Currently working on a full Bodykit for the CL, (updated on pg.5)
#1
Currently working on a full Bodykit for the CL, concepts inside!
I am currently working on two kits, the 2004 TL full bodykit, bumper replacement and all, and the other is up in the air. Now that the CL is discontinued, it would be a bold move to produce a kit for it, ut I am determined to remain loyal to the CL-S and put one out there to finally give us justice. here is a preliminary conceptual design, I will be making the kit bumper replacment, front and rear as well as sideskirts. I am also contemplating making grille kits that would just replace the whole grille, outer, inner and mesh. it would be similar to the mugen type grille for the 2000 tl. here is an image, and obviously this is all going to be under the RonJon Design Co. brand name. There will be an update in the news section of the site. enjoy:
![](http://reklesart.com/acura/clskit.jpg)
#5
Senior Moderator
very interesting. i think i might like it better if the lower grill went all the way across. it's awesome that you are working on this, big props to you.
thanks for the photo credit.
thanks for the photo credit.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Trending Topics
#8
I like the fact that there is no opening down across the middle, gives it a non-stock look which is what you are trying to achieve when you install a bodykit, I hope. here is a slightly differnt angle, but with a more realistic lower part. a little crude, but informative. I may tone it down a bit also.
![](http://reklesart.com/acura/clkit2.jpg)
#13
Team Owner
iTrader: (1)
Join Date: May 2003
Location: Leesburg, Virginia
Age: 41
Posts: 36,474
Received 249 Likes
on
175 Posts
Originally posted by Bobbydoedoe
hmmmm not my taste but i still think the sema kit looks the best compare to the other kits for the cl
hmmmm not my taste but i still think the sema kit looks the best compare to the other kits for the cl
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
Make a SEMA kit duplicate. Your prototype is a little over the top.
Huge props for taking the time and effort to even consinder producing one though
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#14
Suzuka Master
Join Date: Nov 2001
Location: TEXAS
Age: 43
Posts: 6,085
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rondog
I like the fact that there is no opening down across the middle, gives it a non-stock look which is what you are trying to achieve when you install a bodykit, I hope. here is a slightly differnt angle, but with a more realistic lower part. a little crude, but informative. I may tone it down a bit also.
I like the fact that there is no opening down across the middle, gives it a non-stock look which is what you are trying to achieve when you install a bodykit, I hope. here is a slightly differnt angle, but with a more realistic lower part. a little crude, but informative. I may tone it down a bit also.
![](http://reklesart.com/acura/clkit2.jpg)
sidemarker
#19
I'm Cool
Join Date: Jan 2002
Location: Diamond Bar, CA
Age: 39
Posts: 2,054
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mrsteve
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
Make a SEMA kit duplicate. Your prototype is a little over the top.
Huge props for taking the time and effort to even consinder producing one though
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
Make a SEMA kit duplicate. Your prototype is a little over the top.
Huge props for taking the time and effort to even consinder producing one though
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#21
Burning Brakes
Join Date: Jul 2003
Location: Baltimore, MD
Age: 48
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
SEMA all the way...
I'm having a local shop look into fabricating a look-a-like at the moment. I imagine the sticker shock will bring me back to reality though. Love the style of the SEMA kit... pure class.
I'm having a local shop look into fabricating a look-a-like at the moment. I imagine the sticker shock will bring me back to reality though. Love the style of the SEMA kit... pure class.
#25
Poppin them thangs
Join Date: Nov 2003
Location: Mississauga, ON, CAN
Age: 52
Posts: 1,095
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ant7701
nice kit man...what you should do is make lip kits like the second gen tl's that are direct fit to our cl's!!
nice kit man...what you should do is make lip kits like the second gen tl's that are direct fit to our cl's!!
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
#27
I hate the Mets
Join Date: Jun 2002
Location: Philly Burbs
Age: 45
Posts: 4,994
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Zapata
that lower diffuser ara i don't like. I think it'll look better if it wee uniform accross. Mad props for the efforts
that lower diffuser ara i don't like. I think it'll look better if it wee uniform accross. Mad props for the efforts
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#28
CLS 6MT Navi
Thanks for your work, I love that you are committed to the CL when so many are leaving it for the hottest new thing. I read that Z sales are down already.
I agree with many here, my taste is more for the Sema kit. The thing about the CL is, it is a conservative but refined design that just needs some help with it's existing lines. The Sema does that well.
I'd want a kit that doesn't look like an add-on kit for this car.
I'm sure some would be interested in a more dramatic look but I think the more subdued enhancement like the Sema would sell more. The CL style is about refinement, understatement.
I'm usually Not a kit buyer but the CL needs a little enhancement.
For the sleeker 04 TL look the headlights on the CL are too fat and round. The TL works cause the headlights are horizontal.
The curvy lines you have below the headlights that extend from the hood edge narrows the look, the CL needs widening and lowering. I agree the lower part needs to be more horizontal, not broken up. I do like the pointed center line, this is reminiscent of the CLS prototype. I wonder how an ugly license plate would ruin this.
Sorry if I act like I know what I'm talking about, I'm sure you've put a lot more thought into this than me. but I think you're getting some good feedback from the forum. I'd love to buy a kit that enhances the CLs refined yet strong lines. thanks.
I agree with many here, my taste is more for the Sema kit. The thing about the CL is, it is a conservative but refined design that just needs some help with it's existing lines. The Sema does that well.
I'd want a kit that doesn't look like an add-on kit for this car.
I'm sure some would be interested in a more dramatic look but I think the more subdued enhancement like the Sema would sell more. The CL style is about refinement, understatement.
I'm usually Not a kit buyer but the CL needs a little enhancement.
For the sleeker 04 TL look the headlights on the CL are too fat and round. The TL works cause the headlights are horizontal.
The curvy lines you have below the headlights that extend from the hood edge narrows the look, the CL needs widening and lowering. I agree the lower part needs to be more horizontal, not broken up. I do like the pointed center line, this is reminiscent of the CLS prototype. I wonder how an ugly license plate would ruin this.
Sorry if I act like I know what I'm talking about, I'm sure you've put a lot more thought into this than me. but I think you're getting some good feedback from the forum. I'd love to buy a kit that enhances the CLs refined yet strong lines. thanks.
#31
'Big Daddy Diggler'
rondog that looks hot, but doesnt the CL need the middle to be opened for the radiator. The cl and 2nd gen TL dont rely on the upper grill, but rely on the lower middle grill area for cooling. If you can incorporate scoops behind the left and right grills to cool the radiator, you will be golden because that kit is on another level.
#38
Revving at 9K...
The 2nd version is HOT HOT HOT!!!
rondog, I have a lot of respect for you for what you are doing, and the method which you are doing it.
I'll get in on that action too, I need a need look for the car.
rondog, I have a lot of respect for you for what you are doing, and the method which you are doing it.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#39
Changin bulbs since '73
iTrader: (1)
Join Date: Dec 2001
Location: Chi-town burbs
Age: 51
Posts: 8,111
Likes: 0
Received 12 Likes
on
4 Posts
My friend....that second set of photos is fuckin unbelievable!!!!
Ding ding ding !! We have a winner here. That is the truly the best looking thing i have seen for our cars. Make it ... please :beg:
:wackit:
Ding ding ding !! We have a winner here. That is the truly the best looking thing i have seen for our cars. Make it ... please :beg:
![EEK!](https://acurazine.com/forums/images/smilies/eek.gif)
#40
Changin bulbs since '73
iTrader: (1)
Join Date: Dec 2001
Location: Chi-town burbs
Age: 51
Posts: 8,111
Likes: 0
Received 12 Likes
on
4 Posts
Originally posted by rondog
sorry, but I'm not going to do something that is a replica, or a knock off. I will tune the front to what we feel is the best by a majority . here is an altered version that actually uses the stock openings and driving lamps on the 01-02.
sorry, but I'm not going to do something that is a replica, or a knock off. I will tune the front to what we feel is the best by a majority . here is an altered version that actually uses the stock openings and driving lamps on the 01-02.
![](http://reklesart.com/acura/clkit3.jpg)
![](http://reklesart.com/acura/clkit4.jpg)
![Butt Head](https://acurazine.com/forums/images/smilies/butthead.gif)
![Butt Head](https://acurazine.com/forums/images/smilies/butthead.gif)
![Alert](https://acurazine.com/forums/images/smilies/alert.gif)