Was planing on buying a harness bar for my 02 Acura TL type s I been doing research and all I can find is universal bars and don't know if they will fit properly ? I measured from seat belt post to post and its 49 inches I found a harness bar that is 49 inches anyone done this to there's yet ? Let me know asap

 

I had one installed in my 03 Acura CL.

I have a 50.5" Nrg harness bar and a 49" Nrg bar. Neither one has been installed or used, only test fit. They are for sale in my sale thread on here.

I also have a Pegasus Racing Harness Guide Bar for sale that I used for around 1-2 years. It fits as a harness bar or C-Pillar Bar.

I am selling all 3 for cheaper than you can find online or ebay.

I had a custom roll bar welded in this winter so don't need harness bar anymore.

 

here is my sale thread with 3 bars in it.

https://acurazine.com/forums/car-par...-n-etc-921581/

If you have any other questions let me know. I doubt anyone else on here has experience with harness bars.

 

Finally some ones that has found one for this car lol but I will take those off your hands the second I have the cash!

 

Hey do they both fit the TL cause I measured from seat belt bracket to the other bracket and its 49" exact so wondering if it will fit properly cause you have a 50.5 inch also I'm confused

 

Can't say for sure if the NRG bars will fit. My CL is around 51" and the angle of the pillar might be different. They are slightly adjustable(end brackets pivot) and universal.

The Pegasus Racing Harness Guide bar is more adjustable and should fit. It is made for the harness to go over and bolt to rear seat section. It is not meant to attach harness directly to bar.

The reason I have 3 bars is because I had to find one that fit my car and had to pay with my wallet to test fit bars. With these cars there is no one to copy, you have to do all the research and test fitting yourself.