car.
A super low offset + super concave face = Maximum Win
Which forum member owns the grigio with the SSR's those look kinda cute
Points for street cred and if you decided race/track your car.
A super low offset + super concave face = Maximum Win
Which forum member owns the grigio with the SSR's those look kinda cute
10-14-2011, 09:17 AM
#150
You see me, I CU2
The following users liked this post:
ed_423 (10-14-2011)
10-14-2011, 10:32 AM
#151
Pro
Thread Starter
Thanks KillerG
Hahah!! I thought about RZ-D's too but chivik or something has them... BUT IF YOU COULD PHOTOSHOP THEM TOO, THANK YOU
And yeah, I've met the guy with the gold SSR's in real life, he lowered his car too, pretty low as well!
My imagination sucks so I can't tell how rims will actually look on MY car....... at the ride height etc etc. If you need more angles of the car, just let me know please!
Yes, I really want concave (if I'm going with the TE's) or dish (RS/RZ/any other rims) that's why I'm trying to find out the 'best' offset for our cars! ANY HELP ANYONE? T-jay has suggested 19x8.5 +38/35 but is there a point in going the 3mm difference? Even with those specs, they're "weak" specs.
Any suggestions/opinions???
Edit:
A friend of mine on COILS, not bags!
http://a2.sphotos.ak.fbcdn.net/hphot...67589858_n.jpg
A CU2 in Australia on bags, I can't remember the specs but the rear's were 10's I think (I don't think you need an account to view.. if so, let me know how I can upload cause you can't just register that easily lol).
http://www.ozhonda.com/forum/showthr...t-Lip%2Fpage12
Hahah!! I thought about RZ-D's too but chivik or something has them... BUT IF YOU COULD PHOTOSHOP THEM TOO, THANK YOU
And yeah, I've met the guy with the gold SSR's in real life, he lowered his car too, pretty low as well!
My imagination sucks so I can't tell how rims will actually look on MY car....... at the ride height etc etc. If you need more angles of the car, just let me know please!
Yes, I really want concave (if I'm going with the TE's) or dish (RS/RZ/any other rims) that's why I'm trying to find out the 'best' offset for our cars! ANY HELP ANYONE? T-jay has suggested 19x8.5 +38/35 but is there a point in going the 3mm difference? Even with those specs, they're "weak" specs.
Any suggestions/opinions???
Edit:
A friend of mine on COILS, not bags!
http://a2.sphotos.ak.fbcdn.net/hphot...67589858_n.jpg
A CU2 in Australia on bags, I can't remember the specs but the rear's were 10's I think (I don't think you need an account to view.. if so, let me know how I can upload cause you can't just register that easily lol).
http://www.ozhonda.com/forum/showthr...t-Lip%2Fpage12
Last edited by Euronoob; 10-14-2011 at 10:36 AM.
10-14-2011, 10:42 AM
#152
You see me, I CU2
That Camry is big on Wrong Fitment Crew/Stance Nation isn't it? Looks familiar
That Black TSX looks niceeeee but the Audi A4 Wins it for me, slammed to the ground altho the GS with the full Junction Produce kit + Maya (Unknown wheel name) comes a close 2nd lol. All 3 on air?
That Black TSX looks niceeeee but the Audi A4 Wins it for me, slammed to the ground altho the GS with the full Junction Produce kit + Maya (Unknown wheel name) comes a close 2nd lol. All 3 on air?
10-14-2011, 10:44 AM
#153
Pro
Thread Starter
Yeah, the Camry is all about StanceNation and stuff. I told him the wheel specs (19x8.5 +38/+35) and he was full giving it to me for having weak specs lol!
The second link, all those guys are on bags. They're in another state from us but yeah, that Audi is absolutely nice! Same with the CL9, that CU2 doesn't really appeal to me.
The second link, all those guys are on bags. They're in another state from us but yeah, that Audi is absolutely nice! Same with the CL9, that CU2 doesn't really appeal to me.
10-14-2011, 10:50 AM
#154
You see me, I CU2
HAHA for him that would be weak specs his specs are low 20's high, teens right?
Ahhh bags the easy way out lol, jus playing CU2 needs non DUB lookin rims and it' be alright. Does your crew roll this heavy? haha
Ahhh bags the easy way out lol, jus playing CU2 needs non DUB lookin rims and it' be alright. Does your crew roll this heavy? haha
10-14-2011, 10:55 AM
#155
ROTAREDOM
I wanna see someone paint one of the stock mags red. lol
10-14-2011, 11:34 AM
#156
Pro
Thread Starter
Agreed, I'm not really into the VIP look; more JDM. And no way, I have no crew hahaha, maybe someday...
You mean paint our stock rims? I don't think our stock rims look good in any colour besides how they are now... I think someone painted theirs black and imho, they did not look good :\
Edit: It's 3am over here, I was hungry and after watching so many of these vids http://www.facebook.com/l.php?u=http...IljQIIlewmtl0g
I was in the mood for hooning so I went to buy some Maccas and just VTEC'd gears 2-4 about 3 times..... Not good, I know but couldn't help it
I hardly do it so don't worry!
Last edited by Euronoob; 10-14-2011 at 11:37 AM.
10-14-2011, 12:03 PM
#157
ROTAREDOM
you mean these?
I don't think it looks too bad, I would have done something different with the centercap though.
I don't think it looks too bad, I would have done something different with the centercap though.
10-14-2011, 11:25 PM
#159
Pro
Thread Starter
Ohh true. Maybe if the centre cap and lug nuts were blacked out too or a different colour it'd suit. Or maybe a full pic of the car could change my opinion lol.
10-15-2011, 11:51 AM
#160
ROTAREDOM
Yeah Ed, its TSX2010M, his thread is still floating around. Here is the full picture
