02 TL-S, what to do? step-by-step...
#44
First I want to say thanks to everyone for their help! ![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
So far done:
- 2Din HU with touch screen
- 2x12" subs with 1200W amp
- Full OEM lip kit
- Rims (which i'll probably sell soon)
- Front Drilled & Slotted rotors
- CAI
- AZ stickers![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
- new bulbs
- Coilovers
What do you think to do next?
I'm thinking about exhaust. I really wanna get ATLP one, but before i'll have enough money, what will you suggest to do?
Let's say mods under 500.
Thanks for your time guys!
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
So far done:
- 2Din HU with touch screen
- 2x12" subs with 1200W amp
- Full OEM lip kit
- Rims (which i'll probably sell soon)
- Front Drilled & Slotted rotors
- CAI
- AZ stickers
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
- new bulbs
- Coilovers
What do you think to do next?
I'm thinking about exhaust. I really wanna get ATLP one, but before i'll have enough money, what will you suggest to do?
Let's say mods under 500.
Thanks for your time guys!
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
#45
If you going for looks i might suggest looking into the mugen replica wing from heeltoe, blacking out your headlights, hid fogs and foglight mod, progress rear sway bar, neuspeed upper strut bar, im and tb spacers from p2r.
you can do all that for just about $500.
1. Mugen Rep Wing: $300 (about)
2.Blackout Headlights: Free DIY
3.HID foglights: $60 from hidextra (a vendor on here)
4.Progress sway bar:$140 excelerate performance (a vendor on here)
5.Neuspeed Upper Strutbar: not sure but i think around $150 (correct me if im wrong)
6.Spacers: 140 also from excelerate performance
Thats a bit over your $500 limit but its both performance and for looks.
you can do all that for just about $500.
1. Mugen Rep Wing: $300 (about)
2.Blackout Headlights: Free DIY
3.HID foglights: $60 from hidextra (a vendor on here)
4.Progress sway bar:$140 excelerate performance (a vendor on here)
5.Neuspeed Upper Strutbar: not sure but i think around $150 (correct me if im wrong)
6.Spacers: 140 also from excelerate performance
Thats a bit over your $500 limit but its both performance and for looks.
#47
291hp & 245 tq @ 3.5psi
For Power: Header, thermoblock spacers, pulley
For Sound: Remove resonator, aftermarket exhaust
For Free: De-badge, foglight mod, blackout/or clear headlight
For Sound: Remove resonator, aftermarket exhaust
For Free: De-badge, foglight mod, blackout/or clear headlight
#50
If your looking for more free or the other mods that you can check the diy section fot the 2gen. There are a lot of diys in there and its been updated also very very organized thanks to our moderater we all know who of course lol
#51
Okey, i have another question for you.
I have already TANABE SMF, rear sway bar and new end-links @ my garage.
Time for the headers and catalic.
I'm on my way to buy new "old" AlphaWerk headers, 2nd version, never installed.
What do you think of them?
And what are you usually doing with catalic? i don't want to remove it on my TL ^_^
And here some pics on stock rims due the drop.
![](http://farm4.static.flickr.com/3261/3785685902_c4761f1a3d.jpg)
I have already TANABE SMF, rear sway bar and new end-links @ my garage.
Time for the headers and catalic.
I'm on my way to buy new "old" AlphaWerk headers, 2nd version, never installed.
What do you think of them?
And what are you usually doing with catalic? i don't want to remove it on my TL ^_^
And here some pics on stock rims due the drop.
![](http://farm4.static.flickr.com/3261/3785685902_c4761f1a3d.jpg)
![](http://farm4.static.flickr.com/3470/3784872461_60623f0e55.jpg)
#55
So updates: it was temp sensor. didn't change it coz waiting to install headers.
I need your quick help and good memory.
I bought AlphaWerks headers (AWHDACLTS01UP) and Tanabe Super Medalion Hyper (60mm pipes) exhaust.
I'm not sure about headers pipes. They looks vry close to 60mm, but i can't find any info on the internet.
Do you guys remember the specs of the headers?
And what catalic i need?
catback is already installed with stock catalic and headers
I need your quick help and good memory.
I bought AlphaWerks headers (AWHDACLTS01UP) and Tanabe Super Medalion Hyper (60mm pipes) exhaust.
I'm not sure about headers pipes. They looks vry close to 60mm, but i can't find any info on the internet.
Do you guys remember the specs of the headers?
And what catalic i need?
catback is already installed with stock catalic and headers
Thread
Thread Starter
Forum
Replies
Last Post
MetalGearTypeS
3G TL Audio, Bluetooth, Electronics & Navigation
6
08-29-2016 08:28 PM
LogicWavelength
3G TL Photograph Gallery
33
11-01-2015 09:38 AM