Rajca's Project CL-S6 Car
#1
Rajca's Project CL-S6 Car
so, instead of making my tl-s in to a track car, the CL-S6 took over.
this is what i have to start with. drives and runs great
payed $2405 for the car, auction fees, dealer fees, and towing
needs: front and rear bumper, left tail light, both headlamps, grill, hood, paint
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Polyurethane filled mounts-
AND whatever else i forgot, any suggestions are appreciated
this is what i have to start with. drives and runs great
payed $2405 for the car, auction fees, dealer fees, and towing
needs: front and rear bumper, left tail light, both headlamps, grill, hood, paint
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Polyurethane filled mounts-
AND whatever else i forgot, any suggestions are appreciated
Last edited by Rajca; 04-16-2009 at 10:34 PM.
Trending Topics
#14
down the road when my schools payed off and i have money
UPDATE LIST
Rajca's Project CL-S6 Car
so, instead of making my tl-s in to a track car, the CL-S6 took over.
this is what i have to start with. drives and runs great
payed $2405 for the car, auction fees, dealer fees, and towing
needs: front and rear bumper, left tail light, both headlamps, grill, hood, paint
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Polyurethane filled mounts-
-Intake manifold spacer-have
-TB spacer-have
AND whatever else i forgot, any suggestions are appreciated
UPDATE LIST
Rajca's Project CL-S6 Car
so, instead of making my tl-s in to a track car, the CL-S6 took over.
this is what i have to start with. drives and runs great
payed $2405 for the car, auction fees, dealer fees, and towing
needs: front and rear bumper, left tail light, both headlamps, grill, hood, paint
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Polyurethane filled mounts-
-Intake manifold spacer-have
-TB spacer-have
AND whatever else i forgot, any suggestions are appreciated
#15
Three Wheelin'
iTrader: (3)
Join Date: Sep 2008
Location: Chicagoland
Age: 34
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
..............did not expect that
Damn thats a :crap: load
too bad i'll be missing the meet
down the road when my schools payed off and i have money
UPDATE LIST
Rajca's Project CL-S6 Car
so, instead of making my tl-s in to a track car, the CL-S6 took over.
this is what i have to start with. drives and runs great
payed $2405 for the car, auction fees, dealer fees, and towing
needs: front and rear bumper, left tail light, both headlamps, grill, hood, paint
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Polyurethane filled mounts-
-Intake manifold spacer-have
-TB spacer-have
AND whatever else i forgot, any suggestions are appreciated
UPDATE LIST
Rajca's Project CL-S6 Car
so, instead of making my tl-s in to a track car, the CL-S6 took over.
this is what i have to start with. drives and runs great
payed $2405 for the car, auction fees, dealer fees, and towing
needs: front and rear bumper, left tail light, both headlamps, grill, hood, paint
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Polyurethane filled mounts-
-Intake manifold spacer-have
-TB spacer-have
AND whatever else i forgot, any suggestions are appreciated
too bad i'll be missing the meet
#17
UPDATE
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Intake manifold spacer-have
-Throttle body spacer]-have
-NRG engine torque dampner-have
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Intake manifold spacer-have
-Throttle body spacer]-have
-NRG engine torque dampner-have
#18
UPDATE
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Intake manifold spacer-have
-Throttle body spacer]-have
-NRG engine torque dampener-have
-UR light weight crank pulley (oe size)- have
repair list
to do/get list:
-CF hood-
-Front bumper-
-Rear bumper-
-Rear left tail light-
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-PSPEC Short shifter-
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Intake manifold spacer-have
-Throttle body spacer]-have
-NRG engine torque dampener-have
-UR light weight crank pulley (oe size)- have
#22
Advanced
RAJCA, you waste no time!! are you going to be working on it this thursday or friday>>?? its gonna be nice out and i am going to be up in Niles. Maybe, if its alright with you, i can stop by and have a glance at the project. As for the turbo.. what whp are you lookig to get??
#32
i went through ebay bc the hood was $25 cheaper and it was a well know seller with all positive feedback and one neutral. i didnt pay tax, but ive read that if their selling the product in your home state u have to pay tax.
i will not remover anything as of now bc im gonna drive it, dyno it stock and take it to the track stock to see what i have to start with. when it turns into my fully track car ill take out most of the luxury items.
i will not remover anything as of now bc im gonna drive it, dyno it stock and take it to the track stock to see what i have to start with. when it turns into my fully track car ill take out most of the luxury items.
#34
Uses turn signals in my
i went through ebay bc the hood was $25 cheaper and it was a well know seller with all positive feedback and one neutral. i didnt pay tax, but ive read that if their selling the product in your home state u have to pay tax.
i will not remover anything as of now bc im gonna drive it, dyno it stock and take it to the track stock to see what i have to start with. when it turns into my fully track car ill take out most of the luxury items.
i will not remover anything as of now bc im gonna drive it, dyno it stock and take it to the track stock to see what i have to start with. when it turns into my fully track car ill take out most of the luxury items.
#36
UPDATE
repair list
to do/get list:
-CF hood- being shipped
-Front bumper-
-Rear bumper-
-Rear left tail light-being shipped
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-Neuspeed short shifter kit-Have
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Intake manifold spacer-have
-Throttle body spacer]-have
-NRG engine torque dampener-have
-UR light weight crank pulley (oe size)- have
repair list
to do/get list:
-CF hood- being shipped
-Front bumper-
-Rear bumper-
-Rear left tail light-being shipped
-Front headlights-4-16-09 have
-Grill-
-Paint-
-Left muffler-
-Bulk head cover-4-15-09 have
MOD list
-CF trunk-
-Clutch dampener removed-
-SS clutch lines-
-Neuspeed short shifter kit-Have
-SS Brake lines-Have
-Legend Dual Piston Calipers-
-Dimpled/slotted ebc front rotors-installed
-New Hawk performance street pads-
-MOGG End links-installed
-3rd gen tl Progress rear sway bar- Installed
-Neuspeed strut bar-Installed
-Tein basic coil overs-Installed
-Tint, 10% rear, 20% front-
-My custom turbo kit-
-Cusco under brace-
-Light weight 17" rims-
-Gauge pillar-
-GM Friction Modified Syncromesh MTF-
-Dot 5 Brake Fluid-
-Flush and Bleed clutch line-
-Flush and refill coolant-
-Intake manifold spacer-have
-Throttle body spacer]-have
-NRG engine torque dampener-have
-UR light weight crank pulley (oe size)- have
#37
TellinItLikeItIsSince1/06
finally, someone's bringing some life back in the 2nd CL boards!!! this is an amazing project man, best of luck!
and glad your local, hopefully one day down the road, at a meet or something, Ill see this beast in person.
and glad your local, hopefully one day down the road, at a meet or something, Ill see this beast in person.