Went to Tuner Bash today and ran my car three times on a dyno for FREE
Here is a scan of the results. See my sig for mods. Oh there was an E46 M3 with exhaust and computer chip of some sort that ran ahead of me and I also have his results.
I ran once in third and twice in fourth. Enjoy the pics...





According to jtkz13, our cars have a drivetrain loss of 16.5%. So if I am getting 241.6 whp than I should have 281.4 HP.



I took lots of pics of the cars and hoes at the show... will post soon

 

no torque #'s? That's whack.


good job though

 

After it was ran I was informed that there weren't going to give me torque values b/c they couldn't get to the wire harness under the engine plastic. I am going again tomorrow for the TQ measurements and more pics of the hoes.

 

Yes, those TQ numbers are important. Let us know

 

I went back today for the TQ numbers but it was too late. I woke up too late for registration but I did win $150.00/second place in the NA 6-cylinder class right behind to you guess it... the M3 ^^^

 

Hp is just a equation of tq. Search online for the formula to equate your whp into wtq.

And 4th is the right gear to dyno in for the 6 speed. 3rd gear offers too much torque multiplication for the numbers to be 100%right and 5th is technically a overdrive, so that will skew the numbers too.

And I would say our driveline loss is 15%, but some people say 17% due to the LSD. It doesnt really matter, because without an engine dyno it's just fuzzy math. You gained atleast 20whp, which is a very decent gain for our already high output 6 banger.

Did you get a stock baseline before the mods?

 

I don't have any baseline numbers, I just used yours. It was the first time I ever had a car on a dyno.

 

congrats on the prize money!!!!

Did you get those pictures of my TL posted from the show?

 

No later than today will you receive your pictures.

 

Pix go here: http://www.acura-cl.com/forums/showt...hreadid=134326

 

the m3 probably put more down, it just couldnt get to redline. i thought a stock m3 would put down more than that.

 

All the dyno results I've seen in the past always show hp/rpm and/or tq/rpm. Not sure what good it is to show hp/mph. Seems kind of meaningless. Please clarify why there's no rpm axis.

thanks...