did some research 4 abt three days, it seems powerslots do not make cross drilled rotors, i believe the drilled one are from a 3rd party.
and althought they are good rotors, never notin bad abt them, so i have decided to go a step up and try the cyro treated powerslot rotors

that shud take care of the warping issues, according to my research

 

or u could just freeze ur stock or aftermarket rotors @ http://www.frozenrotors.com/
they last as much as 8x longer after been treated

 

I have the stoptech slotted rotors, and I'm a big fan.

 

I got my powerslots a week ago they are going to be put on Friday along w/ my rear tie rod and mugen mods

 

I've had my Rotora Slotted on for about 7 months and no problems.

 

TIE ROD , WHERE DO I GET THAT FROM.................... U MEAN SWAY BAR OR DID U MEAN REAR TIE ROD REAR

 

I have Comptech Sway Bars.... I purchased a Rear Tie Rod from ebay and getting it installed Friday hopefully w. my mugen mods and rotors.. I've been running into time problems... but it will be on this Friday Deff.

 

who made the rear tie rod u purchased from ebay..............................

 

just search for 98-02 Accord V6 lower tie bar

I got it installed today... it didnt make much of a difference... but for 25$ i didnt miss out on anything, but it makes your car look alot better...