StreetKa's CL Type S 03 6 speed Dyno
#1
StreetKa's CL Type S 03 6 speed Dyno
so i finally went to a dyno today i was hoping to get 230-235 WHP and i was a bit surprised...
my mods are XS headers, CT Axleback, Underdrive crank pulley, Injen CAI
246 WHP and 210 TQ... =) 92k miles atm
there was 55 deg outside and ill post video and screenshots as they will send them to me tomorrow...
as for now
she was so dirty but still she made it
http://www.youtube.com/watch?v=SI-rzkRCFh4
Here's the dyno sheet
my mods are XS headers, CT Axleback, Underdrive crank pulley, Injen CAI
246 WHP and 210 TQ... =) 92k miles atm
there was 55 deg outside and ill post video and screenshots as they will send them to me tomorrow...
as for now
she was so dirty but still she made it
http://www.youtube.com/watch?v=SI-rzkRCFh4
Here's the dyno sheet
Last edited by DaInFaMMuS1; 11-03-2010 at 09:27 PM.
#7
Senior Moderator
Trending Topics
#8
Tokin up in
Join Date: Mar 2009
Location: Aurora, Co
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
#9
Whats up with RDX owners?
iTrader: (9)
I just realized you were on a hub dyno. The numbers at the wheels would be slightly lower.
Still impressive numbers though.
Still impressive numbers though.
#11
Tokin up in
Join Date: Mar 2009
Location: Aurora, Co
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
#15
Tokin up in
Join Date: Mar 2009
Location: Aurora, Co
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
[quote=friesm2000;12472090]and still made more then a modded base tl (and altitude does not matter so when it has been corrected for it )
Hahahaha... O Ya i forgot bout that lol U gotta get that 6 spd in with the Zex kit dyno
Hahahaha... O Ya i forgot bout that lol U gotta get that 6 spd in with the Zex kit dyno
#21
Tokin up in
Join Date: Mar 2009
Location: Aurora, Co
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
#28
so today i wanted to install p2r IM thermo spacer so i got around to do it and i saw this...
i was like OMFG thats alot of oil and i acutally did seafoam aprox month ago...
i cleaned the whole intake manifold took it apart (plenums as well) and used a porting kit matched and grined all the sharp edges and imprefections thats how it looks now
also i did coolant bypass mod as for thermo spacer it seems to be working very well... after a 30 min spirit drive it was pretty cool
the throtle response is crazy now... the car felt sluggish for last couple of weeks now its like day n night it sounds great car beg you to floor it vtec sounds incredible i missed it.
i was like OMFG thats alot of oil and i acutally did seafoam aprox month ago...
i cleaned the whole intake manifold took it apart (plenums as well) and used a porting kit matched and grined all the sharp edges and imprefections thats how it looks now
also i did coolant bypass mod as for thermo spacer it seems to be working very well... after a 30 min spirit drive it was pretty cool
the throtle response is crazy now... the car felt sluggish for last couple of weeks now its like day n night it sounds great car beg you to floor it vtec sounds incredible i missed it.
Last edited by StreetKA; 11-10-2010 at 11:09 PM.
#33
Whats up with RDX owners?
iTrader: (9)
Id do a catch can immediately. My intake looked like that too when I did the 3.7L manifold.
Get one of the cheap catch cans on ebay. One like this:
http://cgi.ebay.com/ebaymotors/Unive...ht_3349wt_1009
I have that one. If you get it, open it up and fill it halfway or so with medium grade steel wool. Dont stuff it in there, just have it laying there. It helps catch the oil so the vacuum created doesnt suck it back up.
Get one of the cheap catch cans on ebay. One like this:
http://cgi.ebay.com/ebaymotors/Unive...ht_3349wt_1009
I have that one. If you get it, open it up and fill it halfway or so with medium grade steel wool. Dont stuff it in there, just have it laying there. It helps catch the oil so the vacuum created doesnt suck it back up.
#34
What do you guys think about painting IM? I was thinking about VHT or ceramic coat or just powder coat. Ceramic coat i think it would be overkill but whats your guess. I dont see any other color than black that would look good under the hood of black car. I took of the engine covers and i dig how it looks now. PC NBP?
#35
Whats up with RDX owners?
iTrader: (9)
Its going to be hard to powder coat NBP. PC isnt like paint, its literally powder. Its easier going with standard colors.
PC will hold to engine bay temps. Paint may not. Ceramic coating is expensive and probably not worth it. I would ceramic coat headers though.
PC will hold to engine bay temps. Paint may not. Ceramic coating is expensive and probably not worth it. I would ceramic coat headers though.
#37
Whats up with RDX owners?
iTrader: (9)
I classify that as paint. Might not stand up to the temps.
#39
I was thinking about gunmetal too. Right now i want to take a rest after basic maintenance done on the car. I was trying to change front pads for cheapo duralast. Had a hard time puting back everything together then next day taking it apart because seized caliper. It was disaster to get the new caliper on staurday. I went yo local parts store and they told me to wait 2 hours for front right caliper. 2 hours later i came to the store to pick it up but they ordered left one i was so mad i finally called stealership and picked it up 30min later. I was in need of a car so i had to make it the same day. I could have wait two days and order a legend's calipers but i didnt want to wait
Im sor tired after running back and forth. Plan fot this week is to remove CDD also wetsand the headlight.
Im sor tired after running back and forth. Plan fot this week is to remove CDD also wetsand the headlight.
Last edited by StreetKA; 11-15-2010 at 01:33 PM.
#40
Whats up with RDX owners?
iTrader: (9)
Keep an eye on those Duralast pads. Ive seen them crumble away after a few thousand miles.