Intercooler Installation Manual
#41
13.68 @ 102.56
Join Date: Jul 2003
Location: Sorrento, FL
Age: 57
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Chemmech
First, take out the credit card
#44
Team Owner
iTrader: (1)
Join Date: May 2003
Location: Leesburg, Virginia
Age: 41
Posts: 36,474
Received 249 Likes
on
175 Posts
The stock injectors are pretty much maxed out with the E-manage. The E-manage adjusts the pulse width of the injector and basically hold them open longer to add more fuel to each combustion within the cylinder. Adding larger injectors will allow for more fuel to be delivered without maxing out the injector.
errrr something like that
errrr something like that
#45
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
It would aid in even running lower and safer fuel pressures.
It is not absolutely needed as there was a little left in my car with the stock injectors. But it does open the door to future upgrades.
It is not absolutely needed as there was a little left in my car with the stock injectors. But it does open the door to future upgrades.
#50
13.68 @ 102.56
Join Date: Jul 2003
Location: Sorrento, FL
Age: 57
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Smitty
unless you plan on opening up the motor and doing some internal upgrades I would not even bother going with bigger injectors.
#51
13.68 @ 102.56
Join Date: Jul 2003
Location: Sorrento, FL
Age: 57
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
I was just reading on another post were sgmotoring installed new injectors but he had a hard go of it. Does any one know what obstacles he encountered when he tried it? I did a search but all that came up was a reference to him having a hard time doing the install. I'm hoping that this just a "dremmel" operation?? That is the impression that RC gives as well.
#52
Suzuka Master
Thread Starter
Join Date: Sep 2000
Location: Woodstock, GA
Age: 53
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
He had to also swap in new connectors. But that was about it for the installation other than the grinding required.
He had some cold start issues but that should be irrelevant for you as yours will be tuned for the larger squirters. At the time, he had no fuel management.
He had some cold start issues but that should be irrelevant for you as yours will be tuned for the larger squirters. At the time, he had no fuel management.
#53
13.68 @ 102.56
Join Date: Jul 2003
Location: Sorrento, FL
Age: 57
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
That is welcome news for us. These injectors do come with new connectors as well. I just talked with Jason and he did say that RC just instructed us to grind down the area on the fuel rail. RC said that it was a non-essential part of the rail.
Thanks once again Steve.
Thanks once again Steve.
Thread
Thread Starter
Forum
Replies
Last Post
cycdaniel
1G TSX Performance Parts & Modifications
8
12-17-2019 10:58 AM
asahrts
Member Cars for Sale
0
09-04-2015 05:55 PM
prox
5G TLX Problems & Fixes
6
09-01-2015 02:03 AM