ktgumbo

Is it ok to use the stock lug nuts on some rims, or no?

JaySyn77

You should have no problems. I used them on mine for about 2 days...until I bought a Gorilla Kit which brought lug nuts & locks.

CLpower

if they fit, you can use them

StanMan

probably not but you will need to check the lug seats on the new wheels. stock lugnuts have a rounded or domed tip that fit onto rounded or domed seats on stock wheels. most aftermarket wheel have a radiused or acorn seat so you will need these types of lugs. using this type of design also helps to make the wheels spin round (ie, lugcentric) if the wheels are not hubcentric.

juniorbean

iTrader: (5)

Like ghander and StanMan said.. you'll need to check your particular rim to see if they'll fit. Mine fit no problem, so I use the factory lugs and lock....

tmk70

The stocks are rounded, my SSR GT1's were conical....make sure you check that before you use them or they won't seat right.

mattg

you can't use the rounded lug nuts on an aftermarket wheel.

nokio

get conical ones ... i used stockers and a few loosened quite a bit before i went out to get new ones