cal6tl

would it be easier if i just get a wrecked 6 speed CL-S to swap everything to my TL-P??

thanks

AznWay

iTrader: (8)

Good Luck finding one

juanclopez2786

iTrader: (3)

^word! i cant wait to start buyin my parts for the swap

cal6tl

i found one already but i just donno if its easier to buy a wrecked one instead of buying parts

TequiLa

iTrader: (3)

depends how it's wrecked, but a lot cheaper than buying new parts of course.

gfrg88

iTrader: (2)

Full parts car will always be better.. You have everything you need in front of you... Wish I could find one

thinhthan

yea man i been looking for one for a while now

cal6tl

so is that mean i dont need any new parts as long as all the parts is in good shape? and is it a easy swap that way?

thanks everyone helping me

6MTUA5

iTrader: (2)

As long as none of the parts you need to swap are damaged, then you are good. Even if the trans, sensors, wiring, etc is in good shape and other stuff is messed up you are still getting a hell of a deal.

cal6tl

is this engine still good to do a swap??

cal6tl

is this wrecked car still good to do a swap??

fsttyms1

???? we cant see what if any type of damage may have happened to the motor from that shot. But IF nothing is wrong with the motor of course pulling the parts from a used donor car like that is going ot be cheaper and easier than buying them new. You will probably want to buy a new clutch and flywheel though with every thing out of the car

6MTUA5

iTrader: (2)

We can't really tell what's wrong with it from the pic

You could at least get some other parts that are needed if that's a 6MT

phee

iTrader: (5)

i cant see pics, but if the car is wrecked in the rear or sides its a good deal.

if its wrecked in the front i would look elsewhere.

Adam bought parts from a wrecked car only to find out that the block and tranny were cracked.

cal6tl

oh icic well those guys told me that the car run fine just the radiator is cracked so maybe its a good wrecked car but still deciding

fsttyms1

If they say every thing is ok and it is then i would look at it.

cal6tl

so you think i should go check it out first?

zeta

iTrader: (1)

From the looks of the picture the passenger side strut tower may have shifted a little towards the pulley side of the motor. It would be prudent to go look for yourself. Take a good flashlight and check to see if the pullies have not come in contact with the 'side structure' (for the lack of a better word)that the motor mount attaches to. If not, you may have a hell of a deal!

cal6tl

yea i was thinking about to flight down there and take a look in a couple weeks