blinker lever won't work
04-01-2009, 03:41 PM
#1
5th Gear
Thread Starter
Join Date: Aug 2007
Age: 72
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
blinker lever won't work
I bought a 99 tl recently with only a few 152K miles on it.
It has a few problems that can be fixed but the one that I cant figure out is why the turnsignal lever will not return to its neutral position after I turn the steering wheel back. I took the outer casing off and can't find if the the lever is control mechanically operated or electrically. Any advice would be appreciated
04-01-2009, 05:27 PM
#2
Senior Moderator
Sounds like the mechanical link is broken. May need a new stalk (blinker switch).
Yes #10 is the whole assembly.
04-01-2009, 09:46 PM
#5
Senior Moderator
04-01-2009, 10:21 PM
#6
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
Or
You could be low on Blinker Fluid:
http://kalecoauto.com/index.php?main...&products_id=6
Too bad they're sold out. Ask around though, you might get lucky.
I only had 40 more minutes of April 1st and pulled a prank yet. ;shrug:
You could be low on Blinker Fluid:
http://kalecoauto.com/index.php?main...&products_id=6
Too bad they're sold out. Ask around though, you might get lucky.
I only had 40 more minutes of April 1st and pulled a prank yet. ;shrug:
Thread
Thread Starter
Forum
Replies
Last Post
snorf
2G RDX (2013-2018)
429
11-04-2019 06:44 AM
