Hey Everyone,

So I was trying to get rid of the JDM /A-Spec spoiler I got, but I've decided to keep the spoiler... The hard part is... How do I wire it in, I know how to drill and seal the holes, but I'm not exactly sure on the wiring part... because on the spoiler there are only 3 wires... and 3 lights, so the 2 lights on top come on with the regular night lights and the led strip comes on when you press the brakes...

So do all 3 wires hook up somewhere, or do I need a harness or what?

Guys I'm f#@&ing puzzled... And "YES" I did do a search, both nothing exact on the wires and where to connect them too...

Thanks in advance... and have a great one!

 

The third brake light has 2 wires one for 12V power and the other for ground. These you can hook to the stock spoiler 3rd brake light harness that is in the middle of your trunk. The 3rd wire is a power only (12V) wire that powers both lights at the end of the spoiler. This you can hook to the taillights power source which you can tap easily from the trailer hitch harness that is located in the back left side of the trunk near your left taillight area.

 

"c0v3rr1d3" your f#@&ing astonishing... Wicked thanks alot dude... great help!