Going to PAA Monday Morning
#1
Going to PAA Monday Morning
Question, do you think it would be possible for them to take care of all of the following problems I have in one visit? Hopefully most of it will be covered with the remaining warranty.
Headlamp Condensation (Both)
Rear Defrost Doesn't operate
Brake Rotor Vibration
Chrome on Driver Door handle Chipping Bad
Wheel Alignment Needed (Pulls Left)
Tranny Fluid Change? (I have 38k Mi)
I don't want to go there asking for too much and having them think I am nuts LOL.
Lemme know
tx
PS, What type of loaner do you think i'd get?
#2
On a side note, if they end up replacing both headlight housings, would it be possible to ask for the 03 CL-S housings (The dark housing) instead of the 01 housing?
If not no biggie, but would be nice.
If not no biggie, but would be nice.
#3
recently I has the following done:
Installation of comptech icebox and Sways
front rotors changed (pads/rotors) under TSB
tranny flush and oil change
I sat there from 8:30 to 1pm....not bad!!! of course Jens worked on it at PAA!!
Installation of comptech icebox and Sways
front rotors changed (pads/rotors) under TSB
tranny flush and oil change
I sat there from 8:30 to 1pm....not bad!!! of course Jens worked on it at PAA!!
Trending Topics
#8
Beware of leakage
Joined: Dec 2002
Posts: 19,790
Likes: 0
From: Shreveport, Louisiana, just east of nowhere
Nah, should be able to take car of.
I just recently had both headlights housings replaced, and actually thought about asking for the 03's also, since they had to order them, what would be the big deal, but never got around to asking.
Also just had my front pads replaced and rotors resurfaced under TSB.
I wish I could have Jens or Anthony work on my car, but thats just too far of a drive for some service.
I just recently had both headlights housings replaced, and actually thought about asking for the 03's also, since they had to order them, what would be the big deal, but never got around to asking.
Also just had my front pads replaced and rotors resurfaced under TSB.
I wish I could have Jens or Anthony work on my car, but thats just too far of a drive for some service.
#9
WILLDOGS looks like i'll be seeing you on Monday morning. I've got an appointment to have my CT Exhaust, B-pipe and UR pulleys installed.
However the threat of 6" of snow is gonna be a bitch. Still i'm saying "f*ck you" to mother nature and i'm gonna make the trip.
Should be fun.
However the threat of 6" of snow is gonna be a bitch. Still i'm saying "f*ck you" to mother nature and i'm gonna make the trip.
Should be fun.
#10
Originally posted by Chaptorial
However the threat of 6" of snow is gonna be a bitch. Still i'm saying "f*ck you" to mother nature and i'm gonna make the trip.
However the threat of 6" of snow is gonna be a bitch. Still i'm saying "f*ck you" to mother nature and i'm gonna make the trip.
All is well again.
#11
Unfortunately I won't see you guys there, but I'll be there the next day for my CT stainless brake lines, flush&fill of brake fluid for Castrol, and 15K service .. and a few other things I made a list of
bend CT exhaust straight, check suspension bolts, and investigate the odd rough idle "shudder" I get when braking and coming to a stop.
bend CT exhaust straight, check suspension bolts, and investigate the odd rough idle "shudder" I get when braking and coming to a stop.
#13
Originally posted by Chaptorial
WILLDOGS looks like i'll be seeing you on Monday morning. I've got an appointment to have my CT Exhaust, B-pipe and UR pulleys installed.
However the threat of 6" of snow is gonna be a bitch. Still i'm saying "f*ck you" to mother nature and i'm gonna make the trip.
Should be fun.
WILLDOGS looks like i'll be seeing you on Monday morning. I've got an appointment to have my CT Exhaust, B-pipe and UR pulleys installed.
However the threat of 6" of snow is gonna be a bitch. Still i'm saying "f*ck you" to mother nature and i'm gonna make the trip.
Should be fun.
I am going to be quite in a rush though, since I have to make it into work by 8:30am all the way up in Westchester! lol I am going to try and be a PAA before they even open so I can drop my keys and run.
hopefully I can at least say hi
#15
Beware of leakage
Joined: Dec 2002
Posts: 19,790
Likes: 0
From: Shreveport, Louisiana, just east of nowhere
Originally posted by blader
bend CT exhaust straight, check suspension bolts, and investigate the odd rough idle "shudder" I get when braking and coming to a stop.
bend CT exhaust straight, check suspension bolts, and investigate the odd rough idle "shudder" I get when braking and coming to a stop.
HEy blader do you have 5 a/t or 6 speed ? I get the shuddering idle when coming to a stop also, but it doesn't do it regularly, and mine is 5 a/t.
#16
Yay, dropped it off this morning (a little later than I wanted)
Tom was ultra nice to me, and was going to take care of things.
Sorry I missed you chaptorial, I got there at about 8:20am..guessing you were gone by then.
Good news is I got a sweet 04 TSX loaded as a loaner. Only 3k on the clock.
Very nice car, but underpowered compared to the CL
Tom was ultra nice to me, and was going to take care of things.
Sorry I missed you chaptorial, I got there at about 8:20am..guessing you were gone by then.
Good news is I got a sweet 04 TSX loaded as a loaner. Only 3k on the clock.
Very nice car, but underpowered compared to the CL
#17
Originally posted by Chopper
, lol
HEy blader do you have 5 a/t or 6 speed ? I get the shuddering idle when coming to a stop also, but it doesn't do it regularly, and mine is 5 a/t.
, lol
HEy blader do you have 5 a/t or 6 speed ? I get the shuddering idle when coming to a stop also, but it doesn't do it regularly, and mine is 5 a/t.
Could it be the cold? I think I've only been noticing it since it's been really cold out (not sure though). Maybe the engine is shivering cause its so cold?
#18
Damn.. I just missed all of you guys... I was there Friday morning.. 9am. My rear view mirror decided to break... so they got me in Friday 9AM and I was gone by 9:45am.... worked out well
FYI, Jens does most of the work if they know you're from the board... but honestly... all of their techs are good.
FYI, Jens does most of the work if they know you're from the board... but honestly... all of their techs are good.
#22
SRS light is on for a week or so....and check my brakes....
what if they dont offer, i know they have like a customer shuttle, but that sux, i would love to see the diff between the TSX and my wifes 03 accord....
thx
what if they dont offer, i know they have like a customer shuttle, but that sux, i would love to see the diff between the TSX and my wifes 03 accord....
thx
#24
sometimes they don't have loaners. Upon making your appointment request a loaner, if it is unavailable, you can change your day to the first available with a loaner, thats what I always did. There isn't much worse then wasting your time sitting for your car to be finished, also with the loaner all you do is drop it off at the end of the day, they have late pick-up for your car and it works out great, very convienent.
#25
Originally posted by Reddly9007
sometimes they don't have loaners. Upon making your appointment request a loaner, if it is unavailable, you can change your day to the first available with a loaner, thats what I always did. There isn't much worse then wasting your time sitting for your car to be finished, also with the loaner all you do is drop it off at the end of the day, they have late pick-up for your car and it works out great, very convienent.
sometimes they don't have loaners. Upon making your appointment request a loaner, if it is unavailable, you can change your day to the first available with a loaner, thats what I always did. There isn't much worse then wasting your time sitting for your car to be finished, also with the loaner all you do is drop it off at the end of the day, they have late pick-up for your car and it works out great, very convienent.
#26
That's sweet to get a TSX loaner. The service advisor at my dealer just informed me that they got rid of all their '03 CL/TL loaners and are now giving '04 TL's as loaners...they also have 3 TSX loaners there as well. Will be taking my car in to have my headlights and brakes checked on Wednesday and I will have a loaner available to me. Will take some pics if I get the chance!
#28
WILLDOGS i got the exact same car as you except in silver with black interior. That little TSX was a blast to drive around NJ this morning. The only thing i walked away from the TSX wishing i had in my CL was those gauges.
What time did you end up getting there? I got there at 7:30 and picked up the car at about 12:45, chatted with Jens and then i was out the door.
What time did you end up getting there? I got there at 7:30 and picked up the car at about 12:45, chatted with Jens and then i was out the door.
#29
I got there around 8:20am?
Yeah the TSX is fun to drive, the gauges are awesome! I wanted a TL, but they were all gone. Looks like some guy took the last one.
I am still waiting for my callback. I haven't heard anything from them yet, hope all is well
Yeah the TSX is fun to drive, the gauges are awesome! I wanted a TL, but they were all gone. Looks like some guy took the last one.
I am still waiting for my callback. I haven't heard anything from them yet, hope all is well
#30
Originally posted by WILLDOGS
I got there around 8:20am?
Yeah the TSX is fun to drive, the gauges are awesome! I wanted a TL, but they were all gone. Looks like some guy took the last one.
I got there around 8:20am?
Yeah the TSX is fun to drive, the gauges are awesome! I wanted a TL, but they were all gone. Looks like some guy took the last one.
You mean they had loaner TL's there?
I was the second one there this morning too. They stuffed some lady into an RSX while i got the TSX.
Originally posted by WILLDOGS
I am still waiting for my callback. I haven't heard anything from them yet, hope all is well
I am still waiting for my callback. I haven't heard anything from them yet, hope all is well
#32
^
Oh and speak of the devil. I saw more G35c's putt putting down Rt. 17 this morning, while i was farting around, then i have in 10 months on Long Island. I mean they're everywhere.
I knew those Jersey types were nuts.
:nj:
Oh and I saw one of those grey/anthracite ones and on an over cast day that sucker was looking sweeeet. :wackit:
Oh and speak of the devil. I saw more G35c's putt putting down Rt. 17 this morning, while i was farting around, then i have in 10 months on Long Island. I mean they're everywhere.
I knew those Jersey types were nuts.
:nj:
Oh and I saw one of those grey/anthracite ones and on an over cast day that sucker was looking sweeeet. :wackit:
#35
Well, I called service earlier and they said my car was still being worked on and that they would definitly call me back by the end of the day. Seeing as how they close at 5pm, and they haven't called me back yet, looks like the TSX is mine for the night.
Oh well.
Oh well.
#37
Originally posted by Chaptorial
^
Oh and speak of the devil. I saw more G35c's putt putting down Rt. 17 this morning, while i was farting around, then i have in 10 months on Long Island. I mean they're everywhere.
I knew those Jersey types were nuts.
:nj:
Oh and I saw one of those grey/anthracite ones and on an over cast day that sucker was looking sweeeet. :wackit:
^
Oh and speak of the devil. I saw more G35c's putt putting down Rt. 17 this morning, while i was farting around, then i have in 10 months on Long Island. I mean they're everywhere.
I knew those Jersey types were nuts.
:nj:
Oh and I saw one of those grey/anthracite ones and on an over cast day that sucker was looking sweeeet. :wackit:
Unfortunately, one wasn't mine. I haven't had it out of the garage since December. Summer timers suck in the white stuff.
#40
Well, got the car back here is what they did:
Headlamp Condensation (Both) - Replaced Both Housings
Rear Defrost Doesn't operate - Replaced fuse but blame it on aftermarket connections
Brake Rotor Vibration - Resurfaced and put new pads. The said it was Good Will since it had previously been done to this car already.
Chrome on Driver Door handle Chipping Bad - New one on order.
Wheel Alignment Needed (Pulls Left) - I decided that this could wait.
Tranny Fluid Change? (I have 38k Mi) - Tom advised me not to mess with it since it has the 7/100 warranty anyways. Come back in the sprintime to do it.
Comments:
Awesome service, everyone is extremly nice there. Even other emplyees pass by and say hi to you with a smile. Tom was great and I saw Jens, but he was talking with someone and didn't want to interrupt.
Problem:
They blame the rear defroster for not working properly becasue of "Aftermarket" connections that are present. They replaced the fuse out of good will, but advised me that it will probably blow again, which it already has.
Now, I am not sure what aftermarket wiring they are talking about becasue the only aftermarket item I have on my car is a viper alarm that was installed by a professional installer last week. However, my rear defrost problem was happening way before I had my alarm installed. I fear that they saw the alarm and just made the conclusion that the alarm was the cause of the problem without even looking into it further.
Not sure what to do next. Am I left to figure it out on my own? I am positive that the alarm has nothing to do with it.
Thanks for listening.
Headlamp Condensation (Both) - Replaced Both Housings
Rear Defrost Doesn't operate - Replaced fuse but blame it on aftermarket connections
Brake Rotor Vibration - Resurfaced and put new pads. The said it was Good Will since it had previously been done to this car already.
Chrome on Driver Door handle Chipping Bad - New one on order.
Wheel Alignment Needed (Pulls Left) - I decided that this could wait.
Tranny Fluid Change? (I have 38k Mi) - Tom advised me not to mess with it since it has the 7/100 warranty anyways. Come back in the sprintime to do it.
Comments:
Awesome service, everyone is extremly nice there. Even other emplyees pass by and say hi to you with a smile. Tom was great and I saw Jens, but he was talking with someone and didn't want to interrupt.
Problem:
They blame the rear defroster for not working properly becasue of "Aftermarket" connections that are present. They replaced the fuse out of good will, but advised me that it will probably blow again, which it already has.
Now, I am not sure what aftermarket wiring they are talking about becasue the only aftermarket item I have on my car is a viper alarm that was installed by a professional installer last week. However, my rear defrost problem was happening way before I had my alarm installed. I fear that they saw the alarm and just made the conclusion that the alarm was the cause of the problem without even looking into it further.
Not sure what to do next. Am I left to figure it out on my own? I am positive that the alarm has nothing to do with it.
Thanks for listening.