Labor Cost For Crank Pulley Install...
#4
You used the word ~set~
If that means the 3 pulleys expect 1.5-2.0 hours labor and a 6 pack is always nice!
For just the crank pully- most shops from 60-100 for the labor only
Make sure you have correct new belts to match- Call Josh at Excelerate
If that means the 3 pulleys expect 1.5-2.0 hours labor and a 6 pack is always nice!
For just the crank pully- most shops from 60-100 for the labor only
Make sure you have correct new belts to match- Call Josh at Excelerate
Trending Topics
#10
-Arsenic-
I work at a dealership so I just have a mechanic do after hours stuff. The mechanic I use said he would do all three for about 25 bucks when I get them. Lets put it this way, to replace water pump, timing belt, install springs, install SPC control arms, and do a 4 wheel alignment, it was $350. lol.
#11
I got my pulley set install yesterday and I use Napa Belts (same as Gates Belts). They charge me $100 and did a great job. Paid $25 for both belts. Took about 1 1/2 hrs. Guess I would have to wait a few days to really see the horsepower improvement...but I can already feel the big difference as of right now. Just thought I let the members know...later.
#12
now with four rings
Join Date: May 2006
Location: Bixby, OK
Age: 42
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
like it's already been beat to death before -- i think it's more of a throttle response you get from putting on a crank pulley rather than horsepower gains....when i first got my crank pulley put on, i could really feel the difference in throttle response...
#13
Your not adding HP with a UR- you are unlocking or freeing up about 8HP already in the engine with the loss of rotatotional mass, decreased AC speed, and faster rev to the power band
#15
UR Unorthodox Racing makes the pulleys
contact acurazine vendors excelerate or MrHeelToe, listed in the Off Topic section here- sponsored sales
contact acurazine vendors excelerate or MrHeelToe, listed in the Off Topic section here- sponsored sales
#18
Former Sponsor
iTrader: (1)
Originally Posted by mkt 98 TL
will the new pulleys throw the balance of the crank off,, cause i know that the stock crank pulley has a balancer integrated into it....
Thread
Thread Starter
Forum
Replies
Last Post
MrHeeltoe
1G TSX Tires, Wheels, & Suspension
20
02-23-2023 01:54 PM
MrHeeltoe
2G TSX Tires, Wheels & Suspension
3
09-29-2015 10:43 PM
MrHeeltoe
3G TL Tires, Wheels & Suspension
0
09-28-2015 05:43 PM