2G TSX Chat, Chit, and General Info Thread
TSX AMG Type //M i-VVT
B12 service is replace oil, inspect brakes, rotate tires, replace air filter and inspect drive belt.
So in total it should be around $30ish
Do NOT pay $398....
and btw VR1 how much did you pay for your spoiler install?
So in total it should be around $30ish
Do NOT pay $398....
and btw VR1 how much did you pay for your spoiler install?
VTEC just kicked in, yo!
He went to the dealership so I'm guessing a fortune?
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
VTEC just kicked in, yo!
So the Fox exhaust is showing up on eBay now. Anyone gonna bite?
TSX AMG Type //M i-VVT
lol ^ he prob paid like $500+
Whats the fox exhaust... all i could find is this
http://www.ebay.com/itm/Acura-Tsx-09-10-11-12-13-14-Tsudo-SP2-stainless-Cat-back-Exhaust-w-test-pipe-/281723294177?hash=item41980451e1&vxp=mtr
Actually it i tried to remove my muffler to see how it'd sound... the flanges have literally fused themselves together. I guess from the heat? I'm sure my downpipe will be near impossible to remove if i ever get the rv6...
Whats the fox exhaust... all i could find is this
http://www.ebay.com/itm/Acura-Tsx-09-10-11-12-13-14-Tsudo-SP2-stainless-Cat-back-Exhaust-w-test-pipe-/281723294177?hash=item41980451e1&vxp=mtr
Actually it i tried to remove my muffler to see how it'd sound... the flanges have literally fused themselves together. I guess from the heat? I'm sure my downpipe will be near impossible to remove if i ever get the rv6...
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
TSX AMG Type //M i-VVT
So what did you do after that? drill out out and tap in new threads / new bolts?
Just a little infor on the RV6 strait pipe. It does come with 6 new nuts and bolts so I used all of them so the would all match. And took out the ones I bought. Also for the studs and nuts that connect to the cat back on the stock exhaust I cut off the back of the stud and not the bolts because I could not pound out the stud that is left behind in the stock exhaust. So the only way was to cut the back of the stud off to get it out.
Major pain in the ass to do and I did this on the ground with a cutter.
Sorry for the long answer I hope this makes sence ! If not ask away I will try and clear up any parts I can.
Pro
Pro
I invested in a Craftsman Cordless Impact a few years back. At the time it seemed like all I was doing was suspension and wheel work. The battery has lost its juice, as I can only remove 4 lugs before it looses torque, but it has done its duty.
Replacement Li-Ion batteries are expensive. Almost better to buy a new kit than the standalone battery itself.
Replacement Li-Ion batteries are expensive. Almost better to buy a new kit than the standalone battery itself.
Moderator
iTrader: (1)
^no craftsman warranty?!
The following users liked this post:
justnspace (06-23-2015)
Moderator
iTrader: (1)
lol, im being serious. my bro works for sears hardware.
will ask him about your craftsman impact lithium-ion battery.
and I think that guy that is complaining about XLR8 is a tool.
life time warranty doesnt mean life time. lol
will ask him about your craftsman impact lithium-ion battery.
and I think that guy that is complaining about XLR8 is a tool.
life time warranty doesnt mean life time. lol
The following users liked this post:
ulrblitzer (06-23-2015)
TSX AMG Type //M i-VVT
afaik batterys arent covered... but for my Milwaukee drill i sent in the battery and they sent me a new one for cheap
Pro
Hey what's a fair selling price for our CU2 cat back exhaust, given these aren't hot items and there's nothing in the blackmarket for me to use as a baseline? Someone wants to buy mine to chop it up for a project.
Moderator
iTrader: (1)
because they really dont depreciate, you could probably sell it close to brand new.
$300-400
$300-400
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
Itz JDM y0!
Ya it's crazy. Other then getting it done somwhere else however, I don't think I have much choice. I paid $145 for my spoiler install.
If you insist on being lazy Tire kingdom would do all of that for less than 100 bucks. They rotate tires for free
Last edited by Jaheri_cbp; 06-23-2015 at 06:07 PM.
The following users liked this post:
Harper (06-24-2015)
Itz JDM y0!
Of course you have a choice.. Go to Walmart.. Buy a 17mm wrench.. Drain pan.. Oil and oil filter.. And cabin air filter (ALL can be found at WALMART) and do it yourself. And save yourself about 300+... Smh kids these days
If you insist on being lazy Tire kingdom would do all of that for less than 100 bucks. They rotate tires for free
If you insist on being lazy Tire kingdom would do all of that for less than 100 bucks. They rotate tires for free
VTEC just kicked in, yo!
Whats the fox exhaust... all i could find is this
Acura TSX 09 10 11 12 13 14 Tsudo SP2 Stainless Cat Back Exhaust w Test Pipe | eBay
Actually it i tried to remove my muffler to see how it'd sound... the flanges have literally fused themselves together. I guess from the heat? I'm sure my downpipe will be near impossible to remove if i ever get the rv6...![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
Acura TSX 09 10 11 12 13 14 Tsudo SP2 Stainless Cat Back Exhaust w Test Pipe | eBay
Actually it i tried to remove my muffler to see how it'd sound... the flanges have literally fused themselves together. I guess from the heat? I'm sure my downpipe will be near impossible to remove if i ever get the rv6...
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
Two offerings:
http://www.ebay.com/itm/Fox-Duplex-Sportauspuff-Honda-Accord-8-CU2-Limousine-Tourer-ab-2008-1x114mm-/331519597843?pt=LH_DefaultDomain_77&hash=item4d301b9d13
http://www.ebay.com/itm/Fox-Duplex-Sportauspuff-Honda-Accord-8-CU2-Limousine-Tourer-ab-2008-1x100mm-/271260855640?pt=LH_DefaultDomain_77&hash=item3f28682d58
The 114mm tips are way too huge for my liking. The 100mm is more acceptable. I think Asian Candy had the Fox exhaust with a vid on here somewhere.
Pro
Wish I could read that ebay post. Is it German?
Is that also a chop and weld axle back type system too? If so, I'd be more inclined to do a custom magnaflow weld on. Less of a headache.
Is that also a chop and weld axle back type system too? If so, I'd be more inclined to do a custom magnaflow weld on. Less of a headache.
VTEC just kicked in, yo!
Hmm, never looked at it closely to determine whether it's a full catback or something less. I do recall there being a Fox exhaust thread somewhere in the 2G forums though. I'd assume the answer should be there. Sound clip could also be found I think as at least one member I know of has/had it on their car. As far as I can remember, the Fox exhaust isn't some cheap hack-job exhaust and they actually make some systems for other higher end cars too. I'm still holding off for RV6 as it's not a must-buy for me right now. I'm thinking Modulo rear before exhaust.
ROTAREDOM
Hey xtcnrice.. I find your avatar kinda boring. Can you change it please.
The following 2 users liked this post by ssjoeboe9:
MC MiYoung3269 (06-25-2015),
xtcnrice (06-24-2015)
Burning Brakes
Needs to be at like 7600 rpm, and like 83 mph.... that's how you know you're in the top of third gear on a manual...
The following users liked this post:
xtcnrice (06-24-2015)
VTEC just kicked in, yo!
But but.. if you look closely, she's at 1000 km ![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
hahah
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
hahah
The following users liked this post:
optimusaccord (06-25-2015)
TSX AMG Type //M i-VVT
I agree, your avatar is boring. Time for a new one.
The following 2 users liked this post by iCrap:
MC MiYoung3269 (06-25-2015),
xtcnrice (06-25-2015)
VTEC just kicked in, yo!
You're boring, iCrap.
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
ROTAREDOM
I agree iCrap is boring! And kinda nerdy with all his computer junk.
Bottom line.. change your avatar to a sick shot of your BBK and wheel setup. Tired of looking at that gauge cluster.
Bottom line.. change your avatar to a sick shot of your BBK and wheel setup. Tired of looking at that gauge cluster.
Long Friday through Sunday for me coming up. I start work tomorrow at 330am and might not get off until 5pm or later. Back up and out of the house by 6am on Saturday to drive to Eugene Oregon and then back. And then back up early sundaybto work a full shift plus.
Two good things will come out of all of this. I will have my dyno tune done by Vit and I will be making a lot of OT at work![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
But almost zero down time.
Two good things will come out of all of this. I will have my dyno tune done by Vit and I will be making a lot of OT at work
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
But almost zero down time.
Everyday I'm rofling
Or change your avatar to boobs. Everyone loves boobs.
Pro
Long Friday through Sunday for me coming up. I start work tomorrow at 330am and might not get off until 5pm or later. Back up and out of the house by 6am on Saturday to drive to Eugene Oregon and then back. And then back up early sundaybto work a full shift plus.
Two good things will come out of all of this. I will have my dyno tune done by Vit and I will be making a lot of OT at work![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
But almost zero down time.
Two good things will come out of all of this. I will have my dyno tune done by Vit and I will be making a lot of OT at work
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
But almost zero down time.
Burning Brakes
Hey, does anybody happen to have the air intake resonator from the cu2 laying around in their garage that doesn't need it? The one that is down under the front bumper?
I need one.
I need one.
ROTAREDOM
The person you sold your car to is complaining about not having the resonator?
Everyday I'm rofling
I have mine from the CU4, don't know if it's the same design.
TSX AMG Type //M i-VVT
its different on the v6 for sure.