RJ Sport Design Lip Kit Group Buy
#84
I'm new to this forum and my message box says full so please email me for more info on this group buy, Ron. Thanks. Intlms@gmail.com.
#85
Racer
Count me in...
We aren't doing the splitter kit, but we are doing the 2nd Gen TL kit.
If anybody wants to tackle the project themselves, hacking the RJ splitter kit might be easier.
I am however considering making a splitter kit for the RJ kit, just a flat piece of ABS 1" tall that will bolt onto the RJ kit from underneath for an extra level of awesomeness!
Let me know if these guys listed below are down, I'll send opms shortly, but I think this is a go even if 2 people drop out.
1. PDGCLS01
2. AustinTaper
3. Paclark01
4. cbiscut05
5. intlms
6. new-york-cl
7. nf3d0149ab
If anybody wants to tackle the project themselves, hacking the RJ splitter kit might be easier.
I am however considering making a splitter kit for the RJ kit, just a flat piece of ABS 1" tall that will bolt onto the RJ kit from underneath for an extra level of awesomeness!
Let me know if these guys listed below are down, I'll send opms shortly, but I think this is a go even if 2 people drop out.
1. PDGCLS01
2. AustinTaper
3. Paclark01
4. cbiscut05
5. intlms
6. new-york-cl
7. nf3d0149ab
#88
Former Sponsor
iTrader: (1)
Ok, so as of now, we have a definite yes from:
1. new-york-cl
2. AustinTaper
3. Paclark01
4. intlms
I just need these guys to confirm as well with deposits, and we are going to schedule the kits to be built.
1. PDGCLS01
2. cbiscut05
3. nf3d0149ab
I also have someone not on the boards who is in as well.
1. new-york-cl
2. AustinTaper
3. Paclark01
4. intlms
I just need these guys to confirm as well with deposits, and we are going to schedule the kits to be built.
1. PDGCLS01
2. cbiscut05
3. nf3d0149ab
I also have someone not on the boards who is in as well.
#90
Instructor
Sorry guys but I'm going to have to cancel. Ive looked at my finances and it isnt going to add up, even with my $2000 school check next month. Its time I took charge of my finances and spending habits and started planning for the future so the car is going to go on the back burner. If we could have gotten the group together sooner before the new year I would have done it but I have already started paying off some debt. If anything changed I will let you know but as of right now I can't.
#93
Former Sponsor
iTrader: (1)
We have all our guys working on the TL kit as we speak, the new one for the 4th gen. SO I had them schedule from now for the workers to get onto the CL kit by mid next week. I'll post dates and progress as soon as they start on Wednesday. Already got a few deposits, making the invoices now. Anybody else want to get in with the huge discount, let me know!
#100
Former Sponsor
iTrader: (1)
Ok, everybody has been sent a notification, just ned the deposits and we are good to go for production. PayPal is rondyvous1@aol.com or call in with cc over the phone. already received 2 deposits, waiting on the rest. Thanks guys, you will really enjoy the kit and the simplicity it offers, how it is not so busy and fits the CL's original design so well.
#101
How soon would you be thinking about another production? I just bought the car on Monday and put a lot of money toward misc maintenance things. I would need another month or so before proceeding with body work.
#103
#105
Former Sponsor
iTrader: (1)
$270 front lip GB special price
$250 rear lip GB special price
$300 side skirt pair GB special price
#111
03 acura cl type s
iTrader: (1)
We aren't doing the splitter kit, but we are doing the 2nd Gen TL kit.
If anybody wants to tackle the project themselves, hacking the RJ splitter kit might be easier.
I am however considering making a splitter kit for the RJ kit, just a flat piece of ABS 1" tall that will bolt onto the RJ kit from underneath for an extra level of awesomeness!
Let me know if these guys listed below are down, I'll send opms shortly, but I think this is a go even if 2 people drop out.
1. PDGCLS01
2. AustinTaper
3. Paclark01
4. cbiscut05
5. intlms
6. new-york-cl
7. nf3d0149ab
If anybody wants to tackle the project themselves, hacking the RJ splitter kit might be easier.
I am however considering making a splitter kit for the RJ kit, just a flat piece of ABS 1" tall that will bolt onto the RJ kit from underneath for an extra level of awesomeness!
Let me know if these guys listed below are down, I'll send opms shortly, but I think this is a go even if 2 people drop out.
1. PDGCLS01
2. AustinTaper
3. Paclark01
4. cbiscut05
5. intlms
6. new-york-cl
7. nf3d0149ab
#113
Racer
Side Note: Dig the LED fogs. I want those... What process did you go through and who is the parts vendor.
#115
Former Sponsor
iTrader: (1)
Sorry, the bottom piece is not somethign we have, I just edited that. however, it is a simple add on piece that can be custom made I presume. I will look into the weather stripping options. And as far as the LED fog lights, I have a set on my car, and they will be sold from our online store. THey retail for $85 for the pair, and are very high output and quality fixtures. Here's a preview: