question for allmotor
umm... 
first off if you're addressing allmotor_2000 he isn't allmotor, he has a turbo setup.
but the only way to get into 13's without FI would be to change the block to 3.5 or even 3.7L. TypeR has a 3.5 block setup with a 5AT and he runs around 13.3 i believe.
do a search

first off if you're addressing allmotor_2000 he isn't allmotor, he has a turbo setup.
but the only way to get into 13's without FI would be to change the block to 3.5 or even 3.7L. TypeR has a 3.5 block setup with a 5AT and he runs around 13.3 i believe.
do a search
Originally Posted by rezurex
umm... 
first off if you're addressing allmotor_2000 he isn't allmotor, he has a turbo setup.
but the only way to get into 13's without FI would be to change the block to 3.5 or even 3.7L. TypeR has a 3.5 block setup with a 5AT and he runs around 13.3 i believe.
do a search

first off if you're addressing allmotor_2000 he isn't allmotor, he has a turbo setup.
but the only way to get into 13's without FI would be to change the block to 3.5 or even 3.7L. TypeR has a 3.5 block setup with a 5AT and he runs around 13.3 i believe.
do a search
yea allmotor had some engine mods, i think TB and intake manifold im not sure, and he did run 13's with the setup. keep in mind that he has a 6spd plus his modding experience is second to none as well as his driving ability
i agree that I/H/E and slicks will allow 6spd to run 13's... but unfortunately no one has tried, or if they did i never heard about it
just like a s/c + HBP 6spd should run 12's but.. i've never seen slips.
i agree that I/H/E and slicks will allow 6spd to run 13's... but unfortunately no one has tried, or if they did i never heard about it
just like a s/c + HBP 6spd should run 12's but.. i've never seen slips.
do u kno where i can get a throttle body and intake manifold for my car i've been searching the whole planet for these mods and came up empty handed, any info on these would be great, or if u talk to allmotor u can ask him or sumthin...also list a price range and where i can get these parts if possible...thanx
Trending Topics
Originally Posted by beastman18
do u kno where i can get a throttle body and intake manifold for my car
Your first mod should be a cold air intake such as the AEM CAI or Comptech Icebox, and then a pair of headers. Then you go from there. Good luck!
I would do Cold Air Intake, Headers, Lightweight Crank Pulley, the Mugan Cooling mods and the Thermoblok Spacers and Lightweight Wheels with Drag Radials or street tires at 24 lbs. for the fronts. Empty the car of everything and go on a cool dry day if possible. Have very little gas in the tank too.
Originally Posted by 03 CL TypeS
Do a search on here for: "thermoblock"
Your first mod should be a cold air intake such as the AEM CAI or Comptech Icebox, and then a pair of headers. Then you go from there. Good luck!
Your first mod should be a cold air intake such as the AEM CAI or Comptech Icebox, and then a pair of headers. Then you go from there. Good luck!
http://www.acura-cl.com/forums/showt...9&page=2&pp=25
Ruf
Originally Posted by rezurex
umm... 
first off if you're addressing allmotor_2000 he isn't allmotor, he has a turbo setup.
but the only way to get into 13's without FI would be to change the block to 3.5 or even 3.7L. TypeR has a 3.5 block setup with a 5AT and he runs around 13.3 i believe.
do a search

first off if you're addressing allmotor_2000 he isn't allmotor, he has a turbo setup.
but the only way to get into 13's without FI would be to change the block to 3.5 or even 3.7L. TypeR has a 3.5 block setup with a 5AT and he runs around 13.3 i believe.
do a search
actually allmotor_2000 did run in the 13's with an allmotor setup.
http://www.acura-cl.com/forums/showthread.php?t=122958
Thread
Thread Starter
Forum
Replies
Last Post
navtool.com
5G TLX Audio, Bluetooth, Electronics & Navigation
31
Nov 16, 2015 08:30 PM
DerrickW
3G TL Performance Parts & Modifications
9
Nov 15, 2015 05:52 PM


