I've been scouring the net and google for two days looking for a harness that plugs into the amplifier output so i don't have to cut any wires. This is so I can install my line level converter. It has 8 channels.

Later, I will need a harness for the amp input because when i source an Audiocontrol DQXS, it will replace my converter and crossover.

But I can't find either harness. I don't want to run wire from all the speaker locations back to the trunk. Can you guys help?

2010 TSX base w/o navi.

 

use a t-tap to tap into the speakers, i wouldnt try to plug directly into the stock amp. it looks like this http://www.700r4.com/tech/tcc/towing...stall_1_bg.jpg