So , I pulled this switch from the Nevada PaP out of an accord .
I wanna make it do something simple , maybe use it to be the fog light button on/off .
The colors go as shown ....

http://www.flickr.com/photos/mikebikelife/8368935273/http://www.flickr.com/photos/mikebikelife/8368935273/ by http://www.flickr.com/people/mikebikelife/, on Flickr

Anyone know how to go about this ?

 

Just wire power to the switch. Have the switch give power to the fogs. Just some simple wiring.

But if you're going to do that, why not just wire the fog light switch to do that?

 

CLs dont have that switch , TLs do .
btw ,still have all that interior ?

I don't know which wires are power ?

 

That's a lot of wires for a fog light switch

 

 

2 signal wires (power and ground for whatever you're controlling), 1 ground for the dimmer, 1 power for the actual dimmer, and 1 signal for the dimmer... this is all from memory of course, might not be accurate


all of these wires can be sourced from the surrounding buttons.

 

OEM TL fog light switch has that many wires

 

Well damn . Still stumped ...

 

Yea, I still have the interior.


You should just use a multimeter to find which wires do what.

 

What's a multimeter ? Is that the thing with the positive negative things and all the volts or watts choices ?

 

Yes.

I used a TL fog switch to turn on my amp. And yes, I used all of the wires. Some are used to illuminate the button as said above but you can just tap those. There's really only 2 main wires you have to worry about.