Look what the UPS man brought in today
#41
666 Speed
iTrader: (2)
Join Date: Sep 2005
Location: Sinking Spring, PA
Age: 38
Posts: 2,088
Likes: 0
Received 1 Like
on
1 Post
nice hookah. Just bought my second one the other day..
Oh and I second the better stop now as compared to new. I got pads from autozone as opposed to them. Still work great.
Oh and I second the better stop now as compared to new. I got pads from autozone as opposed to them. Still work great.
#42
Originally Posted by artbran
nice hookah. Just bought my second one the other day..
Oh and I second the better stop now as compared to new. I got pads from autozone as opposed to them. Still work great.
Oh and I second the better stop now as compared to new. I got pads from autozone as opposed to them. Still work great.
Thank you. I really hope someone buys those at that price...i know somebody on here wants some nice rotors for a cheap price....
#44
Suzuka Master
iTrader: (10)
Originally Posted by thevikas87
arent those pretty expensive? you think auto zone has those in its "Loan a tool" program haha
Harbor Freight Tools has electric impact guns from 21.99 to 54.99. But I wouldnt get the 89.99 cordless one cause if it doesnt have enough power then the lugs wouldnt be on tight. Not sure if the 21.99 emergency one is strong enough since it only gives 150ft/lbs but the digital one that you can set to a specific tq like 80ft/lbs is quite nice. I think I would get that one. Its 49.99.
#45
Originally Posted by nf3d0149ab
BINGO!!!
I just nabbed them.
Thanks for the tip!
Was it worth upgrading the brake pads?
What kind did you get?
I just nabbed them.
Thanks for the tip!
Was it worth upgrading the brake pads?
What kind did you get?
try that...lol i know not much of a discount but whatever helps i guess?
#46
Originally Posted by aznboi2424
I know walmart sells one that you plug into your cigarette lighter. also good for if you need to change a spare. Maybe about 60 bucks.
Harbor Freight Tools has electric impact guns from 21.99 to 54.99. But I wouldnt get the 89.99 cordless one cause if it doesnt have enough power then the lugs wouldnt be on tight. Not sure if the 21.99 emergency one is strong enough since it only gives 150ft/lbs but the digital one that you can set to a specific tq like 80ft/lbs is quite nice. I think I would get that one. Its 49.99.
Harbor Freight Tools has electric impact guns from 21.99 to 54.99. But I wouldnt get the 89.99 cordless one cause if it doesnt have enough power then the lugs wouldnt be on tight. Not sure if the 21.99 emergency one is strong enough since it only gives 150ft/lbs but the digital one that you can set to a specific tq like 80ft/lbs is quite nice. I think I would get that one. Its 49.99.
these would help get off those impossible to remove bolts right? i know one time worked on a damn bolt for two hours with a stupid socket wrench and it finally came loose...
#48
Originally Posted by nf3d0149ab
Right on!
I will try that on Monday.
Was that an option (Posi Quiets)?
I will try that on Monday.
Was that an option (Posi Quiets)?
yeaa, he has some other ceramic brakes too, but those are the most popular ones plus some ppl on here have tried them and they seem to check out fine, so go for it on monday!
#51
Suzuka Master
iTrader: (10)
Originally Posted by thevikas87
these would help get off those impossible to remove bolts right? i know one time worked on a damn bolt for two hours with a stupid socket wrench and it finally came loose...
#53
Originally Posted by aznboi2424
Depends which bolt. For example the crank pulley bolt is hundreds of ft/lbs. This wont work. These are pretty good at breaking off bolts though. the last two most expensive ones are 240 ft/lbs and thats pretty good. If you cant get a bolt off with a socket wrench only, use a breaker bar.
the only ones i have trouble with are the caliper bolts...the one on top and the one on bottom...there arent any other bolts that i can think would give me trouble besides those...
#54
Si Vis Pacem, Para Bellum
Originally Posted by thevikas87
search for their store on ebay, they have listings starting at 177 and new ones at 232, the 177 ones are the old listings but with the same product, so hurry while you still can get that old price!
#56
666 Speed
iTrader: (2)
Join Date: Sep 2005
Location: Sinking Spring, PA
Age: 38
Posts: 2,088
Likes: 0
Received 1 Like
on
1 Post
the only other screw that might and probably will give you trouble are the 2 screws in each rotor that hold it on. They are a bitch to get out however, if you get a chisel set, you can chisel the one left side of the screw (or whichever way to go counter-clockwise) and get it to turn IF you strip the fucker. You dont need these screws however, if you are the kind of guy that has to put them back in, then I would recommend to put some anti-seize or a bit of grease on the thread of the screw just so if the rotors warp for some reason sometime down the road, you dont have to fight with the screw again to pull it.
#57
Suzuka Master
iTrader: (10)
Originally Posted by thevikas87
the only ones i have trouble with are the caliper bolts...the one on top and the one on bottom...there arent any other bolts that i can think would give me trouble besides those...
#58
Originally Posted by GrandeInter10
Thanks alot bro! I picked em up today and installed. Thank god I'm local. My bro lives down the street from R1 Concepts. And I even got a nice discount for offering to display the R1 Concepts business cards at my shop.
nice! how much did you pick up the package for?
got any pics of the install? or of the results?
#59
Originally Posted by artbran
the only other screw that might and probably will give you trouble are the 2 screws in each rotor that hold it on. They are a bitch to get out however, if you get a chisel set, you can chisel the one left side of the screw (or whichever way to go counter-clockwise) and get it to turn IF you strip the fucker. You dont need these screws however, if you are the kind of guy that has to put them back in, then I would recommend to put some anti-seize or a bit of grease on the thread of the screw just so if the rotors warp for some reason sometime down the road, you dont have to fight with the screw again to pull it.
I think i was reading somewhere that these screws arent necessary to put back in? is that true? or should i go ahead as you said and apply some anti-seize to the screw and put it back in?
#63
Si Vis Pacem, Para Bellum
Originally Posted by thevikas87
nice! how much did you pick up the package for?
got any pics of the install? or of the results?
got any pics of the install? or of the results?
https://acurazine.com/forums/ramblings-12/acura-font-196588/
#64
User Awaiting Email Confirmation
iTrader: (5)
Over and over he kept saying....
Thank you for holding EVERY 20 seconds.
Let me pull up your order.
So you want the Posi Quiets...? Yeah, we can do that. Very popular choice! Please hold.
I had to spell my name out over 10 times (My name is Noah....ONLY 4 LETTERS!!!) Just a minute.
Then I noticed he still got my name wrong on the UPS email!
My friend was chilling at my house and was like WTF!
Thank you for holding EVERY 20 seconds.
Let me pull up your order.
So you want the Posi Quiets...? Yeah, we can do that. Very popular choice! Please hold.
I had to spell my name out over 10 times (My name is Noah....ONLY 4 LETTERS!!!) Just a minute.
Then I noticed he still got my name wrong on the UPS email!
My friend was chilling at my house and was like WTF!
Thread
Thread Starter
Forum
Replies
Last Post
Sarlacc
Console & Computer Gaming
5
09-30-2015 02:15 PM