2017 Advance Pkg Fog Bulb Replacement
#1
Inveterate Tinkerer
Thread Starter
2017 Advance Pkg Fog Bulb Replacement
I'm looking for a whiter replacement for the stock Halogen bulbs installed in the factory advance package fog lights.
Others have mentioned in assorted posts, and I agree, it looks odd to have those jewel like LED headlights and their white light accompanied by yellow(ish) halogens below. Unfortunately replacement LED kits are pricey for the fogs and not in this owner's budget. Has anyone tried the Sylvania H11 SilverStar zXe halogen as a replacement? It's supposedly as bright a white as we can get without going to LED or Xenon and (big upside) it's plug and go. It's still not 'white' though.
I'm just curious whether any forum members have tried these (or other alternatives) to try and improve the mismatched look and whether you consider the change a success.
Thanks!
Others have mentioned in assorted posts, and I agree, it looks odd to have those jewel like LED headlights and their white light accompanied by yellow(ish) halogens below. Unfortunately replacement LED kits are pricey for the fogs and not in this owner's budget. Has anyone tried the Sylvania H11 SilverStar zXe halogen as a replacement? It's supposedly as bright a white as we can get without going to LED or Xenon and (big upside) it's plug and go. It's still not 'white' though.
I'm just curious whether any forum members have tried these (or other alternatives) to try and improve the mismatched look and whether you consider the change a success.
Thanks!
#2
Inveterate Tinkerer
Thread Starter
Belay that request, I've found LED replacements that are priced right and direct (plug in) replacements. I'll post results after installation.
Thanks!
Thanks!
#3
Inveterate Tinkerer
Thread Starter
![Thumbs up](https://acurazine.com/forums/images/icons/icon14.gif)
This turned out to be a very simple 20 minute upgrade.
I ordered LED H11 bulbs here: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
There are a few complaints in the reviews section about their brightness but I was nearly blinded after plugging each bulb (for testing) into a 12v power supply. Installation is just a matter of removing one screw and two plastic plugs on each side of the car, pull the fender liner back, reach in to remove the OEM Halogen bulb (just a slight twist to the left) then removing the connector. Plug the connector into the new bulb, put the bulb in the socket, twist to the right and the LED is in. Put the fender liner back in place, replace the plugs and screw and done! Here's the before (yellowish) and after (white LED matches headlights) result. One caveat, I have no idea whether this will still function as a fog light is supposed to with a distinct cut off in front and to the side. Where I live (Phoenix) it doesn't matter but if you're in fog country it might.
I ordered LED H11 bulbs here: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
There are a few complaints in the reviews section about their brightness but I was nearly blinded after plugging each bulb (for testing) into a 12v power supply. Installation is just a matter of removing one screw and two plastic plugs on each side of the car, pull the fender liner back, reach in to remove the OEM Halogen bulb (just a slight twist to the left) then removing the connector. Plug the connector into the new bulb, put the bulb in the socket, twist to the right and the LED is in. Put the fender liner back in place, replace the plugs and screw and done! Here's the before (yellowish) and after (white LED matches headlights) result. One caveat, I have no idea whether this will still function as a fog light is supposed to with a distinct cut off in front and to the side. Where I live (Phoenix) it doesn't matter but if you're in fog country it might.
#4
Pro
Thanks for being the Guinea pig, since I was wanting to do the same to my own 2016 RDX. It sounds like an easy change to make and at $32.95 there is not a big risk.
There is no doubt that the matching colors look much better. Since many people drive with their fog-lights on a daily basis, I am wondering if these will cause glare to oncoming drivers. Amazon lists them as "Fog Light Bulbs", and they appear to have a lens at the tip, so quite possibly they are designed to reproduce the light patterns of an incandescent H11 bulb. Let us know your opinion of the light patterns after you have a few days to test them out.
There is no doubt that the matching colors look much better. Since many people drive with their fog-lights on a daily basis, I am wondering if these will cause glare to oncoming drivers. Amazon lists them as "Fog Light Bulbs", and they appear to have a lens at the tip, so quite possibly they are designed to reproduce the light patterns of an incandescent H11 bulb. Let us know your opinion of the light patterns after you have a few days to test them out.
#5
New RDX Advance owner of just one week, but already ordered and installed the LED fog light bulbs as shown above. Worked great, were a snap to install (even for my arthritic back and joints - just had a little stool to sit on and could reach everything), and love the look of them. I saw some alternatives on Amazon that were more powerful (about 1200 lumens vs I think 600 for these), but I knew these would work because the OP posted here. And I was a bit concerned that twice as bright might mean too bright for oncoming cars.
Anyhow, glad to be here, and tickled that you guys are posting such useful information. Now to do a search about mounting my Valentine One in it. ;-)
Anyhow, glad to be here, and tickled that you guys are posting such useful information. Now to do a search about mounting my Valentine One in it. ;-)
The following users liked this post:
jcross1231 (05-01-2017)
#6
10th Gear
2016 Advanced RDX
Just installed LED bulbs listed in email string and I'm happy with results. It took me a while to figure out how to remove electrical connection. All you need to do is pinch connector between fingers and it releases.
Just installed LED bulbs listed in email string and I'm happy with results. It took me a while to figure out how to remove electrical connection. All you need to do is pinch connector between fingers and it releases.
The following 2 users liked this post by Carman3:
jcross1231 (05-01-2017),
rraisley (01-13-2017)
#7
Trending Topics
#8
Pro
You mentioned that you could have installed an alternative at twice the Lumens. Do you find that these replacements throw as much light on the ground as the OEM lights? Do you think the 1200 Lumens would have been a better choice?
Your comment about "not blinding oncoming cars" is a valid one. A bulb that scatters light everywhere could also blind the driver himself. Have you noticed a sharp cutoff line with these bulbs, or do they scatter light everywhere. I know this is a difficult question to answer because you can't turn on the fog-lights alone. But if you are parked on level ground facing a wall with your low beams on, you can see a pretty sharp cutoff line. When you turn on the fogs, does the light stay below the cutoff of the low beams?.
#9
You mentioned that you could have installed an alternative at twice the Lumens. Do you find that these replacements throw as much light on the ground as the OEM lights? Do you think the 1200 Lumens would have been a better choice?
Your comment about "not blinding oncoming cars" is a valid one. A bulb that scatters light everywhere could also blind the driver himself. Have you noticed a sharp cutoff line with these bulbs, or do they scatter light everywhere. I know this is a difficult question to answer because you can't turn on the fog-lights alone. But if you are parked on level ground facing a wall with your low beams on, you can see a pretty sharp cutoff line. When you turn on the fogs, does the light stay below the cutoff of the low beams?.
As to LED vs stock, I really believe it's the reflector around the bulb that determines the beam shape, and that the LEDs don't hurt that. The beams are pretty much round, with LED or stock. But, if I am correct, and they are really just decorative, then making them too bright would definitely start to get to the point where it could be disturbing, if not blinding, to other drivers. Some will blink their lights at you, just by using today's brighter LED and other cool white headlights, simply because the "seem" bright, rather than them actually being blinded.
Yeah, more questions than answers, but that's the way my Friday the 13th is going ;-)
The following users liked this post:
RDX-Rick (01-13-2017)
#10
Pro
Thanks for your comments.
I have been around cars for almost as long as yourself, and I agree that the fog-lights on modern cars serve no function other than decoration.
My last 3 vehicles (all SUVs) have been equipped with fogs, and although I did try using them during foggy conditions, I didn't notice any benefit to doing so. I have also noticed that many drivers have their fogs turned on during any and all weather conditions, once again confirming they are being used for decoration only.
Based on these conclusions, I think I will install these LEDS on my own RDX, for the purpose of appearance only. The RDX does look rather cheap (old fashioned, ugly, and a few other bad things) when the fog-lights are not the same daylight color as the head lights. It's not a big risk for $33. I also don't see any benefit to a higher output if the light pattern is as you described. A higher output would just bother oncoming drivers and most likely myself as well.
Please update this thread as you gain more experience with your new lights.
I have been around cars for almost as long as yourself, and I agree that the fog-lights on modern cars serve no function other than decoration.
My last 3 vehicles (all SUVs) have been equipped with fogs, and although I did try using them during foggy conditions, I didn't notice any benefit to doing so. I have also noticed that many drivers have their fogs turned on during any and all weather conditions, once again confirming they are being used for decoration only.
Based on these conclusions, I think I will install these LEDS on my own RDX, for the purpose of appearance only. The RDX does look rather cheap (old fashioned, ugly, and a few other bad things) when the fog-lights are not the same daylight color as the head lights. It's not a big risk for $33. I also don't see any benefit to a higher output if the light pattern is as you described. A higher output would just bother oncoming drivers and most likely myself as well.
Please update this thread as you gain more experience with your new lights.
The following users liked this post:
rraisley (01-13-2017)
#13
Pro
Yes, it was the question you raised in message #3 that I was hoping you would be able to answer after spending some time with the new lights.
#15
2021 RDX A SPEC
i changed out to h11 led fog light bulbs also... here's my setup and light output...love the pure white! while there is no real purpose to these fogs, i do find that they provide some peripheral illumination along sides.
Attachment 120321
![](http://i67.tinypic.com/k2b67t.jpg)
Attachment 120322
Attachment 120321
![](http://i67.tinypic.com/k2b67t.jpg)
Attachment 120322
#16
The Original Shawdy
The benefit to having brighter fogs is to light up the ground closer to the vehicle where the headlights aren't aimed. Makes it easier to see the lane edges in inclement weather.
#17
Direct replacement Morimoto Fogs
I replaced my halogen OEMs with the Morimoto XB Led type S. Direct replacement, same mounting screws and power socket, took about 15 minutes.
While I don't drive much at night, it's nice to know they are there.
While I don't drive much at night, it's nice to know they are there.
#18
Now, back in my rallye days, using Cibie fogs and spots, those fogs were pretty much like today's /good/ low beams: great distance, low cutoff, great side light. But these days, every fog I've seen is pretty much decorate only. But, they /are/ decorative, look cool, and certainly cooler still with the "right white".
#19
Advanced
I just installed the same LED fogs as the OP of the thread bought through amazon. Perfect match looks wise and the very easy install not to mention the low price made me a happy camper.
Done with the mods on the RDX!!!
Done with the mods on the RDX!!!
#20
Pro
Did you order from Amazon.ca or Amazon.com?. Both sites offer the same identical product, but the Canadian site ships from China, and the US site will not ship to Canada at all.
The cost at amazon.ca is $32.99 CAD and amazon.com is $32.95 USD, so the Canadian site is the better deal, but I would be willing to pay the dollar exchange rate to get them quicker.
What did you do?
#21
Advanced
Rick, I ordered from the amazon.ca site. Took 2 weeks from the date of order to arrive in Toronto. Looks like a perfect match to the LED headlights but I think the OEM halogen fogs throw more light to the sides IMHO.
The following users liked this post:
RDX-Rick (02-23-2017)
#22
Advanced
Any LED longevity issues?
I looked on amazon for the LED replacements for the halogen fog lights, and many folks were complaining about their short life. Have those that made the switch encountered premature LED light failures?
Thanks!
Thanks!
#23
I've only got 5 months on mine, but so far, so good. FYI, they are on whenever the lights are on. It's hard to believe they'd have shorter life than standard (non-LED) bulbs, which normally last years, but I guess I'll have to see.
#24
Inveterate Tinkerer
Thread Starter
#26
Hey guys! Just wanted to share my experience. Thank you so much for introducing the link! I was looking for something exactly like this - with no ballast and simple plug/play functionality. I installed them tonight along with my DRLs. The light color-matches wonderfully with my interior LEDs as well as the stock HIDs.
#27
Instructor
Thanks,
THAN
#28
Instructor
Hey guys! Just wanted to share my experience. Thank you so much for introducing the link! I was looking for something exactly like this - with no ballast and simple plug/play functionality. I installed them tonight along with my DRLs. The light color-matches wonderfully with my interior LEDs as well as the stock HIDs.
Thanks,
THAN
#29
Inveterate Tinkerer
Thread Starter
Last edited by Gadgetjq; 06-05-2017 at 10:31 AM.
#32
Inveterate Tinkerer
Thread Starter
#33
Other choices for fog lamp replacement on 2018 RDX Elite
Hello everyone. Just wondering if any owners have had a positive experience with any other white LED fog lamp replacements. I am considering getting mine changed but the ones mentioned in this thread are for $107 at the moment on Amazon Canada. Any suggestions would be
great .
#34
Inveterate Tinkerer
Thread Starter
Hello everyone. Just wondering if any owners have had a positive experience with any other white LED fog lamp replacements. I am considering getting mine changed but the ones mentioned in this thread are for $107 at the moment on Amazon Canada. Any suggestions would be
great .
Last edited by Gadgetjq; 03-04-2018 at 05:57 AM.
The following users liked this post:
hongthan (03-06-2018)
#38
Instructor
![](https://cimg5.ibsrv.net/gimg/acurazine.com-vbulletin/2000x1325/a69a846e_e123_44dc_89b9_5baa07635f25_3bc5e9952584679d85d58315dbf14bccdfc9db1d.jpeg)
![](https://cimg8.ibsrv.net/gimg/acurazine.com-vbulletin/2000x775/1dc73aaa_315d_4f12_86c9_caedf27e408f_68c5b43d4ede39c7aea0bd00faee7093f92ce8e5.jpeg)
Just changed the license plate bulbs, it is indeed very simple. Open the plastic piece from inside trunk panel first, then you can access the two bulb housings. Be careful when you work on it. Here are the pictures I took.
Last edited by hongthan; 03-06-2018 at 08:17 PM.
The following users liked this post:
jcross1231 (03-07-2018)