ran into a lowering issue. looked in DIY

Thread Tools
 
Search this Thread
 
Old 03-21-2009 | 03:04 PM
  #1  
Rockstar21's Avatar
Thread Starter
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
ran into a lowering issue. looked in DIY

dropping the car today on the eibach kit i picked up for a good price.

very simply put.. the strut mount wont fit on to the new spring..

ps. this is the front we're having issues with

could i have just received the wrong part #

and yes, big springs up front.. so i dont have them swapped...

any help is appreciated.

-matt-
Old 03-21-2009 | 03:13 PM
  #2  
Rockstar21's Avatar
Thread Starter
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
nvm... apparently i had them swapped anyway...

never had small springs up front before..
Old 03-21-2009 | 03:23 PM
  #3  
01tl4tl's Avatar
Team Owner
 
Joined: Sep 2006
Posts: 33,535
Likes: 1,137
now get it aligned- if the camber is less than neg 1.5 degrees
just set the toe and let it go
Old 03-21-2009 | 03:32 PM
  #4  
Rockstar21's Avatar
Thread Starter
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
i use camber kits for peice of mind anyway..

can anyone explain why the springs for this car are smaller on engine side?

i sat scratching my head for a while at this... if i remember right "its been a while" the springs on both my accords were wider in the front and smaller/more coiled in the back..

Last edited by Rockstar21; 03-21-2009 at 03:35 PM.
Old 03-21-2009 | 04:47 PM
  #5  
ProjectTLS's Avatar
o.O
 
Joined: Aug 2008
Posts: 424
Likes: 0
From: Earth
its usually the ones with the coils more closer together and thicker go to the front. gl with the project and post some pics when done!
Old 03-21-2009 | 06:11 PM
  #6  
Rockstar21's Avatar
Thread Starter
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
we got the front done no problem after wasted time eating and trying to fit on the rear springs to the front strut lol..

so fronts done today.. and tomorrow we'll get the back done in an hour or less..

so its ridin dragster for the night lol
Old 03-21-2009 | 06:20 PM
  #7  
jjashaa's Avatar
Avant Garde Wheels
iTrader: (23)
 
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
lol



you must've faceplam'd when you figured it out.. lol
Old 03-22-2009 | 02:53 PM
  #8  
twistedwedge's Avatar
6MT Someday..
 
Joined: Jun 2008
Posts: 1,229
Likes: 0
From: Louisville Ky
hey-I remember discussing this same thing with jjashaa a couple of weeks ago..

glad you got it figured out.
Old 03-23-2009 | 01:30 PM
  #9  
Rockstar21's Avatar
Thread Starter
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
Originally Posted by jjashaa
lol



you must've faceplam'd when you figured it out.. lol
i was 100% positive i had it all right.. and im sitting there comparing part numbers and calling eibach... it was a mess.. all i had to do was reach over and grab the other pair of springs.

it didnt help that i was back seat installing.. i was supposed to be watching and learning so i could drop the TL lower later on but i made matters worse by screaming ITS THE BIG ONES from the lawn chair and beer filled ice chest..

oh well.. i took the seats out

pics later
Old 03-23-2009 | 01:37 PM
  #10  
jjashaa's Avatar
Avant Garde Wheels
iTrader: (23)
 
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
^ LOL!

oh man...
Old 03-23-2009 | 01:43 PM
  #11  
ZEUS'O3TL's Avatar
Low & Slow w/Dubz On My
 
Joined: Jan 2008
Posts: 3,077
Likes: 0
From: MIL-TOWN, WI
wzup wit ur avatar?
Old 03-23-2009 | 01:45 PM
  #12  
Rockstar21's Avatar
Thread Starter
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
Originally Posted by jjashaa
^ LOL!

oh man...
tell me about it.. the guy who did most of the work volunteered...
no work like free work lol

no just to decide on wheels before the beach meet.

and getting these damn fender vents from pep boys off is gonna be a bitch
Old 03-23-2009 | 01:48 PM
  #13  
jjashaa's Avatar
Avant Garde Wheels
iTrader: (23)
 
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
Originally Posted by Rockstar21
tell me about it.. the guy who did most of the work volunteered...
no work like free work lol

no just to decide on wheels before the beach meet.

and getting these damn fender vents from pep boys off is gonna be a bitch
haha.
Old 03-23-2009 | 01:50 PM
  #14  
Rockstar21's Avatar
Thread Starter
The Dumb One
iTrader: (1)
 
Joined: Aug 2008
Posts: 11,810
Likes: 373
From: Baton Rouge, LA
Originally Posted by jjashaa
haha.
havent you heard... my car was built there lol
Old 03-23-2009 | 01:53 PM
  #15  
jjashaa's Avatar
Avant Garde Wheels
iTrader: (23)
 
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
Originally Posted by ZEUS'O3TL
wzup wit ur avatar?
whos' avy?
Originally Posted by Rockstar21
havent you heard... my car was built there lol
oh i see....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Yumcha
Automotive News
9
02-25-2020 09:57 AM
giovane
2G RDX DIY & FAQ
12
07-08-2016 10:46 PM
chrisr
5G TLX Audio, Bluetooth, Electronics & Navigation
4
12-04-2015 02:17 AM
ptbarnett
3G RLX (2013+)
4
08-30-2015 12:39 PM



Quick Reply: ran into a lowering issue. looked in DIY



All times are GMT -5. The time now is 08:40 AM.