Update on Prototype Racing equal-length headers!
Thread Starter
Old timer
Joined: Dec 2000
Posts: 9,224
Likes: 1
From: .
Pro
Joined: May 2002
Posts: 545
Likes: 0
From: Canada
Re: Update on Prototype Racing equal-length headers!
I'd love to see the dyno's on them.
go like hell
Joined: Jul 2001
Posts: 5,154
Likes: 1
From: Anna,OH(home of the honda/acura motors)
well if you guys click over to the V-6 Accord header page it posted a Dyno of a comparasion between Comptech headers and Prototype Headers.
here's what I found out from the Dyno on the V-6 Accord Comptech Headers vs Prototype
if you want more "bottom end" torque/HP it's a given go with Prototype(@ 4300 and 4400 RPMs is about it's "sweet spot)
if you want more "top end" as far as redlineing or your hitting your rev limiter a lot go with Comptechs cause at 6000 RPMs and above the Comptechs are a little better.
the way I look at it their both good headers but if i had a V-6 Accord or CL I'd go with the Prototypes because rarely do I get up in the 6 grand RPM range (and I have a 4-cylinder which revs a little higher than you guys)
here's what I found out from the Dyno on the V-6 Accord Comptech Headers vs Prototype
if you want more "bottom end" torque/HP it's a given go with Prototype(@ 4300 and 4400 RPMs is about it's "sweet spot)
if you want more "top end" as far as redlineing or your hitting your rev limiter a lot go with Comptechs cause at 6000 RPMs and above the Comptechs are a little better.
the way I look at it their both good headers but if i had a V-6 Accord or CL I'd go with the Prototypes because rarely do I get up in the 6 grand RPM range (and I have a 4-cylinder which revs a little higher than you guys)
Three Wheelin'
Joined: May 2001
Posts: 1,920
Likes: 0
From: BOCA RATON, FL.
Re: Update on Prototype Racing equal-length headers!
kman
Instructor
Joined: Aug 2001
Posts: 229
Likes: 0
From: So. Cal.
Re: Re: Update on Prototype Racing equal-length headers!
Originally posted by kman156
that header won't be out for some time! the gentleman who was originally involved in designing comptechs v-6 header , designed this header as well! he sold the rights to opak racing! opak racing is currently looking to work with a manufacturer to mass produce the prototype header. as of yet , that has not happened. just so you don't hold your breath! kman
that header won't be out for some time! the gentleman who was originally involved in designing comptechs v-6 header , designed this header as well! he sold the rights to opak racing! opak racing is currently looking to work with a manufacturer to mass produce the prototype header. as of yet , that has not happened. just so you don't hold your breath!
kman
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
Jul 16, 2017 07:33 AM
CL-S progression 01
Car Parts for Sale
65
Jan 26, 2016 04:15 PM
