I just bought an Acura blank off Ebay with the ID13 chip in it, and had it cut to fit my car. I know everyone says I have to go to the dealer and have it programmed, but I found these instructions online. Has anybody done this? I tried, but it's not working. I hate having to pay the stealer for anything:

Program Key:

1...your new key
2...a MASTER KEY (one with the remote in it)already programmed to car.
to program the transponder- (thats the immobilizer part)
sitting in dr. seat, put the master key in ignition, and turn to on.engine OFF. press the gas pedal 5 times to floor and release. now press brake 6 times (press and release)
remove master key from ignition. install new key and turn to on...engine off. press gas to floor once. now wait. the security light will blink for about 45-60 seconds, then it will go off if you did it correctly. once the light is off, car should start.

 

i think thats just for the FOB.. you need a computer to program the keys i think