Shop that puts stock springs back in. DC,NOVA area??
#1
Instructor
Thread Starter
Join Date: Mar 2002
Location: NOVA
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Shop that puts stock springs back in. DC,NOVA area??
I just called Quality Tire in Woodbridge where they installed my H&R springs, and they quoted me $300 for the install to put my stock spring back in. They charged me $125 to put the H&r's in. I think that price is rediculous to put stockers back in
So does anyone in the DC metro area know of a that will put my stock springs in that will be around $150 price range?? Thanks alot!
So does anyone in the DC metro area know of a that will put my stock springs in that will be around $150 price range?? Thanks alot!
#2
Former Sponsor
iTrader: (1)
Sorry I don't live in that area, but you should explain to them that they're not doing any more work than before. The only thing they may have to do is compress the stock spring more in order to mount the rubber strut base. So if anything maybe charge another $25, but even that is not necessary.
#6
Instructor
Thread Starter
Join Date: Mar 2002
Location: NOVA
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
just called vertex, what are people smoking theses days. This guy was like yeah its a 5 hour install. BULSHIT, tops an 2 hours with the right equipment. and they wanted $300. WTF
#7
Check out this thread in clubrsx, dc metro forum DC Area Mods . You should PM I-MOD on there and see if he could help you out. I think he said awhile back when I inquired, CL/TLs wouldn't be a problem, but check with him. He's done two suspensions on my RSX and does great work.
Trending Topics
#8
COME AT ME BRO!
i did mine my self it was easy.. u just need a spring compressor. if you can find one i can help u put them on i got air tools at my crib
#9
COME AT ME BRO!
Originally Posted by Cl2TLS
just called vertex, what are people smoking theses days. This guy was like yeah its a 5 hour install. BULSHIT, tops an 2 hours with the right equipment. and they wanted $300. WTF
#11
Three Wheelin'
iTrader: (1)
Springs
Take out the back seats, are you nuts?
Pop the pillars on the rear window, pop the carpet pins behind the backseats, and that rear lid come off without tearing anything up.
(YES I'VE DONE THIS, TWICE NOW)
Take time, be patient. Might put a fitted sheet over your leather, climbing in and out of there all dirty can make a mess.
You can drop / put factory stuff back on that car in under 4 hours with an impact wrench, floor jack, air rachet, and $50 spring compressor clamps.
Seriously it's like 3 bolts per wheel, with a few extra nuts in the front to drop the shock towers off the strut bar.
Pop the pillars on the rear window, pop the carpet pins behind the backseats, and that rear lid come off without tearing anything up.
(YES I'VE DONE THIS, TWICE NOW)
Take time, be patient. Might put a fitted sheet over your leather, climbing in and out of there all dirty can make a mess.
You can drop / put factory stuff back on that car in under 4 hours with an impact wrench, floor jack, air rachet, and $50 spring compressor clamps.
Seriously it's like 3 bolts per wheel, with a few extra nuts in the front to drop the shock towers off the strut bar.
#12
misanthropist
Join Date: Aug 2003
Location: Tyson's Corner
Age: 43
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
i've got a spring compressor i am renting from autozone, find a local one and they will rent it to you and refund the whole cost... i just need to find some time or some air tools to put mine back to stock...
getting too old for the rough ride :killer:
getting too old for the rough ride :killer:
#14
COME AT ME BRO!
i got air tools and im in chantilly. and u do wanna take the back seat out so you dont worry about fuckin it up its not hard to take the seat out
#15
Spectacular Aroma About
Join Date: May 2003
Location: Ohio
Age: 56
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pseudomaniac
Take out the back seats, are you nuts?
Pop the pillars on the rear window, pop the carpet pins behind the backseats, and that rear lid come off without tearing anything up.
(YES I'VE DONE THIS, TWICE NOW)
Pop the pillars on the rear window, pop the carpet pins behind the backseats, and that rear lid come off without tearing anything up.
(YES I'VE DONE THIS, TWICE NOW)
#16
misanthropist
Join Date: Aug 2003
Location: Tyson's Corner
Age: 43
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
BIG Thanks to Evilone for helping Cl2TLS and I out changing our suspensions back to stock this past weekend, I forgot how much I love floating on the no handling stock suspension!
+points
+points
#17
COME AT ME BRO!
no prob nate and sam. it was my pleasure but my legs are still swore from that day. i could hardly walk on sunday. my legs havent had a work out like that in a while.,
#18
Instructor
Thread Starter
Join Date: Mar 2002
Location: NOVA
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Whats up guys, Much thanks goes out to Ryan for letting Mason and I use his air tools!!! Nice to meet you guys, thank you both for helping a fellow Tl'r out. I was sore as hell on sunday, but it was nice riding home in the 4X4 air ride, ha.
#19
Liquid Ice
Originally Posted by evilone
i got air tools and im in chantilly. and u do wanna take the back seat out so you dont worry about fuckin it up its not hard to take the seat out
Wanna help me out this weekend? ...
#20
Senior Moderator
Originally Posted by 03typeS6spd
getting too old for the rough ride :killer:
I'm thinking about finally modding my stock 6spd by adding HR oem sports...
#21
COME AT ME BRO!
Originally Posted by GreenMonster
Too old
I'm thinking about finally modding my stock 6spd by adding HR oem sports...
I'm thinking about finally modding my stock 6spd by adding HR oem sports...
Thread
Thread Starter
Forum
Replies
Last Post