Attempt at an OEM JDM Grill...
#41
Senior Moderator
So the plastic shield is literally just a shield to block debris from the CMBS unit behind the grill (in your observations)?
#42
So they sent me a part that I didnt need. This is part #9 (Non CMBS)
Front
![](https://lh6.googleusercontent.com/-e1mcq94Se9c/UkNJjKG4xQI/AAAAAAAADF8/O0QdfxdJQM4/w650-h488-no/IMG-20130925-00416.jpg)
Back
![](https://lh5.googleusercontent.com/-gGKV9s85cvM/UkNJyeZCcEI/AAAAAAAADGE/mwBEkyTixVs/w650-h488-no/IMG-20130925-00417.jpg)
The difference with #10 is imagine the 4 parts that are 3D shaved down so that back part is flat and the front, instead of holes for the emblem, the emblem is already there but it is covered in clear plastic like the pic of my grill. #10 is slightly heavier but not visible electrontic and no plugs or anything.
Front
![](https://lh6.googleusercontent.com/-e1mcq94Se9c/UkNJjKG4xQI/AAAAAAAADF8/O0QdfxdJQM4/w650-h488-no/IMG-20130925-00416.jpg)
Back
![](https://lh5.googleusercontent.com/-gGKV9s85cvM/UkNJyeZCcEI/AAAAAAAADGE/mwBEkyTixVs/w650-h488-no/IMG-20130925-00417.jpg)
The difference with #10 is imagine the 4 parts that are 3D shaved down so that back part is flat and the front, instead of holes for the emblem, the emblem is already there but it is covered in clear plastic like the pic of my grill. #10 is slightly heavier but not visible electrontic and no plugs or anything.
The following users liked this post:
oo7spy (09-26-2013)
#44
Ultimately, it's easier to wash the shield than to try to clean the crud off the sensitive radar unit behind it.
Congrats on the successful conversion, but some sort of shield would seem advisable.
Congrats on the successful conversion, but some sort of shield would seem advisable.
#45
Senior Moderator
If the emblem housing has a solid back, then the shield seems redundant.
#47
Senior Moderator
I am 99% certain that it has taken 8 years here to discover the that plastic shield has no electronic purpose.
The following users liked this post:
ChocBoyWonder (09-26-2013)
#50
Senior Moderator
KB1Spec only had a 2008 Tech I. https://acurazine.com/forums/2g-rl-photograph-gallery-91/06-tl-08-rl-501330/
Since the shield is plastic, it is susceptible to UV damage causing hazing. We have seen threads here where people were nervous to buff the shield thinking it was critical to the CMBS/ACC. Up until yesterday, I thought it had an ACC component in it.
Since the shield is plastic, it is susceptible to UV damage causing hazing. We have seen threads here where people were nervous to buff the shield thinking it was critical to the CMBS/ACC. Up until yesterday, I thought it had an ACC component in it.
#51
KB1Spec only had a 2008 Tech I. https://acurazine.com/forums/showthread.php?t=501330
Since the shield is plastic, it is susceptible to UV damage causing hazing. We have seen threads here where people were nervous to buff the shield thinking it was critical to the CMBS/ACC. Up until yesterday, I thought it had an ACC component in it.
Since the shield is plastic, it is susceptible to UV damage causing hazing. We have seen threads here where people were nervous to buff the shield thinking it was critical to the CMBS/ACC. Up until yesterday, I thought it had an ACC component in it.
#52
Yeah the shield is just there to protect the radar unit...The non ACC grill is much smaller where the emblem sits and the ACC grill opening is much bigger to allow the radar to work properly.
#53
So I got the rest of my aspec kit and installed the front yesturday so I decided to take pics of the back of the shield and the CMBS unit...
Back of the shield
![](https://lh4.googleusercontent.com/--jCOLtRqIvU/UkaS1ywMefI/AAAAAAAADHM/9kS5e01r6VQ/w958-h719-no/IMG-20130927-00424.jpg)
CMBS Unit
![](https://lh5.googleusercontent.com/-8lS7z6LSTkI/UkaS13Q5cxI/AAAAAAAADHY/0YQrEKTL0cU/w958-h719-no/IMG-20130927-00422.jpg)
And for kicks in case anyone cared what the Headlight washer unit looked like (I always did), here it is. The pink and yellow thing at the side is the ear plug I had to use to stop the washer fluid from leaking. The PDF was US based :S
Back of the shield
![](https://lh4.googleusercontent.com/--jCOLtRqIvU/UkaS1ywMefI/AAAAAAAADHM/9kS5e01r6VQ/w958-h719-no/IMG-20130927-00424.jpg)
CMBS Unit
![](https://lh5.googleusercontent.com/-8lS7z6LSTkI/UkaS13Q5cxI/AAAAAAAADHY/0YQrEKTL0cU/w958-h719-no/IMG-20130927-00422.jpg)
And for kicks in case anyone cared what the Headlight washer unit looked like (I always did), here it is. The pink and yellow thing at the side is the ear plug I had to use to stop the washer fluid from leaking. The PDF was US based :S
![](https://lh5.googleusercontent.com/-aWFsFpFIS_8/UkaS2fwQWII/AAAAAAAADHg/T6KGV6I-FJU/w958-h714-no/IMG-20130927-00425.jpg)
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
Hines57
Car Parts for Sale
0
09-24-2015 01:58 PM