Show us your aftermarket and OEM wheels on your RL
#281
Senior Moderator
Mexi-flush! I wouldn't drop any more than Aspec springs with the wheels sticking past the fenders. Aspecs will give you 0.75" drop. The other option is H&Rs which give 1.4", but you'll hit your tires.
#282
Instructor
#283
Senior Moderator
H&Rs run $215. Aspecs come as a complete coilover kit, but many have swapped the springs for H&Rs, leaving Aspec springs available at an unregulated price. Of course, that doesn't include installation which is generally ~$200.
#284
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
What's your budget looking like, Manny?
If you can swing it and care, I'd suggest going for full on coilovers...then you can adjust to what you like. Even out front and back etc...
Don't forget when you go lower you'll end up getting more camber which will tuck the tire in at the top more. Will look great...you could even get a camber kit to ADD some negative camber to clear fender...roll fenders etc.
Trust me, we ALL start off saying we don't want to roll fenders and get too intense, but stick around long enough and it'll get the best of you. Once you see your car sitting low and flush you probably won't be able to settle for less. It's a sickness for a reason.
If you can swing it and care, I'd suggest going for full on coilovers...then you can adjust to what you like. Even out front and back etc...
Don't forget when you go lower you'll end up getting more camber which will tuck the tire in at the top more. Will look great...you could even get a camber kit to ADD some negative camber to clear fender...roll fenders etc.
Trust me, we ALL start off saying we don't want to roll fenders and get too intense, but stick around long enough and it'll get the best of you. Once you see your car sitting low and flush you probably won't be able to settle for less. It's a sickness for a reason.
#285
Instructor
Stop it!!!
What's your budget looking like, Manny?
If you can swing it and care, I'd suggest going for full on coilovers...then you can adjust to what you like. Even out front and back etc...
Don't forget when you go lower you'll end up getting more camber which will tuck the tire in at the top more. Will look great...you could even get a camber kit to ADD some negative camber to clear fender...roll fenders etc.
Trust me, we ALL start off saying we don't want to roll fenders and get too intense, but stick around long enough and it'll get the best of you. Once you see your car sitting low and flush you probably won't be able to settle for less. It's a sickness for a reason.
If you can swing it and care, I'd suggest going for full on coilovers...then you can adjust to what you like. Even out front and back etc...
Don't forget when you go lower you'll end up getting more camber which will tuck the tire in at the top more. Will look great...you could even get a camber kit to ADD some negative camber to clear fender...roll fenders etc.
Trust me, we ALL start off saying we don't want to roll fenders and get too intense, but stick around long enough and it'll get the best of you. Once you see your car sitting low and flush you probably won't be able to settle for less. It's a sickness for a reason.
The following users liked this post:
Ratheruneeq (08-09-2015)
#287
Senior Moderator
No worries. Coilovers will set you back $1.6k before install and there is no camber kit for the RL.
#289
Senior Moderator
$415?
#292
Instructor
im giving in
gonna try and find some Aspec springs. there was someone on here selling them but hes frontin now so i'll be on the hunt. damn you all lol
#296
hey everyone im stuck in an offset question. im thinking about getting these wheels 19x10 +15 http://www.nlmotoring.com/XXR-531-Wh...p/53190433.htm that also come in 19x10 +35 im just wondering if any of those two will clear the front calipers?
#297
Drifting
hey everyone im stuck in an offset question. im thinking about getting these wheels 19x10 +15 http://www.nlmotoring.com/XXR-531-Wh...p/53190433.htm that also come in 19x10 +35 im just wondering if any of those two will clear the front calipers?
The following users liked this post:
ValdezQ26 (10-07-2020)
#300
I was really interested in these rims and theres a shop by me that I can walk in and get them so I liked that but everyone and there grandmas have these wheels on there car around me now they played them out fast...... looks really nice on your rl minus the flat black shit.
The following users liked this post:
HEAVY_RL (03-18-2014)
#301
Senior Moderator
The following users liked this post:
oo7spy (04-13-2014)
#304
Senior Moderator
Will you post more from the side? I was in love with those wheels until I saw them on an '05. They didn't look right, but that looks surprisingly good.
The following users liked this post:
nitram1222 (04-26-2014)
#305
The following users liked this post:
Carbon Legend (04-22-2014)
The following users liked this post:
Ratheruneeq (08-09-2015)
#307
Senior Moderator
The following users liked this post:
oo7spy (04-26-2014)
#310
Senior Moderator
Still looks good. I'm a bit confused, but maybe it's just a great color match.
#312
Advanced
Join Date: Oct 2007
Location: Oxford, England, U.K
Age: 43
Posts: 52
Likes: 0
Received 13 Likes
on
10 Posts
After owning my trafficstar vz reps by s.a.m wheels, I have decided to change up for something wider and a completely different style.
Here is what we had before:
20x8.5 et32 front (225/35/20)
20x9.5 et35 rear (255/30/20)
This is what I have now:
Setup now is:
Ispiri ISR6 Satin Silver / Machined Face
20x10 et37 front (255/30/20) Toyo T1S
20x10 et33 rear (255/30/20) Dunlop sp sportmax
What do you think?
Have heard that 20x10 wouldn't fit because of rubbing. This does not rub at all and I can get full lock on the steering. Front fenders stock, rear fenders rolled/no pull.
Selling my old wheels if anyone is interested with 2 brand new rear tyres and 2 front tyres at 5mm.
Here is what we had before:
20x8.5 et32 front (225/35/20)
20x9.5 et35 rear (255/30/20)
This is what I have now:
Setup now is:
Ispiri ISR6 Satin Silver / Machined Face
20x10 et37 front (255/30/20) Toyo T1S
20x10 et33 rear (255/30/20) Dunlop sp sportmax
What do you think?
Have heard that 20x10 wouldn't fit because of rubbing. This does not rub at all and I can get full lock on the steering. Front fenders stock, rear fenders rolled/no pull.
Selling my old wheels if anyone is interested with 2 brand new rear tyres and 2 front tyres at 5mm.
The following 2 users liked this post by hond-r:
kcjohnnyboy (02-07-2016),
tkosho24v (07-29-2014)
#313
Drifting
They would rub if you had the right size tire on them...
#314
Drifting
Can somebody please make either oo7, Heavy or myself a moderator in this forum? We need somebody that frequents the board and isn't afraid to take care of spam posts.
The following users liked this post:
projektvertx (07-11-2014)
#315
Drifting
The following 2 users liked this post by BDoggPrelude:
oo7spy (07-11-2014),
projektvertx (07-11-2014)
#316
#317
Job well done...
Amazing fitment..... pure and clean!
sweet drop as well.... seems you have done your homework with ET figures and tire sizes as well..... very JDM... and I live here in Japan as well so I see this school of stance / wheel fitment everyday! Again, nice job!!!
sweet drop as well.... seems you have done your homework with ET figures and tire sizes as well..... very JDM... and I live here in Japan as well so I see this school of stance / wheel fitment everyday! Again, nice job!!!
After owning my trafficstar vz reps by s.a.m
wheels, I have decided to change up for something wider and a completely different style.
Here is what we had before:
20x8.5 et32 front (225/35/20)
20x9.5 et35 rear (255/30/20)
This is what I have now:
Setup now is:
Ispiri ISR6 Satin Silver / Machined Face
20x10 et37 front (255/30/20) Toyo T1S
20x10 et33 rear (255/30/20) Dunlop sp sportmax
What do you think?
Have heard that 20x10 wouldn't fit because of rubbing. This does not rub at all and I can get full lock on the steering. Front fenders stock, rear fenders rolled/no pull.
Selling my old wheels if anyone is interested with 2 brand new rear tyres and 2 front tyres at 5mm.
wheels, I have decided to change up for something wider and a completely different style.
Here is what we had before:
20x8.5 et32 front (225/35/20)
20x9.5 et35 rear (255/30/20)
This is what I have now:
Setup now is:
Ispiri ISR6 Satin Silver / Machined Face
20x10 et37 front (255/30/20) Toyo T1S
20x10 et33 rear (255/30/20) Dunlop sp sportmax
What do you think?
Have heard that 20x10 wouldn't fit because of rubbing. This does not rub at all and I can get full lock on the steering. Front fenders stock, rear fenders rolled/no pull.
Selling my old wheels if anyone is interested with 2 brand new rear tyres and 2 front tyres at 5mm.
#318
Live in Tokyo and driving this now......2007 Honda Legend KB1
Just got this beast and will be changing it up shortly but decided to share this current state with ya-all!!
2007 Honda Legend Exclusive Package with complete Mugen Aero including Uber-rare M1 package fender flares on Mugen suspension and 18x8 ET55 Mugen drop forged chrome wheels... 245/45/18 tires.....
Plans are to drop this using Largus Full-tap coilovers and TSW Stowe wheels that are 19x9.5 ET20 shod with 235/35/19 tires......
stay tuned for more photos as they develop!
2007 Honda Legend Exclusive Package with complete Mugen Aero including Uber-rare M1 package fender flares on Mugen suspension and 18x8 ET55 Mugen drop forged chrome wheels... 245/45/18 tires.....
Plans are to drop this using Largus Full-tap coilovers and TSW Stowe wheels that are 19x9.5 ET20 shod with 235/35/19 tires......
stay tuned for more photos as they develop!
Last edited by tkosho24v; 07-25-2014 at 07:10 AM.
The following users liked this post:
oo7spy (07-25-2014)
#319
Senior Moderator
Fender flares, huh? How much do the Largus coilovers run?
#320
Racer
iTrader: (1)
[B]Just got this beast and will be changing it up shortly but decided to share this current state with ya-all!!
2007 Honda Legend Exclusive Package with complete Mugen Aero including Uber-rare M1 package fender flares on Mugen suspension and 18x8 ET55 Mugen drop forged chrome wheels... 245/45/18 tires.....
2007 Honda Legend Exclusive Package with complete Mugen Aero including Uber-rare M1 package fender flares on Mugen suspension and 18x8 ET55 Mugen drop forged chrome wheels... 245/45/18 tires.....
In Japan they're about $800 US, but after shipping within Japan, and shipping to US, the cost can be around ~$1k-1.2k depending how/who you get them through