Nashua_Night_Hawk

I did some simulation runs for the CLS-6, CLS-5AT with SC.

The biggest problem is not power... it is traction:

Here is the simulation runs:

245lbft @ 3000 rpms and 297 SAE WHP @ 7000 rpms
Sun Jun 29 03 1:35 pm
Time Slip For:
2001 Acura CLS-5AT Import moded with Comptech SC
0-60 MPH: 4.82s
RT .500
60 ft 2.193
330 ft 5.726
1/8 ET 8.660
1/8 MPH 84.49
1000 ft 11.207
1/4 ET 13.341
1/4 MPH 105.98

261lbft @ 3000 rpms and 307 SAE WHP @ 7000 rpms
Sun Jun 29 03 1:42 pm
Time Slip For:
2003 Acura CLS-6 Import moded Comptech SC
0-60 MPH: 4.61s
RT .500
60 ft 2.063
330 ft 5.653
1/8 ET 8.612
1/8 MPH 86.19
1000 ft 11.131
1/4 ET 13.266
1/4 MPH 106.01


I noted that anything above 300 WHP does NOT increase performance due to lack of traction... example, you reach redline forcing a gear shift before 60'.

TL_Type_S

how do you do these simulations

Red Rider

In fairness Nash, i doubt even with the SC that i'm getting 297whp, more like 275-285 probably. I need a dyno !!

Mike

well.....what r u waiting for??

Nashua_Night_Hawk

with 285 WHP, 235 lbft of Torque:

un Jun 29 03 4:08 pm
Time Slip For:
2001 Acura CLS Import moded with Comptech SC 285 WHP

RT .500
60 ft 2.19
330 ft 5.74
1/8 ET 8.71
1/8 MPH 83.4
1000 ft 11.28
1/4 ET 13.45
1/4 MPH 104.37

Nashua_Night_Hawk

I am using Drag Racing anaylzer

typeR

can you back end it and add times and get HP...say the times in my sig and tell me what im putting down?

Nashua_Night_Hawk

sure.. I will try...

215 lbft of Torqu and 257 WHP at 7000 rpm.

Sun Jun 29 03 7:26 pm
Time Slip For:
2001 Acura CLS Import moded with 3.5L 257 WHP
0-60MPH: 5.27s
RT .500
60 ft 2.21
330 ft 5.87
1/8 ET 8.92
1/8 MPH 81.1
1000 ft 11.58
1/4 ET 13.82
1/4 MPH 100.89

darrinb

the auto aint gonna run 13.3, my ass

SLY1TYPES

what does it say for headers and intake on 6-spd or just intake?

zigzagzig

and 0-60 in 4.61 sec

Nashua_Night_Hawk

let me know the whp andd tq and i will run the sim for yo

typeR

260hp/232lb.ft

Nashua_Night_Hawk

You mean stock engine?

Nashua_Night_Hawk

176 lbft of Torque and 195 SAE WHP @ 6200 rpms:

Mon Jun 30 03 12:08 am
Time Slip For:
2001 Acura CLS Import Stock
0-60 MPH: 6.45s
RT .500
60 ft 2.34
330 ft 6.32
1/8 ET 9.62
1/8 MPH 75.5
1000 ft 12.49
1/4 ET 14.93
1/4 MPH 92.54

Nashua_Night_Hawk

All sim, weather is, Cold and nice and dry:
AP: 30.45 inch
Temp: 50F
Dew Point: 20.2

Red Rider

Hammer and i need to run, me with the SC and him with his new ZZZZZZZZZZZZZ. Maybe we'll get out there soon.

Red Rider

Maybe. His other #s for the stock are right on. Mattg has run a 14.1, add the SC and get half a second or more and you're almost there. Remember, the auto doesn't lose the boost on shift like the 6MT.

Nashua_Night_Hawk

200 lbft and 240 SAE WHP (CLS-6 with CT Headers):

Mon Jun 30 03 1:08 am
Time Slip For:
2003 Acura CLS-6 Import moded with CT headers
0-60MPH: 5.55s
RT .500
60 ft 2.19
330 ft 5.98
1/8 ET 9.19
1/8 MPH 78.6
1000 ft 11.89
1/4 ET 14.19
1/4 MPH 97.45

Nashua_Night_Hawk

210 lbft and 224 SAE WHP @ 6200 rpms (CLS-6 with Excellent CAI):

Very Intersting!

Mon Jun 30 03 1:32 am
Time Slip For:
2003 Acura CLS-6 Import moded CAI
0-60MPH: 5.57
RT .500
60 ft 2.19
330 ft 5.98
1/8 ET 9.18
1/8 MPH 78.8
1000 ft 11.88
1/4 ET 14.20
1/4 MPH 97.13

Nashua_Night_Hawk

205 lbft and 218 SAE WHP @ 6200 rpms (CLS-6 with GOOD CAI):

Mon Jun 30 03 1:36 am
Time Slip For:
2003 Acura CLS-6 Import moded CAI
0-60MPH: 5.65
RT .500
60 ft 2.19
330 ft 5.99
1/8 ET 9.22
1/8 MPH 78.1
1000 ft 11.95
1/4 ET 14.29
1/4 MPH 96.21

Nashua_Night_Hawk

200 lbft and 212 SAE WHP @ 6200 rpms (CLS-6 Stock):

Mon Jun 30 03 1:41 am
Time Slip For:
2003 Acura CLS-6 Import Stock
0-60MPH: 5.75s
RT .500
60 ft 2.19
330 ft 6.02
1/8 ET 9.27
1/8 MPH 77.3
1000 ft 12.03
1/4 ET 14.38
1/4 MPH 95.29

Nashua_Night_Hawk

Note: all 60' for the CLS-6 are 2.19s!

ga2000

where is that site where you can adjust your time with putting better weather conditions in i heard of a site you can do it

CLS2001_97124

Very interesting!! Does this program take weight into account? Or does it just use the stock curb weight? I think my car is a few hundred pound heavier due to my stero, kit, and golf bag...

Nashua_Night_Hawk

Yes, differenct weight. I used 3620 lbs (as weighted on the scale at the drag strip)

r10apple

This seems extremely accurate--simulation or not. Makes me laugh at the stupid C&D article even more!

typeR

no WHP

typeR

can you make it with the 2.068 60' and 13.79at 101.54 oh ya i think im at about 3725lbs. with driver and i take the car to the rev limiter at 7200