Gauge stopped working

Thread Tools
 
Search this Thread
 
Old Apr 20, 2017 | 05:50 AM
  #1  
scoey5000's Avatar
Thread Starter
1st Gear
 
Joined: Apr 2017
Posts: 1
Likes: 0
Gauge stopped working

My o3 Acura tl gauges power windows moonroof and tranny wont shift pass 2nd gear engine else had this problem .check fuses all ready
Reply
Old Feb 11, 2018 | 08:20 PM
  #2  
jazfe's Avatar
9th Gear
 
Joined: Jan 2016
Posts: 9
Likes: 0
From: Vancouver, Washington
scoey5000,
Did you ever correct your problem. I have the exact same trouble.
Thanks in advance,
Jazfe
Reply
Old Feb 12, 2018 | 12:39 PM
  #3  
Chojun's Avatar
Pro
 
Joined: Sep 2014
Posts: 743
Likes: 94
If your fuses are good then you probably have a bad ground somewhere.

Sorry I don't have time to check the service manual to see which one(s) it might be. Try searching the forums.
Reply
Old Apr 17, 2018 | 04:39 PM
  #4  
jazfe's Avatar
9th Gear
 
Joined: Jan 2016
Posts: 9
Likes: 0
From: Vancouver, Washington
I found the #9 fuse blown. Changed the fuse and as soon I turned the ignition on the fuse blew again. So I have a dead short somewhere in that circuit. I unplugged every thing associated with the #9 fuse and still have a dead short. Next step is to remove the left side wire harness.
This car is new to me and was told everything worked except the transmission when I bought it.
This car also has an aftermarket radio/nav unit so I will also look at the wiring to the center console.
More to come.
Reply




All times are GMT -5. The time now is 11:20 PM.