A-Pillar Gauge Mount
#41
Originally posted by mantis23
I'm at least gonna need one for fuel pressure. Don't know what else I'd care to monitor with an N20 setup. I'm sure I could think of somethin'.
I'm at least gonna need one for fuel pressure. Don't know what else I'd care to monitor with an N20 setup. I'm sure I could think of somethin'.
Remote Nitrous Pressure Gauge...silly
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Its somewhat new, hit up the NX site.
Juker008
#43
Suzuka Master
Join Date: Apr 2002
Location: Pittsburgh, PA
Age: 48
Posts: 9,940
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ModAddict
I just picked up the Autometer #5763 Phantom Fuel Press, 0-100 psi for $182.99 from Lane Automotive. I chose #5776 Electric Boost, 30"-15psi boost gauge. Look at page 60 http://www.autometer.com/hp/ and check out #4376. It is electronic, ($169), but it will give you the smaller range, full sweep, for better resolution, 30"-15psi.
I just picked up the Autometer #5763 Phantom Fuel Press, 0-100 psi for $182.99 from Lane Automotive. I chose #5776 Electric Boost, 30"-15psi boost gauge. Look at page 60 http://www.autometer.com/hp/ and check out #4376. It is electronic, ($169), but it will give you the smaller range, full sweep, for better resolution, 30"-15psi.
182.99 and 169.99.
Lane automotive - 1-800-772-5266
I grabbed the last 5776 they had... and they only charge UPS shipping, no handling fees... total was 357.98
I tried summit racing and they were 27.65 more for the same thing + they charge 7.99 for Handling. So go figure...
Thanks Brad and Steve.
Smitty
P.S. Brad clean out your damn PM box and e-mail me at CJSmith1503@aol.com
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#44
PACDAT
Join Date: Sep 2001
Location: mississauga, canada
Age: 45
Posts: 849
Likes: 0
Received 0 Likes
on
0 Posts
The lunar series gauges wont last as long as the regular ultra lite or comp series. especially if you turn the brightness level at the maximum. This info is from Autometers instructions.
#45
Three Wheelin'
Join Date: Feb 2003
Location: Grand Rapids, Michigan
Posts: 1,796
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jucee187
The lunar series gauges wont last as long as the regular ultra lite or comp series. especially if you turn the brightness level at the maximum. This info is from Autometers instructions.
The lunar series gauges wont last as long as the regular ultra lite or comp series. especially if you turn the brightness level at the maximum. This info is from Autometers instructions.
![Dunno](https://acurazine.com/forums/images/smilies/dunno.gif)
#46
Three Wheelin'
Join Date: Feb 2003
Location: Grand Rapids, Michigan
Posts: 1,796
Likes: 0
Received 0 Likes
on
0 Posts
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#48
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Interesting you ask as I was about to post on this matter.
They are evaluating the unit, received last week, and will have a price at the first of next week. At which point they will add a pre-order form on their website.
I'll update the thread when this is available.
They are evaluating the unit, received last week, and will have a price at the first of next week. At which point they will add a pre-order form on their website.
I'll update the thread when this is available.
#50
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ST2000
i'm in for the dual, i need gauges to measure ass temperatures on front seats.
i'm in for the dual, i need gauges to measure ass temperatures on front seats.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#52
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Here are the details:
Unpainted Price: $39.99
Painted (Ebony or Parchment): $47.98
US Shipping: +$5.99
Canadian Shipping: +$10.99 (Plus about Three Weeks Delivery)
Twenty pre-orders are required to begin manufacturing the trim piece. Once twenty orders are received they will begin the production of the mold and expect a shipping date of about eight to ten weeks after this point.
To place your pre-order please contact Lotek Directly, by email, phone or mail. Also, email me so I can keep track of the numbers to keep all parties informed of the count: scalbert@flwse.com
Here is the list I have so far. I know I missed a few but I do still feel we are short:
Username - Forum
scalbert - CL
Smitty - CL
CT3.2 - CL
ModAddict - CL
allmotor_2000 - CL
lou - CL
duy - CL
MtBikR - CL
schoeny14 - CL
mantis23 - CL
maevonee - CL
Juker008 - CL
ST2000 - CL
TLlikeWHOA - TL
TopGum - TL
badazzTL - TL
2001TL4KCdude – TL
Unpainted Price: $39.99
Painted (Ebony or Parchment): $47.98
US Shipping: +$5.99
Canadian Shipping: +$10.99 (Plus about Three Weeks Delivery)
Twenty pre-orders are required to begin manufacturing the trim piece. Once twenty orders are received they will begin the production of the mold and expect a shipping date of about eight to ten weeks after this point.
To place your pre-order please contact Lotek Directly, by email, phone or mail. Also, email me so I can keep track of the numbers to keep all parties informed of the count: scalbert@flwse.com
Here is the list I have so far. I know I missed a few but I do still feel we are short:
Username - Forum
scalbert - CL
Smitty - CL
CT3.2 - CL
ModAddict - CL
allmotor_2000 - CL
lou - CL
duy - CL
MtBikR - CL
schoeny14 - CL
mantis23 - CL
maevonee - CL
Juker008 - CL
ST2000 - CL
TLlikeWHOA - TL
TopGum - TL
badazzTL - TL
2001TL4KCdude – TL
#55
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by CT3.2
Can you post pictures again. And what did the measure?
Can you post pictures again. And what did the measure?
![](http://www.gaugepods.com/nsx1.jpg)
![](http://www.gaugepods.com/nsx2.jpg)
#56
steve
Im still in just one question is the painted piece exact color as the ebony in our cars...Im a bit critical about this...or should I just get it unpainted????
I would rather they paint it for me but just dont know how close the color will be...when I was doing the face plate I found it hard to match the color....reason why Im asking???
Thanks
Lou
Im still in just one question is the painted piece exact color as the ebony in our cars...Im a bit critical about this...or should I just get it unpainted????
I would rather they paint it for me but just dont know how close the color will be...when I was doing the face plate I found it hard to match the color....reason why Im asking???
Thanks
Lou
#58
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ModAddict
Will it fit the TL-S?
Will it fit the TL-S?
#59
Three Wheelin'
Join Date: Feb 2003
Location: Grand Rapids, Michigan
Posts: 1,796
Likes: 0
Received 0 Likes
on
0 Posts
I guess I could order a stock CL pasenger side to match,....or just paint it gray,.....I'll figure it out and call them in the next day or two and place a pre-order.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#60
Dromaeosaurs/Velociraptor
Join Date: Oct 2001
Location: Leander, TX
Age: 46
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
So if I understand this correctly, we first say we are in for the dual pillar then say what we want to measure and thats what gets shipped or is it all the same guages for everyone and they measure different things?
I'm not to up and up on the guages thing...bare with me.
I'm not to up and up on the guages thing...bare with me.
Originally posted by scalbert
Boost (for blown vehicles), Oil Pressure, Oil Temperature, Transmission Oil Temperature, Voltage, Fuel Pressure, Exhaust Gas Temperature, etc. There are a miriad of parameters to measure, it just depends on the individuals needs.
Yes, they would be available in both parchment and ebony interior color matches.
Boost (for blown vehicles), Oil Pressure, Oil Temperature, Transmission Oil Temperature, Voltage, Fuel Pressure, Exhaust Gas Temperature, etc. There are a miriad of parameters to measure, it just depends on the individuals needs.
Yes, they would be available in both parchment and ebony interior color matches.
#61
Safety Car
Join Date: Jun 2002
Location: Honolulu, Hawaii
Age: 48
Posts: 3,992
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RaptorCLS
So if I understand this correctly, we first say we are in for the dual pillar then say what we want to measure and thats what gets shipped or is it all the same guages for everyone and they measure different things?
I'm not to up and up on the guages thing...bare with me.
So if I understand this correctly, we first say we are in for the dual pillar then say what we want to measure and thats what gets shipped or is it all the same guages for everyone and they measure different things?
I'm not to up and up on the guages thing...bare with me.
#63
Dromaeosaurs/Velociraptor
Join Date: Oct 2001
Location: Leander, TX
Age: 46
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bullaculla
Dude, its just the housing. no gauges. just a plastic molded piece to hold them. You put in whatever gauge you choose.
Dude, its just the housing. no gauges. just a plastic molded piece to hold them. You put in whatever gauge you choose.
Dude, I didnt realize that .
![Chuckle](https://acurazine.com/forums/images/smilies/chuckle.gif)
#64
Banned
Join Date: Jul 2003
Location: Oakland California
Age: 45
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Hey, just bought my 2003 cls 2 weeks ago and dropped it already. i'm down to put in guages so pods sound nice! email me back for the group discount and when it will be ready.
#65
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Here are the ordering details: Send either a check or call or fax in your Credit Card information. Also be sure to specify Ebony or Parchment color.
US Total Price: $53.97 USD
CA Total Price: $58.97 USD
Lotek, Inc.
715 - C2 East Geer Street
Durham, NC 27701
(919) 687-2762
FAX (919) 680-6161
US Total Price: $53.97 USD
CA Total Price: $58.97 USD
Lotek, Inc.
715 - C2 East Geer Street
Durham, NC 27701
(919) 687-2762
FAX (919) 680-6161
#67
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Ebony is the the listing for the gray color although it isn't accurate. The trim piece is grey but the interior is Ebony. So we have been calling it Ebony, even though the actually color of the piece is not, to match the factoy interior color definition.
#71
Well I called today and tried to speak with Lyle, unfortunatly he is out of town for 2 weeks, vacation. Although I spoke with someone else who knew their shit. I asked them about a 3 or 4 gauge pillar pod. He said as long as I get at least 30 people for the 3 gauge. As for the 4 gauge, he said that they would not do it because the 4 gauge is too far out there. I have seen 4 gauge pods and as long as u cram the 1st lowest gauge as far down the pillar the 1st 3 are very visible, as for the 4th it should only be a gauge that doesn't require constant monitouring; i.e. nitrous pressure gauge.
So if others would want a 3 gauge the option is available, but be aware of what u would be getting urself into. A dual gauge pod give 100% visibility w/o having to turn ur head. A three gauge may require very little turning of the head but mostly u would need time to focus, because the 3rd gauge is closer to u.
Unfortunatly this is something that u can't get the best of both worlds. U would have to sacrifice visibility and comfort for aditional gauges.
Juker008
So if others would want a 3 gauge the option is available, but be aware of what u would be getting urself into. A dual gauge pod give 100% visibility w/o having to turn ur head. A three gauge may require very little turning of the head but mostly u would need time to focus, because the 3rd gauge is closer to u.
Unfortunatly this is something that u can't get the best of both worlds. U would have to sacrifice visibility and comfort for aditional gauges.
Juker008
#73
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Juker008
I asked them about a 3 or 4 gauge pillar pod. He said as long as I get at least 30 people for the 3 gauge. As for the 4 gauge, he said that they would not do it because the 4 gauge is too far out there.
I asked them about a 3 or 4 gauge pillar pod. He said as long as I get at least 30 people for the 3 gauge. As for the 4 gauge, he said that they would not do it because the 4 gauge is too far out there.
#74
Suzuka Master
Join Date: Apr 2002
Location: Pittsburgh, PA
Age: 48
Posts: 9,940
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by scalbert
Good luck on getting 30 people for a triple pod. We have about 5 so far who have commited to the dual. At this rate it doesn't look like we will make the 20 minimum number.
Good luck on getting 30 people for a triple pod. We have about 5 so far who have commited to the dual. At this rate it doesn't look like we will make the 20 minimum number.
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
Come on fellas.. everyone ran their trap and said they wanted one, now a poop load of you pansy asses either bailed out or just forgot completly about it.... LETS GO!!...
Smitty
#76
Parting out 02 Type S :(
Join Date: Mar 2001
Location: LA,CA
Age: 74
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
scalbert, maybe you should of made this an ebay auction. tell everyone here about it. once they bid on it, they are at least obligated by ebay to purchase. this would also ensure the 20 people. just a thought.
#79
on bin laden
Join Date: Feb 2001
Location: Bloomington, MN
Age: 45
Posts: 4,696
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Smitty
We better make it to 20... I freaking sent my check in last friggen week.. PAID...
Come on fellas.. everyone ran their trap and said they wanted one, now a poop load of you pansy asses either bailed out or just forgot completly about it.... LETS GO!!...
Smitty
We better make it to 20... I freaking sent my check in last friggen week.. PAID...
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
Come on fellas.. everyone ran their trap and said they wanted one, now a poop load of you pansy asses either bailed out or just forgot completly about it.... LETS GO!!...
Smitty
#80
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
As far as I have been made aware, just five of us including myself. I faxed in my credit card information early last week.
I sent an email mid day yesterday asking for the status but haven't heard back yet. I'll send another message Monday and will follow up with a call on Tuesday. At that point we can make a determination based on the number of payments thus far.
I sent an email mid day yesterday asking for the status but haven't heard back yet. I'll send another message Monday and will follow up with a call on Tuesday. At that point we can make a determination based on the number of payments thus far.