Diy Ballast OEM-to-Aftermarket conversion

Reply Subscribe

Thread Tools

Search this Thread

03-13-2016 | 06:20 PM

#81

thoiboi

Senior Moderator

Joined: Apr 2010

Posts: 47,394

Likes: 8,796

From: SoCal, CA

Quote:

Originally Posted by Acuratl3535

Is there any way to upload the pics from this DIY? All I need to know is if I need to cut the old wire going to the old ballast(has a gray adapter at the end) and then splice that into the new wiire running from new ballast? Also where to mount new ballast? Thank you

You can buy an adapter so it's plug and play. Or you can cut it . Mount any where, bumper support, where the old ballast is, etc etc

Reply Like

11-09-2016 | 08:13 PM

#82

amachvt

1st Gear

Joined: Nov 2016

Posts: 1

Likes: 0

Missing Pictures!

Great writeup on your conversion! I have a set of Kensun 35w 6000K's coming to me so I'm preparing for the install. Yours is the best post I've seen on the subject but unfortunately the pictures are not downloading with the post (just red x's). I was wondering if you still have the pictures that you can email to me. I could really use the visuals with how you mounted the ballasts and spliced in the OEM power source. If not, no big deal but thought I'd ask.

Thanks!

Reply Like