ScottayHiFive

iTrader: (2)

Naw mang it goes
1st Prong:Red w/ yellow line, 2nd Prong: Blank
3rd Prong: Red w/ black line, 4th Prong: Black wire
5th: Red wire

thinhthan

ok ima go try that now. i thought you guys said any one the red wire thats why

phee

iTrader: (5)

finishing mine up today

assclown

iTrader: (1)

ScottayHiFive

iTrader: (2)

Nice work! I love mines until you look at it closely haha cause I didnt mold it right. Are planning on putting hids in them or just using the bulbs it came with?

assclown

iTrader: (1)

i threw away the bulbs that came with it when i got the package, i got 3000k kit. pretty damn bright.

Ep3moschini

I will be doing this over the winter. I was half tempted to do a front end conversion just for the headlights. . . But I love my 01' front end so much

assclown

iTrader: (1)

eh, i'd rather do projector retrofit but since this tree branch fell on my car and i have to pay the deductable, that project is on hold now.

Ep3moschini

I messed up when I posted "headlights" I was supposed to post "foglights"

I really want foglights

JterrorC

iTrader: (1)

so i didnt have silicone but i had time to change my cracked old one...this is my 3rd set...sob...did it differently this time around...insight anyone...

before


after


behind


why doesnt the hid turn all the way to lock into place....jus a lil


my old fog were connected to the parking brakes...so i want to redo everything to hav a switch for it...but my wires arent the same colors...so confused....i read many of the post....started being helpful around the 50s den i got lost..


so heres what im thinkin....instead of using the cars fuse box....doesnt it already come with a fuse....

so i would jus need the switch rite...cant i jus throw away the grey connectors n jus use extra wires as an extensions...connect the fuse cable to the battery (like the amplifiers fuse)...

am i getting somwhere here?

also...what is the relay for?

JterrorC

iTrader: (1)

somone help...my bumpers in the kitchen...i dont wanna put it on n hav to take it apart again..

6MTUA5

iTrader: (2)

The relay is for the switch

When the switch is switched from on to off the relay kicks in

You can wire it straight to the battery, or just try and find another constant source for power. Tap into whatever has constant power. You aren't going to the car's fuse bow for the fuse. You are tapping into the fuse bow to get power. The fogs should have a fuse of its own.

JterrorC

iTrader: (1)

ight so i could figure out the damn switch...went to autozone got me this cool lookin touch switch....wired it up didnt work....wth....this is the setup....

emaka9

iTrader: (3)

very nice DIY.

DONZ3.2TL

I picked up some fogs off of eBay and they don't fit into the pocket. I heard some people say they had to modify the fog light housing and some say it fit perfect. Can someone tell me which fogs they picked up with out modifying the foglight housing to fit? Thanks!

assclown

iTrader: (1)

there aren't any, i used the 01-03 civic fogs and i had to cut away at the housing, you wouldn't be able to tell because the parts that i cut are behind the bumper. dremel is your best friend.

DONZ3.2TL

Thanks bro! Just wanted to make sure before I start cutting away! I'm going to start this project tonight! One other question, did you mount your HID ballast in the bumper or on the frame?

assclown

iTrader: (1)

i got the ballasts with mounting eyes in them, so i was able to bolt them to the frame. i don't like trusting double sided tape.

DONZ3.2TL

Good to know, I have them fitted into my bumper now, and will do the wiring tonight after work. Thanks again, and I'll try and post pics after the install.

weirdxpsycho

yay

DONZ3.2TL

Mission accomplised! Thanks everyone for the great information!

tc5280

i have been trying to get a deep yellow look for my stock fogs. any ideas on what color temp to get. the two sets i have got are not achieving the color i am looking for.

twill220

how can i get through the firewall w/o cutting metal for fog light install

DONZ3.2TL

If you do back thru the thread you will see a detailed explanantion with a picture that shows where to push out the plug. It's located above the gas pedal.

JterrorC

iTrader: (1)

3k n 2.3k ...or jjust get yellow lens fogs....and u dont need need...just use halogen

xplicitzTL

i finally did this DIY after my school... everything went well and i had to cut the frame but no biggie thanks to dremmel. only problem im having is the wiring. i basically did everything i had to. I attached the red wire to the positive side of my battery. the only thing is i have a wire with a connector that says ignition. i did not plug anything in my fuse box. I have all grounds bolted where am i adding this "ignition Lgnition" wire. bought this off ebay thanks