Blow me Comptech...
#81
Im so sorry if this is OFF topic which it DEF. is BUT!!!!! i tried this program 2 weeks ago and it making some serious $$$ and its totally legit! so i've been telling all my internet friends and just everyone i know. This is not a scam its me 6sp_03 go here if your intrested if not i totally understand. So far ive made like 1,500.00 in 2 weeks with hardly any work!! :-) ILOVEIT!!
http://www.dontforgettotakeyourvitam...com/hardy17512
http://www.dontforgettotakeyourvitam...com/hardy17512
#82
Thread Starter
Former Sponsor
iTrader: (1)
Joined: Oct 2001
Posts: 8,320
Likes: 129
From: yonkers, NY
update, this thread will hopefully come to an end with a solution.
I had the pulley machined at a machine shop, they made the pulley 1 mm less at the neck (not the 2.5mm I thought iut was). I got a wahser and milled it down to .7mm and put it on, so far so good, but under high rpm's underhood, the belt looks like it vibrates a bit between the two pulleys, where it's just connected them and not touching anything. I'll post up if it stays on for good.
I had the pulley machined at a machine shop, they made the pulley 1 mm less at the neck (not the 2.5mm I thought iut was). I got a wahser and milled it down to .7mm and put it on, so far so good, but under high rpm's underhood, the belt looks like it vibrates a bit between the two pulleys, where it's just connected them and not touching anything. I'll post up if it stays on for good.
#83
Interior
Hopefully you got all those SC issues fixed. I just had a question about the dash lighting. Did you install white LED's? It looks brighter than the stock greenish color, both in the Tach and the Radio?
I like it BTW.
I like it BTW.
Thread
Thread Starter
Forum
Replies
Last Post
detailersdomain
Wash & Wax
3
10-09-2015 10:13 PM