It's been quite some time since I've done any mods to the car, so I am probably going to take the plunge and pick up a Comptech S/C. I found someone selling a used kit in the local area, and I just wanted to confirm that the kit had everything 'inclusive.' Hearing all this news about Comptech closing shop, I just want to make sure I am picking up a complete S/C kit.

Below is a list of what he told me that the S/C kit came with:
-Manifold
-Map sensor
-Main pulley
-Intermediate Shaft
-Idler
-Belt
-Filter assembly
-Cold air isolation divider; and
-Mounting bracket for the intermediate shaft.

Does this list sound complete? Can anyone with a CT S/C confirm this?

Thanks in advance,

Brian

 

What about the ESM?
You also need the Comptech battery tray and coolant bottle, relocation bracket for the power steering bottle and alternator mounting bracket.

 

Also I didn't see the fuel pump or fuel pressure regulator on that list either.

 

hes, right, your also gonna need the newer smaller battery so it could fit...

 

He could relocate the battery elsewhere...ie trunk.

 

Don't forget the silicone upper radiator hose, it's a custom piece (damn, I better buy a spare before they go away!). Also the little spacers and bolts for changing the cooling fan mount.

With the new kit they give you a modified fan shroud, but you can easily modify your own with a moto tool or spiral saw.

 

hmm, seems like i totally missed some of the obvious ones that mclaren pointed out. thanks for the help.

if anyone else can chime in, that'd be greatly appreciated. thx

 

i have the list if you want it... i think...
wahts your email?

 

YGPM.

 

haha, isnt there a complete list on comptechs website?

 

you know what, I think there was... but the CT site was updated recently and they actually took down all the details re: the 5AT S/C, which is no biggie, since the CLS6 S/C is essentially the same parts.

Not a specific list, which essentially is what I'm looking for.

 

The kit comes with a specific check off sheet complete with nuts, bolts, hoses,brackets, etc.

 

YGPM- list sent.

 

if you dint get the answers from the part lists, let me know. from the lits you gave it seems like you are missing quite a few major parts, but also it looks like you just typed what you remembered. the 6spd kit is different in that there is a different elbow which is not included. ct used to sell it for like 120ish, and you need it for the AT. I have one I will sell pretty cheap...LMK, also if you have any other questions. I also have a modified rad. fan shroud as well from a type S kit from CT.

 

can i get that list aswell. viper62382@aol.com

 

Here's a PDF of my checkoff list from my 6 speed kit.

Right click the like below and "Save Target As"

http://photos.imageevent.com/allout/..._Checklist.pdf